* Offical AE111 Levin Forum *

stev · Postby **stev** » December 10th, 2012, 10:50 am

hey guys, i finally took a spin in bamboo....basically, all my parts I needed for the Trueno so far came from Raj's Used Parts:

663-4725 or 787-3659

he's located on the second corner on ur right when u enter the bamboo. (not hard to find)

call him and ask him if he has the parts any of u need, i believed one of the workers there had a levin also.

gonna buy some skirts from him in January.

taurine · Postby **taurine** » December 11th, 2012, 4:53 pm

thanks stev much appreciated...

stev · Postby **stev** » January 19th, 2013, 11:36 am

so right now i have a 1.6 4AFE in the trueno. Later on i would like to drop in a 3SGTE or 20 Valve.

any advice on the 2? anyone did any conversions before with their levin / trueno?

taurine · Postby **taurine** » January 27th, 2013, 2:10 pm

never did a conversion on mine but the 3SGTE may need some fabrication to fit properly as apposed to the 20V being bolt for bolt...you thinking silvertop or blacktop?

Postby **Hook** » January 27th, 2013, 9:13 pm

If you're thinking 20V, go for the blacktop. Parts and sensors are so much easier to get for it as it's "newer". Plus that MAF is a pain in the ass sometimes. I'd like to convert to MAP sensor on my silvertop some day, but it'll hafta do for now.

Anyway guys. I need your help on locating rear disc rotors for the GT. Methinx they're the same 258mm diameter as the front (have yet to actually measure them), solid (not vented) and 4*100 PCD (of course).
Can the rear hats from a SiR or Integra work?

Also, can anyone really confirm if the flex lines for the rear disc brakes are the same as the front lines on an AE80?

TESTED performance · Postby **TESTED performance** » January 30th, 2013, 1:21 pm

Trying to locate a full rear disc brake setup right now and would be willing to sell the rotors if the price is right.

DJShortCircuit · Postby **DJShortCircuit** » March 8th, 2013, 8:17 am

have a few small parts for sale
viewtopic.php?f=6&t=468280

stev · Postby **stev** » March 8th, 2013, 9:32 pm

DJShortCircuit wrote:have a few small parts for sale
viewtopic.php?f=6&t=468280

rel good stuff here man...will call u in a few days. wanna get the AC vents. :lol:

DJShortCircuit · Postby **DJShortCircuit** » March 8th, 2013, 9:50 pm

stev wrote:
DJShortCircuit wrote:have a few small parts for sale
viewtopic.php?f=6&t=468280

rel good stuff here man...will call u in a few days. wanna get the AC vents.

ok kool man, jus call wen u ready

stev · Postby **stev** » April 21st, 2013, 9:57 pm

car will be undergoing a lot of repairs / maintenance over the next few months.....im gonna change my shocks as well....any advice? im thinking gas and oil...but i dont know much about shocks and prices :oops:

demogorgon15 · Postby **demogorgon15** » April 24th, 2013, 1:10 pm

Ello,

Does anyone know if the ae111 levins dashboard can fit / be used in an ae101 levin?

ae101:

ae111:

black start · Postby **black start** » April 24th, 2013, 1:46 pm

viewtopic.php?f=32&t=433857

stev · Postby **stev** » April 24th, 2013, 3:28 pm

lets hope a mod merges the thread.

OP that is a very hard question to answer. :lol:

i assume u have the AE101 levin and want to use the AE111 dashboard.

post some detailed pics and info of your dashboard if u remove it....that is, some dimensions, location of clips / holes etc......i may be able to tell u if its possible.

if u find a levin user manual / dis-assembly guide etc online, let me know.....i lookin for one for d longest while now.

black start · Postby **black start** » April 24th, 2013, 3:32 pm

stev you fix the broadside on yuh car oar?

Or is another levin I pass by krish?

stev · Postby **stev** » April 24th, 2013, 3:37 pm

black start wrote:stev you fix the broadside on yuh car oar?

Or is another levin I pass by krish?

its another levin u pass :lol:

boy i aint getting d time to fix it as yet...work have me rel busy and i need d car. lol

most likely next month

black start · Postby **black start** » April 24th, 2013, 3:40 pm

Oar, when i see it I say man like stev paint up over and thing....lolz...

you ever found the hit and run character?

stev · Postby **stev** » April 24th, 2013, 3:44 pm

black start wrote:Oar, when i see it I say man like stev paint up over and thing....lolz...

you ever found the hit and run character?

yeh...the driver was not the owner of the vehicle. lol

i found the real owner (living up in freeport) and he accepted responsibility. Insurance paperwork and stuff organize already....its just the time i need.

black start · Postby **black start** » April 24th, 2013, 3:56 pm

well thats good to hear man....

paint job + 4a-ge on 7psi

stev · Postby **stev** » April 25th, 2013, 3:28 pm

somebody cud tell me why d hell a front (upper) strut bar so hard to find? steups.

demogorgon15 · Postby **demogorgon15** » April 25th, 2013, 6:41 pm

Try TSC I think he has.

stev wrote:somebody cud tell me why d hell a front (upper) strut bar so hard to find? steups.

black start · Postby **black start** » April 25th, 2013, 11:38 pm

stev wrote:somebody cud tell me why d hell a front (upper) strut bar so hard to find? steups.

viewtopic.php?f=12&t=331355

stev · Postby **stev** » April 26th, 2013, 12:49 am

wtf? i did a search a hundred times and never found that. thanks buddy

demogorgon15 · Postby **demogorgon15** » April 26th, 2013, 7:22 am

searching on tuner is a PITA, theres someone in the classifieds section thats selling a blacktop intake cam pulley and for the life of me I cant find it again.

Postby **Hook** » April 26th, 2013, 11:19 am

^^^ man, if we could get those in here brand new in bulk that'll be awesome eh :lol:

quiet 20Vs all around

demogorgon15 · Postby **demogorgon15** » April 26th, 2013, 2:01 pm

I shame, the other night meh friend ask me if I running diesel

Postby **Hook** » April 26th, 2013, 6:58 pm

mine is selective. Some days, noisy as fcuk, other days it's dead silent.

demogorgon15 · Postby **demogorgon15** » April 27th, 2013, 8:38 pm

Prices from MRP LTD ( www.mrpltd.co.nz ):

The VVT Cam Pulleys are $420NZD.

Normal shipping with no tracking is $45NZD
Tracking option is $100NZD

The price for the pulley is actually $420NZD"

So the cost of the pulley + shipping should be around $2,765 TTD

stev · Postby **stev** » April 28th, 2013, 1:04 am

so my hand brake cable buss.

went lookin all over but apparently the AE111 one cant work. (short cable for d front).

bamboo had too much traffic to look around today.

black start · Postby **black start** » April 28th, 2013, 1:20 am

^ent I tell you check billy's dan....

stev · Postby **stev** » April 28th, 2013, 1:24 am

dem was d first place i went but d one they have cant work.

did some maintenance today....change plugs, oil, filter, transmission fluid. when i was tightening the hand brake...it buss (wen i pull it)

trying out Shell helix.....Mobil 1 not workin for me at all.

changed all 4 stabilizer links....dem ting was making d car rel noisy.

everything i get from Billy's. $1058 was d bill :shock:

i thought it would have been more.