TriniTuner.com  |  Latest Event:  

Forums

CY lancer (08 lancer)

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

User avatar
Dave
3NE 2NR Moderator
Posts: 14263
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: CY lancer (08 lancer)

Postby Dave » March 13th, 2018, 8:24 am

Pulley may have a bend or the bearing on which it rotates is starting to wobble

Advertisement
User avatar
mety57
Chronic TriniTuner
Posts: 635
Joined: January 30th, 2007, 11:43 pm
Location: arouca
Contact:

Re: CY lancer (08 lancer)

Postby mety57 » March 14th, 2018, 8:45 pm

thanks dave i'll do some more inspecting

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 584
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » March 18th, 2018, 7:29 pm

kriticalkase wrote:Not sure about the CS but the CY 1.6 use sp111
.
How much quarts of oil does the tranny take? Do I have to vacuum the oil out or does it have a drain cork?

kriticalkase
Sweet on this forum
Posts: 287
Joined: July 11th, 2007, 2:35 am

Re: CY lancer (08 lancer)

Postby kriticalkase » March 18th, 2018, 7:35 pm

There is a drain cork. At DM they did a simple drain and refill. Took approx 5quarts.

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 584
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » March 24th, 2018, 7:14 am

When cleaning the e throttle, do I have to reset it using a OBD? For the Cy 1.6

henry_j
Riding on 13's
Posts: 3
Joined: March 26th, 2018, 6:22 am

Re: CY lancer (08 lancer)

Postby henry_j » March 29th, 2018, 12:23 am

Wow... This is great....!!!

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 584
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » April 6th, 2018, 10:40 am

Cleaned the throttle body using bars and a cloth to wipe... Didn't spray the bars inside the tb and the idle raises to 1500 an drops when the ac comes on... Any help? :(

User avatar
mety57
Chronic TriniTuner
Posts: 635
Joined: January 30th, 2007, 11:43 pm
Location: arouca
Contact:

Re: CY lancer (08 lancer)

Postby mety57 » April 8th, 2018, 7:08 pm

try removing the battery

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 584
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » April 8th, 2018, 8:31 pm

Working good after a few long drives

User avatar
mety57
Chronic TriniTuner
Posts: 635
Joined: January 30th, 2007, 11:43 pm
Location: arouca
Contact:

Re: CY lancer (08 lancer)

Postby mety57 » April 8th, 2018, 9:22 pm

ok coool

anthonyanthony
Chronic TriniTuner
Posts: 551
Joined: September 30th, 2007, 4:03 pm

CY AC ISSUES

Postby anthonyanthony » April 10th, 2018, 7:13 pm

Lately I am getting this problem.
When the outside temp is above 32 degrees C, the ac cooling shuts off ie the compressor shuts off and the engine cooling fan switches over to low speed.
Sometimes the ac LED on knob flashes but most times it remains on once ac is switched on.
But when the outside temp falls below 32 , the ac functions , ie blows ice cold air (compressor starts back and engine fan switches over to high speed)
I replaced the cabin filter and wash out the condenser at front of car but the problem still occurs at times.
Anyone experience this with their car and what was done. CY is now 8 yrs old.
One house ac man check it and said the gas level is ok.. he suggested the problem could be a high pressure issue , ie pressure switch is sensing a high pressure or the drier may be clogged and need replacing.

User avatar
mety57
Chronic TriniTuner
Posts: 635
Joined: January 30th, 2007, 11:43 pm
Location: arouca
Contact:

Re: CY lancer (08 lancer)

Postby mety57 » April 10th, 2018, 10:20 pm

system may have a choke or low gas level but the compressor is overheating ........I know a guy with a Toyota axio and the ac does the same thing

anthonyanthony
Chronic TriniTuner
Posts: 551
Joined: September 30th, 2007, 4:03 pm

Re: CY lancer (08 lancer)

Postby anthonyanthony » April 25th, 2018, 6:35 pm

OK , I checked out a place in bamboo, right by grand bazzar.
He told me it is giving a high pressure reading and said the drier and expansion valve will have to be replaced.
He said he did a few vehicles like mine and every thing labour and material will be $1400.00.

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 584
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » April 29th, 2018, 3:09 pm

Anyone know where I can get brake caliper pins to buy?

anthonyanthony
Chronic TriniTuner
Posts: 551
Joined: September 30th, 2007, 4:03 pm

Re: CY lancer (08 lancer)

Postby anthonyanthony » May 2nd, 2018, 6:41 pm

All right , I got the issue with my a/c sorted out .
The drier was replaced , cabin filter changed and system gassed up .
Total cost was $1400 and now it is blowing super cold at 25.

User avatar
mety57
Chronic TriniTuner
Posts: 635
Joined: January 30th, 2007, 11:43 pm
Location: arouca
Contact:

Re: CY lancer (08 lancer)

Postby mety57 » May 2nd, 2018, 10:07 pm

nice to hear man

kavaninho
Trinituner Peong
Posts: 456
Joined: March 29th, 2008, 8:30 pm
Location: Gasparillo
Contact:

Re: CY lancer (08 lancer)

Postby kavaninho » May 6th, 2018, 6:23 pm

Guys my shocks are on the way out and I'm considering coilovers to replace them, can you guys share your experiences here with the different brands. I'm not looking to brake the bank as well..lol

User avatar
Big Z
18 pounds of Boost
Posts: 2413
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Kendall, Luberfiner, Redline, Royal Purple, Valvoline, Fuel Injector Cleaning
Contact:

Re: CY lancer (08 lancer)

Postby Big Z » May 6th, 2018, 7:38 pm

Gecko is failure, in terms of ride quality and durability.
I suggest Yellow Speed for a budget coilover. DRL Performance is the local agent.

kavaninho
Trinituner Peong
Posts: 456
Joined: March 29th, 2008, 8:30 pm
Location: Gasparillo
Contact:

Re: CY lancer (08 lancer)

Postby kavaninho » May 7th, 2018, 6:31 pm

Big Z wrote:Gecko is failure, in terms of ride quality and durability.
I suggest Yellow Speed for a budget coilover. DRL Performance is the local agent.

I'll look at it thanks. I'm also seeing other brands like godspeed, truhart and J2. Anyone has any experience with those?

User avatar
Rush
3NE 2NR for life
Posts: 145
Joined: October 15th, 2006, 12:12 am
Location: pos

Re: CY lancer (08 lancer)

Postby Rush » May 7th, 2018, 10:52 pm

Folks, after a 8 year hiatus or so, I think I'll be re-joining the lancer family.

Had a CK4, then CS and am now looking at getting the CY from DM.

Currently priced at 185. Their 7 year plan seems attractive if you out 40% down. From my calculations, it may be cheaper to go this route considering ur getting fully comp insurance.

Not the route I'm going...but thought it would be good to share.

Hoping that the lancer treats my family and I well, since I plan on treating it well.

User avatar
Albezel21
Street 2NR
Posts: 88
Joined: August 26th, 2011, 10:46 pm
Location: POS
Contact:

Re: CY lancer (08 lancer)

Postby Albezel21 » May 8th, 2018, 8:10 am

Jade_Inc. wrote:Anyone know where I can get brake caliper pins to buy?
Online. New & OEM. I saw some recently while looking for something else.

User avatar
Albezel21
Street 2NR
Posts: 88
Joined: August 26th, 2011, 10:46 pm
Location: POS
Contact:

Re: CY lancer (08 lancer)

Postby Albezel21 » May 8th, 2018, 8:50 am

Would any of you guys be interested in purchasing replacement OEM antennas? We all know they simply start to become brittle after approx 6 years.

NappyheadRR
Riding on 13's
Posts: 11
Joined: January 2nd, 2016, 10:16 am

Re: CY lancer (08 lancer)

Postby NappyheadRR » May 8th, 2018, 8:52 am

Albezel21 wrote:Would any of you guys be interested in purchasing replacement OEM antennas? We all know they simply start to become brittle after approx 6 years.
Once the price is right. I need one lol

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 584
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » May 8th, 2018, 10:02 pm

Albezel21 wrote:
Jade_Inc. wrote:Anyone know where I can get brake caliper pins to buy?
Online. New & OEM. I saw some recently while looking for something else.
I saw a few but I don't know which One exactly to buy... They have different part numbers

User avatar
Albezel21
Street 2NR
Posts: 88
Joined: August 26th, 2011, 10:46 pm
Location: POS
Contact:

Re: CY lancer (08 lancer)

Postby Albezel21 » May 8th, 2018, 10:19 pm

Jade_Inc. wrote:
Albezel21 wrote:
Jade_Inc. wrote:Anyone know where I can get brake caliper pins to buy?
Online. New & OEM. I saw some recently while looking for something else.
I saw a few but I don't know which One exactly to buy... They have different part numbers
Most times is just an upgraded number. Is ur lancer a 1500 or 1600?

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 584
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » May 9th, 2018, 6:22 am

Albezel21 wrote:
Jade_Inc. wrote:
Albezel21 wrote:
Jade_Inc. wrote:Anyone know where I can get brake caliper pins to buy?
Online. New & OEM. I saw some recently while looking for something else.
I saw a few but I don't know which One exactly to buy... They have different part numbers
Most times is just an upgraded number. Is ur lancer a 1500 or 1600?
My one is 1600cc

Sent from my A0001 using Tapatalk

User avatar
Albezel21
Street 2NR
Posts: 88
Joined: August 26th, 2011, 10:46 pm
Location: POS
Contact:

Re: CY lancer (08 lancer)

Postby Albezel21 » May 9th, 2018, 7:33 am

Jade_Inc. wrote:
Albezel21 wrote:
Jade_Inc. wrote:
Albezel21 wrote:
Jade_Inc. wrote:Anyone know where I can get brake caliper pins to buy?
Online. New & OEM. I saw some recently while looking for something else.
I saw a few but I don't know which One exactly to buy... They have different part numbers
Most times is just an upgraded number. Is ur lancer a 1500 or 1600?
My one is 1600cc

Sent from my A0001 using Tapatalk
Top Pin MR475896
Top Pin Bushes MB69924
Bottom Pin 4605A101

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 584
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » May 9th, 2018, 7:43 am

Nice, thanks bro

User avatar
Dave
3NE 2NR Moderator
Posts: 14263
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: CY lancer (08 lancer)

Postby Dave » May 9th, 2018, 8:30 am

Buying a pin may not necessarily be the fix if the caliper itself is worn. The caliper may need a bushing in it.

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 584
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » May 9th, 2018, 9:19 am

Dave wrote:Buying a pin may not necessarily be the fix if the caliper itself is worn. The caliper may need a bushing in it.
Tbh I used some strips of plastic bottle and put it in the caliper and the noise eased up a bit... I wud try using a strip of aluminum.

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 3 guests