CY lancer (08 lancer)

[metalgear2095]

You want a bigger spoiler than THAT?!

[A.W.O.L]

Please send me a PM etc if anyone knows kk thanks 2nrs Best Regards!

Is no secret once u post a price men will compare it to prices on ebay an other sites cuz i just check an u could get it oem for low as $70US an thats just the 1st page..
And plz dont put a bigger spoiler the an OEM evo X spoiler..anyting else would look off IMHO..

[anthonyanthony]

DM itself would not purchase the sproiler back, but some of the employees or salesmen in there may be willing to purchase it from you.
You can have a casual chat with them when you carry your vehicle for service, chat with the small men , not the big men or bosses since the bosses do not encourage this .

Once my warranty is over one of the techs is planning to purchase my OEM rims and tyres.
In POS you could check out one of the salesperson by the name of curtis young , he may be intrested or know somone who is.

On amazon such rear sproiler is being sold new for approx $ 130.00 US which my work out to be approx $ 2000.00 TT ( this includes shipping , customs fees etc.) .
I dont think anyone will be willing to come to this figure so you may have to go below this or if you get this figure or more then consider yourself lucky.

[vnb7]

Thanks guys... I not goin to large lol so dsi... I rather the OEM Evo X spoiler than the normal one find its to flat on the top...
And off course I will not call more than $1000 the reason I said PM me the price was I didnt want to get boot out the Page for speaking of prices etc... Dont really know if they wud consider it a sale etc...
But thanks for the help will casually speak to the Guys at DM when I carry it in for a service =)

Take care guys! Have fun at the CY meeting lol wont come this time doing sum mods... Hopefully next time =)

[anthonyanthony]

vnb7, what lancer is this the 2.0, 1.6 or 1.5L?

[Team Loco]

i have an airbag for the 2011 lancer, passenger side, if you all know anyone interested

[anthonyanthony]

Hey AWOL, don't know if you can remember this but on the CS forum somone ( a long time ago can't remember who ) installed a cooler on their cs3 and ran their car showing shots of the temp gauge before and after.

The shots showed with the cooler installed the coolant temp was much lower after a 'hard run' .... gauge was at quarter mark as compared to above half ( without cooler).

Have you noticed this with the cooler installed in the cy?

[vnb7]

@ anthonyanthony its the 1.5L < yup the eco friendly 1 lol

[anthonyanthony]

VNB7, I was told they dont have the 1.5 available anymore , they have the slightly more powerfull 1.6 or cy1 .
If you look under the bonnet the 1.6 has the reserviour for the power steering fulid ie it has a hydraulic power steering whereas the 1.5 has an electric power steering hence no reserviour.
Confirm this.

Once I get time I will post some pics of mine , in the mean time you can scroll thru this forum to see the various mods I did so far.

[vnb7]

ok np i will check it... its a 2008 model tho so i think it cud be the 1.5...

[JUS4SHO]

Just changed the cabin air filter. Car is 4 years old, 61000km and only highway driving. I can't believe it.

[JUS4SHO]

Just finished install the oem front mudguards for the lancers with side air dams. And how she looks with the black grill

[Nebulous_14]

Hey Jus4sho if you have the REAR installed did you drill a hole into the bumper to secure the clip that came with it but it appears secured. There were three clips but I only installed 2. I am seeing two for the front but what about the underneath does it have a hole for a clip to attach to the flares.
Thanks

[anthonyanthony]

hey sho , car looking good.
is this the gun metal gray?
with this colour have you considered darkning / tinting the headlights and fogs?
saw one with some 18" hyper silver ( I think) and looked good when car is clean but ugly when car is dirty ?
The test car I drove was this colour , it was very dirty so this was what turned me off from this colour.

Where did you purchase the mudguard and ac filter ?
Cant remember seeing any but does the cs3 come with such a filter and if not can one be installed?

[JUS4SHO]

Hey Jus4sho if you have the REAR installed did you drill a hole into the bumper to secure the clip that came with it but it appears secured. There were three clips but I only installed 2. I am seeing two for the front but what about the underneath does it have a hole for a clip to attach to the flares.
Thanks

yup had a drill a small hole for the rear. If its the oem the mounting instructions came with a template.

[JUS4SHO]

hey sho , car looking good.
is this the gun metal gray?
with this colour have you considered darkning / tinting the headlights and fogs?
saw one with some 18" hyper silver ( I think) and looked good when car is clean but ugly when car is dirty ?
The test car I drove was this colour , it was very dirty so this was what turned me off from this colour.

Where did you purchase the mudguard and ac filter ?
Cant remember seeing any but does the cs3 come with such a filter and if not can one be installed?

yes the cs3 has a filter, I get the items from a contact in Japan.
No on the darken of the fogs and headlights.

[fras]

JUS4SHO post a side shot of the car... Wanna see how mud guards look from the side

[Morpheus]

Is the mudguard guarding any mud? I think it looks rather tiny and may just be for looks. I could be wrong. Looks good either way.

[Nebulous_14]

I have the rear installed should have do it 4 years ago as everyone is mixing cement in the road by me.
I will have to buy a pair for the front to cover the tiny teeth marks my dogs made.
I agree they are very small mudguards but the front would have to be even smaller otherwise it may look funny on the car.
It looks good on Jus4Sho car and the blacked out grille looks good too.

[JUS4SHO]

I no longer have the strip off dirt comming up the side so yes it works.

[Morpheus]

I no longer have the strip off dirt comming up the side so yes it works.

^^Ok nice to hear. Agree the black grill looks good.

BTW PBN 983 looks like real Bawlz now

[JUS4SHO]

Yeah the car got raped parts on different cars now

[anthonyanthony]

http://diylancerex.blogspot.com/

Hey people check this site out and tell me what you think

[A.W.O.L]

<a class="vglnk" title="Link added by VigLink" target="_blank" rel="nofollow" href="http://diylancerex.blogspot.com/">http://diylancerex.blogspot.com/</a>

Hey people check this site out and tell me what you think

Lil too much work when could just change the bulb itself..
With 1 of these I.P bulbs
http://www.superbrightleds.com/cgi-bin/ ... wedge.html

[JUS4SHO]

Anyone interested in aquiring. Tein basic coilovers for the 08+ lancer cost is $830 us shipped to skybox. Just hit me a pm we can share the shipping to Trinidad.

[JUS4SHO]

Ultra racing bar installed

[JUS4SHO]

It is amazing the results achieved with a proper bar.

[G.I]

I have the stock rear exhaust section (CY4A 4B11) sitting around at home if anyone is interested, call a price. Or if you know someone who has been hit from the back and needs a replacement.

The GReddy not for sale

[JUS4SHO]

U really have to pass by me. Lol. I bought the greddy RS.

[G.I]

Mine is the Racing Ti-C. Greddy stopped making them and I got the second to last one that was available at Greddy HQ.