TriniTuner.com  |  Latest Event:  

Forums

THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

BoostJunkieXL
Sweet on this forum
Posts: 336
Joined: August 31st, 2008, 9:39 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby BoostJunkieXL » November 24th, 2017, 2:41 pm

figleaf wrote:good day tuners. Anyone knows if Evo 7/8 steering racks can be used on CS2A lancers?


Yes but your turning radius will change not to mention the offset of your front wheels and you'll probably have to use an evo steering column with steering (not sure about that part)

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » December 2nd, 2017, 8:34 pm

thanks... much appreciated.

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » December 2nd, 2017, 9:03 pm

Associates of the forum...Apparently locating a wiring diagram for a CS5W Ralliart is like trying to find a unicorn in a pair of Red October Yeezy 2s surfing a whale in the milky way. Sigh...That being said... any connects to get me this???? OR and i am quite humble with the OR... where to wire in the brake booster vacuum sensor? (seen on the image upload)
Image

any assistance will be most appreciated.

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11399
Joined: March 30th, 2010, 8:58 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby Ted_v2 » December 3rd, 2017, 6:03 am

Evo have less lock than a Lancer.

BoostJunkieXL
Sweet on this forum
Posts: 336
Joined: August 31st, 2008, 9:39 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby BoostJunkieXL » April 17th, 2018, 9:04 am

figleaf wrote:Associates of the forum...Apparently locating a wiring diagram for a CS5W Ralliart is like trying to find a unicorn in a pair of Red October Yeezy 2s surfing a whale in the milky way. Sigh...That being said... any connects to get me this???? OR and i am quite humble with the OR... where to wire in the brake booster vacuum sensor? (seen on the image upload)
Image

any assistance will be most appreciated.



i have one :/ but im using it lol. really though you dont need it.. i ran mine for two years no issues whatsoever just the damn cel. also whatsapp me i have the wiring diagram...searched months for it 7062023. its somewhere on my pc tho

User avatar
Parvin
I LUV THIS PLACE
Posts: 1096
Joined: September 20th, 2006, 12:42 am

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby Parvin » May 30th, 2018, 9:24 pm

Anyone ever had the same issue?

I did an under wash (wash and shock oil) yesterday and when driving today I’m getting a ‘click’ noise from the front left wheel. And then later on started hearing a ‘rattling’ sound from the front wheels when going over rough patches (8/10 times it might be heard) ...

Also, I’m getting a knocking sound coming from the rear, when driving over rough patches it’s quiet, but it happens almost constantly on smooth surfaces and then stops.

Everything was normal before I got it washed though.

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » July 6th, 2018, 1:53 pm

BoostJunkieXL wrote:
figleaf wrote:Associates of the forum...Apparently locating a wiring diagram for a CS5W Ralliart is like trying to find a unicorn in a pair of Red October Yeezy 2s surfing a whale in the milky way. Sigh...That being said... any connects to get me this???? OR and i am quite humble with the OR... where to wire in the brake booster vacuum sensor? (seen on the image upload)
Image

any assistance will be most appreciated.



i have one :/ but im using it lol. really though you dont need it.. i ran mine for two years no issues whatsoever just the damn cel. also whatsapp me i have the wiring diagram...searched months for it 7062023. its somewhere on my pc tho



Boostjunkiexl i tried your number but nothing. can you message me the diagram via whatsapp plz at 320-2433

User avatar
KM_2NR
3NE2NR is my LIFE
Posts: 887
Joined: September 20th, 2009, 4:43 pm
Location: Headbanging in traffic

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby KM_2NR » August 8th, 2018, 3:24 pm

Random but will a 4g93 a.c compressor work on a 4g92 engine (CK4 Lancer) ?

User avatar
Parvin
I LUV THIS PLACE
Posts: 1096
Joined: September 20th, 2006, 12:42 am

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby Parvin » November 25th, 2018, 10:07 pm

Would anyone have the part # for the faster bolts on the evo 4 rear bumper?

The flat top ones that secure the lip to the bumper.

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » March 23rd, 2020, 10:14 pm

Good day folks. I need some advice. What stiffer springs will work on the CS2a shock absorbers?

tunerboss1
Street 2NR
Posts: 41
Joined: January 21st, 2015, 1:01 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby tunerboss1 » March 25th, 2020, 1:49 pm

Lf tranny conversion or a gearbox for my 4d56 engine for my Pajero

wildeapache1
Ricer
Posts: 18
Joined: April 10th, 2007, 6:43 pm
Contact:

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby wildeapache1 » April 19th, 2022, 1:19 pm

Hello everyone. I'm looking for an Idle Air Control Valve for the 4G92 engine in a CK4 lancer. Any recommendations?

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 9 guests