Amp wiring question.

SYKO · Postby **SYKO** » March 29th, 2018, 10:30 pm

So jus an update....i've come a long way in the tweaking. Mids sounding real nice and loud. Well i also changed my preamp and now have a massive audio eq7, says it has an 8volt line driver.
Now i believe i can get alot louder with Some more tweaks, or if the mid bass is swapped out.
Gonna experiment on my drivers by taking out the resistors and listen to the difference.

Postby **nervewrecker** » March 30th, 2018, 11:17 pm

Dont overdrive the amps though.

Glad you liking it.

Make sure the drivers crossed within range and you shouldn't have any issues.

SYKO · Postby **SYKO** » March 30th, 2018, 11:23 pm

nervewrecker wrote:Dont overdrive the amps though.

Glad you liking it.

Make sure the drivers crossed within range and you shouldn't have any issues.

So far yes. Well gains on my amp are like quarter for the drivers and less than half for the mids. Preamp on a bit more than half and will have the deck on probably 27 at most. Goes to 40.
But yes will experiment with the drivers.
After using a boss 4ch to run my entire system dor about 4 years, im sorry i didnt do this sooner.

Postby **nervewrecker** » March 30th, 2018, 11:28 pm

Gains should be on zero (5v) if you have 8v lone drive. Amd should max out before reaching top volume.
Try it and see.
But I see what you did. You used the gain to increase the sensitivity to the mids so they will be louder than the drivers for some sort if level control

SYKO · Postby **SYKO** » March 30th, 2018, 11:31 pm

nervewrecker wrote:Gains should be on zero (5v) if you have 8v lone drive. Amd should max out before reaching top volume.
Try it and see.
But I see what you did. You used the gain to increase the sensitivity to the mids so they will be louder than the drivers for some sort if level control

Ohhhh, will experiment with that. Well in my case it will be at 6v.