TriniTuner.com  |  Latest Event:  

Forums

looking for raw components

(I.C.E.)In Car Entertainment - Mobile Audio and Video

Moderator: 3ne2nr Mods

speedmelter
18 pounds of Boost
Posts: 2333
Joined: October 1st, 2011, 7:15 pm
Location: counting stars..

looking for raw components

Postby speedmelter » March 11th, 2016, 10:25 am

im looking for a good set of raw 3 way drivers,

i.e. pair of tweeters
pair of midrange 4"
pair of midbass 6"

all designed to go with each other

Advertisement

speedmelter
18 pounds of Boost
Posts: 2333
Joined: October 1st, 2011, 7:15 pm
Location: counting stars..

Re: looking for raw components

Postby speedmelter » March 11th, 2016, 1:08 pm

how do you power that 4 inch midrange without blowing it?

I also notice some of those other midranges need 2- 3 litres sealed to achieve that response. how do u manage to supply it with that much space on the a pillar?

User avatar
Sully
TriniTuner 24-7
Posts: 7554
Joined: April 21st, 2003, 8:58 am
Contact:

Re: looking for raw components

Postby Sully » March 11th, 2016, 3:01 pm

Used or new?

I have a set of drivers that I recently removed from my previous install that I will part with for a reasonable price.

DynAudio
Esotec MD102 1" Soft Done Tweeter
Esotec MD142 3" Dome Midrange
Esotec MW162 6-1/2" Woofer

speedmelter
18 pounds of Boost
Posts: 2333
Joined: October 1st, 2011, 7:15 pm
Location: counting stars..

Re: looking for raw components

Postby speedmelter » March 11th, 2016, 6:14 pm

preferably new. the rest of my system so far is new. can someone guide me towards a bunch that would be good?

blaine
Street 2NR
Posts: 84
Joined: June 9th, 2008, 6:15 pm

Re: looking for raw components

Postby blaine » March 11th, 2016, 10:39 pm

I got some Morel MT23 tweeters and Hybrid 6" mid bass drivers by Safe and Sound in Marabella. I assume they may have the midrange drivers also. Highly recommended. Excellent drivers and second to none service.

speedmelter
18 pounds of Boost
Posts: 2333
Joined: October 1st, 2011, 7:15 pm
Location: counting stars..

Re: looking for raw components

Postby speedmelter » March 12th, 2016, 12:49 pm

i will visit there and seek advice. thanks

User avatar
Soundstream_626
Riding on 17's
Posts: 1424
Joined: March 13th, 2005, 8:01 pm
Location: san juan
Contact:

Re: looking for raw components

Postby Soundstream_626 » March 12th, 2016, 4:04 pm

If you`re crossing a mid over 250hz up, airspace is not really an issue. Also, and it can do 102db with 32 watts. Mounting it in a pillar maybe tough. Most mids I`ve seen, if they handle more power aren`t as sensitive because the coil is now heavier. Thats the trade off. Really tough to get a matching brand set.

The best tested midrange has been the Scanspeak 10F but thas like 100us and handles 15 watts rms.

you can try this tymphany if youre willing to go different brand on the mid.

http://www.parts-express.com/tymphany-n ... --264-1128

speedmelter
18 pounds of Boost
Posts: 2333
Joined: October 1st, 2011, 7:15 pm
Location: counting stars..

Re: looking for raw components

Postby speedmelter » March 13th, 2016, 3:26 pm

these speakers cost way less than the ones like hybrid audio and morel which ive have checked out so far.

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 21484
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: looking for raw components

Postby nervewrecker » March 13th, 2016, 3:39 pm

Seeing good reviews on the tang band bamboo 3" and 4" as a mid as well.

Sent from my ONE E1005 using Tapatalk

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 21484
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: looking for raw components

Postby nervewrecker » March 13th, 2016, 4:44 pm

I actually thought of using a set with some exodus anarchy woofers. But tough luck finding the exodus.
Still contemplating using a set with my morels but I understand it's very tricky to get that arrangement right.

Sent from my ONE E1005 using Tapatalk

User avatar
nigel1977
punchin NOS
Posts: 4054
Joined: April 27th, 2004, 8:00 pm
Contact:

Re: looking for raw components

Postby nigel1977 » March 13th, 2016, 7:19 pm

Hybrid Audio Technologies.

Either Unity, or Legatia will suit you fine.


http://www.audiophiletrading.com

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 21484
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: looking for raw components

Postby nervewrecker » March 13th, 2016, 7:37 pm

Legatia and done yes.

Sent from my ONE E1005 using Tapatalk

User avatar
L'Audi
Sweet on this forum
Posts: 275
Joined: February 17th, 2016, 3:05 pm
Location: Long Island, NY

Re: looking for raw components

Postby L'Audi » March 14th, 2016, 11:21 am

IF you're on a budget:

https://www.madisoundspeakerstore.com/s ... wool-cone/ (I currently have mine crossed at 50hz with a 24db slope. DEADEN your doors!!!)

Paired with:

https://www.madisoundspeakerstore.com/a ... ull-range/

-I've had better-than-expected results with these. :drinking:

speedmelter
18 pounds of Boost
Posts: 2333
Joined: October 1st, 2011, 7:15 pm
Location: counting stars..

Re: looking for raw components

Postby speedmelter » March 14th, 2016, 12:07 pm

I have the h800 sitting here and would really like to utilise it fully hence me wanting to go 3 way active.

I need to search around in the car some more because I think it has a spot for a centre speaker on the dashboard.

User avatar
L'Audi
Sweet on this forum
Posts: 275
Joined: February 17th, 2016, 3:05 pm
Location: Long Island, NY

Re: looking for raw components

Postby L'Audi » March 14th, 2016, 2:55 pm

nervewrecker wrote:But tough luck finding the exodus.

Sent from my ONE E1005 using Tapatalk


http://www.diysoundgroup.com/anarchy-wo ... -4ohm.html :drinking:

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 21484
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: looking for raw components

Postby nervewrecker » March 14th, 2016, 5:04 pm

L'Audi wrote:
nervewrecker wrote:But tough luck finding the exodus.

Sent from my ONE E1005 using Tapatalk


http://www.diysoundgroup.com/anarchy-wo ... -4ohm.html :drinking:


Are these available? I know the site is there, not sure if they were in stock.

You have me thinking now.

User avatar
L'Audi
Sweet on this forum
Posts: 275
Joined: February 17th, 2016, 3:05 pm
Location: Long Island, NY

Re: looking for raw components

Postby L'Audi » March 14th, 2016, 5:49 pm

nervewrecker wrote:
L'Audi wrote:
nervewrecker wrote:But tough luck finding the exodus.

Sent from my ONE E1005 using Tapatalk


http://www.diysoundgroup.com/anarchy-wo ... -4ohm.html :drinking:


Are these available? I know the site is there, not sure if they were in stock.

You have me thinking now.


I may or may not have just ordered a pair. :wiggle:

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 21484
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: looking for raw components

Postby nervewrecker » March 14th, 2016, 6:42 pm

Let me know how it goes.

User avatar
SR
Chief Cook & Instigator
Posts: 13574
Joined: April 7th, 2003, 8:11 pm

Re: looking for raw components

Postby SR » March 15th, 2016, 1:41 pm

http://www.dlsaudio.us/product-details/93
Can be ordered


Or dls 2.5 midrange driver with a pair of dls rc6.2 components
http://www.dlsaudio.us/product-details/28
http://www.dlsaudio.us/product-details/23
Can supply raw drivers alone

Available now

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 21484
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: looking for raw components

Postby nervewrecker » March 28th, 2016, 3:01 pm

L'Audi wrote:
nervewrecker wrote:
L'Audi wrote:
nervewrecker wrote:But tough luck finding the exodus.

Sent from my ONE E1005 using Tapatalk


http://www.diysoundgroup.com/anarchy-wo ... -4ohm.html :drinking:


Are these available? I know the site is there, not sure if they were in stock.

You have me thinking now.


I may or may not have just ordered a pair. :wiggle:


anything yet?

User avatar
L'Audi
Sweet on this forum
Posts: 275
Joined: February 17th, 2016, 3:05 pm
Location: Long Island, NY

Re: looking for raw components

Postby L'Audi » March 28th, 2016, 4:22 pm

nervewrecker wrote:
L'Audi wrote:
nervewrecker wrote:
L'Audi wrote:
nervewrecker wrote:But tough luck finding the exodus.

Sent from my ONE E1005 using Tapatalk


http://www.diysoundgroup.com/anarchy-wo ... -4ohm.html :drinking:


Are these available? I know the site is there, not sure if they were in stock.

You have me thinking now.


I may or may not have just ordered a pair. :wiggle:


anything yet?


Got em a few days after posting this. The project is still in the drawing board stage though... Playing around with them though - WHOA.

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 21484
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: looking for raw components

Postby nervewrecker » March 28th, 2016, 4:47 pm

Oh, so they are available then.
Interesting...

Sent from my ONE E1005 using Tapatalk

Advertisement

Return to “I.C.E. / Car Audio Tech”

Who is online

Users browsing this forum: No registered users and 5 guests