Moderator: 3ne2nr Mods
nigel1977 wrote:Sounds like you have a lot of other issues.
Hint. Acoustic phase is not the same as electrical Phase.
You'd want to be sure all speakers are in acoustic phase.
infinite_RPM wrote:Its highly possible as I changed one of the doors because I got into an accident is possible the speaker wires got mixed up when the guys reconnected everything. Also the door that changed had sound dampening..
evolution7tt wrote:How about, you use the two 2 channel amps you have on the front stage, put the focals on deck power , and maybe consider putting the midrange high up on the dash or pillar, on axis.
So use the woofers on one amplifier and then the mid and tweeter on the other amplifier.
kavaninho wrote:^ those things contribute to better SQ....but for the loudness part, not so much gains.
infinite_RPM wrote:It's biased to the front cause I don't like how music sounds behind my head.. that's why I wanna build up the front doors.. the focals basically wasted in the rear..
I'm not sure if it's the location of the mid speaker in the kicks and my legs block it out or what..
infinite_RPM wrote:I buy two Dayton ref 8" for the front doors, the tens I have are way to big.. A pair of dome mids and I had Dayton reference tweets from before.. The freq ranges extend well into each component so I still tryna figure out cross points.
Return to “I.C.E. / Car Audio Tech”
Users browsing this forum: No registered users and 28 guests