|  Latest Event:  


rx 70 1jz

It's all about 4AGE, NZE, 3SGTE, 1JZ, 2JZ etc.

Moderator: 3ne2nr Mods

Information Officer
Street 2NR
Posts: 36
Joined: August 18th, 2010, 8:14 am

rx 70 1jz

Postby Information Officer » April 19th, 2018, 11:30 am

Guys, can any of the 1jz guys share some advice
I recently installed a Japanese foreign used 1 jz non-turbo vvti in my rx70 Cressida

I need some advice on the suspension, the car dancing all over the place, the suspension naturally weak. any suggestions?
also, the transmission did not come with a speedo sensor, this engine was getting that signal from the ABS which the Rx 70 don't have. any advice will be appreciated. I want to get a sppedo meter working and a tachometer

User avatar
3NE 2NR for life
Posts: 123
Joined: January 9th, 2008, 8:56 am
Location: East-West

Re: rx 70 1jz

Postby psycostud666 » May 23rd, 2018, 10:46 pm

Basically, Cressida and Mark II are the same chassis, if you lucky to get springs and shocks from a foreign Mark II that came with a 6 Cylinder, it should hold good.

There is a Head Up Display unit being sold on Ebay which shows Tac and Speedo, it Jack's into the diagnostic port, but you have to know if it's OBD I or II.

User avatar
punchin NOS
Posts: 3198
Joined: May 6th, 2006, 2:39 am
Location: Couva

Re: rx 70 1jz

Postby Zeriam » June 16th, 2018, 11:03 am

You can either go with coilovers for the 70 or put s13 stuff but would ruin the ride. Stiffer bushings in the back would help the wiggling

Riding on 13's
Posts: 7
Joined: April 9th, 2018, 1:52 pm

Re: rx 70 1jz

Postby RX70MAN » June 29th, 2018, 9:07 pm

Hi I have foreign toyota Mark 11 grande shell which has independent suspension and shocks and also the entire differential and rack and pinion for sale. THAT will solve your problems as it did mine


Return to “TOYOTA”

Who is online

Users browsing this forum: No registered users and 3 guests