CY lancer (08 lancer)

[NR8]

Both Whiteline and SuperPro have those bushings for your car. Check their websites, I just did. If your car is equipped with the 4B11 engine select the 117kW option.

[dredman1]

^^^ Saw the Whiteline - will check out the SuperPro as well. Thanks.

[agent007]

Call DM today and got these prices for the CY Lancer:

$408.25 + VAT cabin air filter
$670 + VAT engine air filter
$1200 + VAT 4 spark plugs
$100 + VAT oil filter
$402.50 + VAT gallon of ATF
$1530 + VAT front brake pads
$770 + VAT rear brake shoes

[Albezel21]

i Know....madness right smh

[Morpheus]

LoL. Slowly killing Mitsu.....

[A.W.O.L]

Hmmm...
The only thing on the list cheap is the list is tranny oil providing thats the cvt oil listed

[src1983]

Thanks. I guess that means the smaller bushing is available to purchase separately (OEM Mitsubishi brand)?

I haven't found anywhere online yet that sells it though (only found the large ones so far).

Will give McEnearny parts dept a call to see if they sell it, although the couple times I called for info they never willing to give any unless I give them my vehicle number, which they won't have as it's RORO.

I got parts for my FU recently, try south

[BrotherHood]

Call DM today and got these prices for the CY Lancer:

$408.25 + VAT cabin air filter
$670 + VAT engine air filter
$1200 + VAT 4 spark plugs
$100 + VAT oil filter
$402.50 + VAT gallon of ATF
$1530 + VAT front brake pads
$770 + VAT rear brake shoes

All I can do is laugh.
I will keep my CS yes.

[dredman1]

Call DM today and got these prices for the CY Lancer:

$408.25 + VAT cabin air filter
$670 + VAT engine air filter
$1200 + VAT 4 spark plugs
$100 + VAT oil filter
$402.50 + VAT gallon of ATF
$1530 + VAT front brake pads
$770 + VAT rear brake shoes

Hmmm...
The only thing on the list cheap is the list is tranny oil providing thats the cvt oil listed

What AWOL said. Thats a damn good price if its the Diaqueen CVT fluid.
Somehow I doubt it is though - prob normal transmission fluid.

[G.I]

viewtopic.php?t=603810

If anyone interested...I need to sell ASAP!!

[abbow]

Anyone selling their 18" Rims from the GT / GTS?

Looking for a set to buy. 731-6320

[genghis]

hey guys, anyone have 17" rims on they CY?
what is the biggest size tire? 215/55/17??

[d_ad_man]

looking for a pair of axels for my cy lancer 4b11 or 2.0 engine ASAP.

[anthonyanthony]

genghis,

I using 17" s with 225/50 tyres

[genghis]

^^ any rubbing in the front?

[anthonyanthony]

no rubbing up front even at full lock.
The tyres are nexxen's.
The first set of nexxens the tyes used to rub slightly when the back was fully loaded I the car entera depression while driving.
The next set of nexxens installed , although marked 225/50 is slightly smaller asscompared to the first.
Installed on rear and no rubbing.

[dredman1]

Hey guys, some help please. My question is highlighted in red below (not a good way to end the year I know). But first some background:

From pg. 51 of this thread

update guys........sho blight apparantly pass by me. my car is practically sold but still on my hands. as you all know, last mth, DM changed the front right ABS sensor. ABS light and check engine light was on. i got it changed under warranty. on saturday, the light came on again. this time the front left sensor is gone. WTF!!! going in tomorrow to get it replaced. but i think they are out of stock.

TeamLoco how you know which sensor , do you have a scan tool?

I know its the front left because at a standstill I am getting a sort of clicking sound from there. The abs is coming in on the front left wheel alone but it causes the pump to run intermitantly

So I got the "ABS Service Required" warning on my info display when I started the car to leave the office today A short time after while slowly driving home, the Check Engine Light came on In my mind I was like WTF is happening???

I immediately pulled over and scanned the error with my ScanGauge which showed code P1773, which means the CVT computer has detected an abnormality in the ABS computer - basically an ABS fault that will affect operation outside of the ABS system.

Read more here: http://www.justanswer.com/mitsubishi/47 ... z3NVWqceSD

So anyway, from that link above and the experience of Team Loco and others here in this thread, I gather the problem is a faulty ABS sensor, for which my angus is not peppered for Diamond Motors' prices.

Now I'm able to locate the original sensors online at much better prices, and I'm fairly confident I can change these out myself. However, my issue is how can I scan/check to see which sensor is faulty (the FL, FR, or one of the rears) if there's no noise from the ABS pump as Team Loco heard with his car?

Seeing as the FL and FR are different part numbers, and the rears also have their own unique part numbers, I need to know which one to buy (since they range from US$185 - $230)

[A.W.O.L]

Wayzzz...I thought the tool would say cuz I hav the same ting..
I paid a $150 to scan the car the last time that happen and did the change myself
Make sure the new 1 is the revised part cuz the new 1 is upgraded...

[dredman1]

Where did you get the scan done at that price AWOL? And please don't say DM, because my car is a RORO - I don't think they will take nicely to doing that for me.

You have a ScanGauge as well? If you do, they only read and reset CEL error codes - it can't read the ABS system.

The part nos. I'm seeing online for the fronts are (left/right) 4670A575/6 , and 4670A579/80 for the rear left/right. I hope those are the upgraded ones - they're the only ones that shows up for the car on www.mitsubishipartswarehouse.com

Going to crawl under the car later to take a look and see if by chance one of the sensors came loose or if anything may need cleaning as the first steps, until I can confirm if a sensor is in fact faulty (and also which one).

[A.W.O.L]

Friend at automotive components in O'mera arima...well massy now
I have a obd2 bluetooth scan tool with Torque android app
Cant remember the the part number bcuz gerard from teknet brought it in for me and he highlighted the upgrade mitsu made..

[dredman1]

Thanks - any contact info for the guy, or just call ACL/Massy?

I'll call round some other shops before as well to see if it can be done elsewhere. Arima kind far for me, so that will be the last resort.

If anyone knows anywhere else offhand that could do the ABS scan closer to Central or Barataria let me know please...

[ZeroOne]

CY's manufactured in what period are affected by this ABS problem?

[dredman1]

Happy New Year fellow CY owners!!!

@ZeroOne - From what I've been reading, the 2008 model seems to be most susceptible to it. That's not to say the other model years aren't, but it seems most prevalent with that year.

[Bago boi]

Happy new year ladies and gentlemen. As we're on the topic of brakes, anyone know where i can get two brand new front rotors for my Galant fortis (2008 CY4A)

[dredman1]

Not sure of anywhere locally besides Diamond Motors, and even then you might have to wait for them to get it in stock.

I brought mine in, purchased from Tirerack. Earlier in the thread someone else mentioned they brought theirs through Teknet (user W2J) on the forums.

I guess you could call around at some of the more popular parts places locally and see if they have or could direct you to where may have.

[Dave]

You can get very simple for under 600 or get real fancy for 1500

[SilverWolf]

Hi guys, I'm contemplating getting the CY Lancer from Ansa and I'd like to know if maybe you can clarify some stuff for me.

I wanna go with the basic model which is $155K. I wanted some additional accessories which are:

- Alarm ($1500)
- Tint ($500)
- Fog Lamps ($2000)
- Flare Kit ($9500)
- Spoiler ($5000)
- Reverse Sensors ($2000)

With the additional accessories, I'd be paying $20K extra. What I wanted to know is, would it be cheaper to go with after market spoiler/flare kit/reverse sensors(maybe a reverse camera instead?) and is there anywhere over here where I'd be able to source these?

I don't mind paying for the alarm, tint and fogs but the others seem a bit steep to me.

[trvs]

You could probably get a FULL body kit for less than the what you was quoted there painted and installed.

See here for body kits:
http://www.andysautosport.com/body_kits ... /2014.html
http://www.bodykits.com/Mitsubishi/Lanc ... Body-Kits/
http://roadracemotorsports.com/store/in ... =1_123_125
http://www.body-kit.com/model_mit_lancer08bodykits.html

Alarm
Not needed, money will be better spent with Car Search or a decent GPS provider. If you want and alarm, go with a decent Viper with Remote start... DM usually installs a basic clifford alarm.

Tint
Get Llumar Window Film. It should cost around $450.00 installed. Don't take the crap tint from DM.

Fog Lamps
You can get this for around $600.00 (aftermarket) not sure about installation. (Check Bhola's Auto Body)

Reverse Sensors/Camera
You could get reverse sensors cheaper, as for the camera you could go with the OEM Part# MZ380462EX or aftermarket. You would also need to buy a decent double din head unit for the camera.

Or... just save all your money lol.

[SilverWolf]

Figured they were way overpriced! Just trying to milk people...

Thanks a lot though...Really appreciate it!

BTW: Another question, which would you choose for features, driving experience and re-sale; Lancer, Yaris or Corolla? Haven't gotten a chance to check out Toyota as yet but those vehicles are about the price range I'm looking at. Bear in mind that I'm a tall guy (6'4") so space is also an important factor.

[Albezel21]

Not sure bout the new corolla with leg and headroom but it's predecessor didnt have nowhere near enough room and got crossed off my mental list. I have a CY lancer. I'm 6'-6" and i don't need to drive with the seat all the way back.
One thing to note almost all cars that have a regular sunroof have about an inch or so less headroom in order to house the sunroof mechanics