TriniTuner.com  |  Latest Event:  

Forums

CY lancer (08 lancer)

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

User avatar
ProtonPowder
I LUV THIS PLACE
Posts: 984
Joined: April 2nd, 2018, 1:15 pm

Re: CY lancer (08 lancer)

Postby ProtonPowder » January 16th, 2019, 5:23 pm

Any oil recommendations for the 2013 1.6L 4A92?

I saw a person earlier in the thread saying 10w30 and the manual saying 0w20
Also looking for brand recommendations
Attachments
Screenshot (11782).png
Screenshot (11782).png (29.76 KiB) Viewed 3665 times

Advertisement
anthonyanthony
Chronic TriniTuner
Posts: 560
Joined: September 30th, 2007, 4:03 pm

Re: CY lancer (08 lancer)

Postby anthonyanthony » January 16th, 2019, 5:37 pm

well today I had the cy2 serviced after 162K.
Replaced plugs (first time in 9 yrs ) and air filter with the original bosch which was bought from sookai diesel in chagunas, service the injectors and throttle body. Parts came up to around $400.00 ie plugs and filter , and labor was $ 500.00.
The mechanic told me I should replace it at 100K or 5 yrs since it was difficult to remove.
Next in the coming month of may is oil and filter change, coolant and tranny fluid change.

Bmahabir
Riding on 13's
Posts: 2
Joined: July 22nd, 2014, 10:24 pm

Re: CY lancer (08 lancer)

Postby Bmahabir » January 18th, 2019, 7:02 pm

Anyone know what's the price of foreign used springs or anyone that would want to trade their original springs for tein springs?

star23
Street 2NR
Posts: 68
Joined: March 7th, 2009, 11:11 am

Re: CY lancer (08 lancer)

Postby star23 » January 25th, 2019, 11:14 am

Where can I get a full aluminium radiator for the cy locally?

dredman1
Riding on 18's
Posts: 1637
Joined: October 7th, 2005, 10:47 pm

Re: CY lancer (08 lancer)

Postby dredman1 » January 25th, 2019, 12:02 pm

star23 wrote:Where can I get a full aluminium radiator for the cy locally?

Teknet could order for you.

Pm user W2J on the forum.

star23
Street 2NR
Posts: 68
Joined: March 7th, 2009, 11:11 am

Re: CY lancer (08 lancer)

Postby star23 » January 25th, 2019, 12:44 pm

Thanks

kavaninho
Chronic TriniTuner
Posts: 603
Joined: March 29th, 2008, 8:30 pm
Location: Gasparillo
Contact:

Re: CY lancer (08 lancer)

Postby kavaninho » April 3rd, 2019, 8:17 pm

Guys, can anyone guide me to what is the oem transmission fluid for the 1.5EX models and where can find it to purchase. Thanks.

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 654
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » April 3rd, 2019, 8:23 pm

kavaninho wrote:Guys, can anyone guide me to what is the oem transmission fluid for the 1.5EX models and where can find it to purchase. Thanks.
On the dipstick has the oil to use.. Most likely it's Mitsubishi SPIII oil

User avatar
Xecutive
3NE 2NR for life
Posts: 179
Joined: August 21st, 2007, 3:52 pm
Location: Trinidad

Re: CY lancer (08 lancer)

Postby Xecutive » April 19th, 2019, 1:07 pm

rollingstock wrote:Where locally can a set of original mats be sourced?


Going to be selling my set very soon since I’ll be selling the gt. It’s in mint condition because I always had a set of transparent mats over them so they were never stepped on or got any dirt on them. It’s the ralliart mats specifically for right hand drive vehicles. Very hard and expensive to source....

Will try to post some pics when I get a chance.

User avatar
rollingstock
TriniTuner 24-7
Posts: 16690
Joined: June 29th, 2009, 8:21 am
Location: Ain't got no chill!

Re: CY lancer (08 lancer)

Postby rollingstock » April 19th, 2019, 8:51 pm

Pm me some pics and price.
I brought in a set but if your colour matches my interior better I may consider it.

User avatar
Xecutive
3NE 2NR for life
Posts: 179
Joined: August 21st, 2007, 3:52 pm
Location: Trinidad

Re: CY lancer (08 lancer)

Postby Xecutive » April 19th, 2019, 9:18 pm

No problem. Will try to take some pics tmr.

User avatar
rollingstock
TriniTuner 24-7
Posts: 16690
Joined: June 29th, 2009, 8:21 am
Location: Ain't got no chill!

Re: CY lancer (08 lancer)

Postby rollingstock » May 22nd, 2019, 6:44 pm

Anyone with a none working 3rd brake light on the trunk. It's a cold solder issue.
You have to remove the reflector with a sharp thin blade, cut off the tabs and re-solder.

DSC_0013.JPG


DSC_0015.JPG

User avatar
rollingstock
TriniTuner 24-7
Posts: 16690
Joined: June 29th, 2009, 8:21 am
Location: Ain't got no chill!

Re: CY lancer (08 lancer)

Postby rollingstock » June 5th, 2019, 3:05 pm

Anyone using 17's on theirs? What tyre size?
I'm thinking of using 225/50/17 on some evolution 7 rims. Most shops recommended 225/45/17 but the 50 series closer to stock diameter.

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 654
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » June 6th, 2019, 4:09 am

rollingstock wrote:Anyone using 17's on theirs? What tyre size?
I'm thinking of using 225/50/17 on some evolution 7 rims. Most shops recommended 225/45/17 but the 50 series closer to stock diameter.
I got 225/50/17 in the back and 225/45/17 in the front. Reason it's so is because the Tyre shop said the 50 series in front will touch when locking the steering. One of these days I'll switch the back and front and try it

User avatar
rollingstock
TriniTuner 24-7
Posts: 16690
Joined: June 29th, 2009, 8:21 am
Location: Ain't got no chill!

Re: CY lancer (08 lancer)

Postby rollingstock » June 6th, 2019, 3:20 pm

Let me know when you do.

anthonyanthony
Chronic TriniTuner
Posts: 560
Joined: September 30th, 2007, 4:03 pm

Re: CY lancer (08 lancer)

Postby anthonyanthony » June 9th, 2019, 7:56 pm

Being using 225/50/ 17 on some Tezzen rims for 9 years on my cy.
No issue with rubbing of tyres on full steering lock.

User avatar
rollingstock
TriniTuner 24-7
Posts: 16690
Joined: June 29th, 2009, 8:21 am
Location: Ain't got no chill!

Re: CY lancer (08 lancer)

Postby rollingstock » June 9th, 2019, 8:35 pm

I'll be using a set of stock evo 7 rims. What's the offset of the rims you have?

dredman1
Riding on 18's
Posts: 1637
Joined: October 7th, 2005, 10:47 pm

Re: CY lancer (08 lancer)

Postby dredman1 » August 16th, 2019, 1:18 pm

Guys
Would installing 18" wheels on a CY2A require a camber kit?
I know the CYs dont have adjustable camber, and was thinking that since the CY4A comes with 18s, installing 18s on a CY2A shouldn't require a kit.
Or is the suspension geometry different between the CY2A and CY4A?

Jameel-Ali
Riding on 13's
Posts: 3
Joined: April 12th, 2011, 3:44 pm

Re: CY lancer (08 lancer)

Postby Jameel-Ali » August 19th, 2019, 6:44 pm

Good day all. I saw this question asked in the forum before but i did not find an answer.

Can i replace my 4a91 head and block with a 4a92 . would i need to replace the EPS or harness
or can the head and block be swapped in and function fine ?

User avatar
Dave
3NE 2NR Moderator
Posts: 14868
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: CY lancer (08 lancer)

Postby Dave » August 19th, 2019, 8:47 pm

Technically should be as simple as that. Saw 4g9? interchange as well as 4g1? also.

User avatar
moses_boss12
Trinituner Peong
Posts: 437
Joined: June 5th, 2014, 4:08 pm
Location: The Beautiful Hills of.................... Hellshire!!

Re: CY lancer (08 lancer)

Postby moses_boss12 » September 16th, 2019, 8:17 am

Guys,

My lancer keys fell, both the main and spare and they cracked. Now they are both shaking and i dont think they would hold out much longer, this is my first experience with a key that is so "soft", the falls weren't that extreme.

Anyone had experience in getting it replace, do i have to go back to the dealer, or can i order an replacement body and just switch it out?

Thanks in advance.

User avatar
d.d.s.
Sweet on this forum
Posts: 265
Joined: May 30th, 2009, 1:13 pm

Re: CY lancer (08 lancer)

Postby d.d.s. » September 16th, 2019, 12:20 pm

If it's just the shell that's broken but otherwise it's working, then yes you can order it from online and swap the guts. You could probably order a silicone protective case cover one time.

User avatar
moses_boss12
Trinituner Peong
Posts: 437
Joined: June 5th, 2014, 4:08 pm
Location: The Beautiful Hills of.................... Hellshire!!

Re: CY lancer (08 lancer)

Postby moses_boss12 » September 16th, 2019, 5:38 pm

Yeah its just the shell, been doing some searches online and I am seeing some cases that come with a key, which i assume is a simple matter of getting it cut at Rudds etc.

How do i know whether the key would work etc., is there something that is specific to our region in relation to the blade, some of the comments mentioned that persons were unable to get the key cut hence my hesitation.

Let me show you guys the options that I am getting;

Link 1
https://www.ebay.com/itm/Keyless-Remote ... Sw6QpbOOQY

Link 2-
https://www.banggood.com/3-Button-Remot ... rehouse=CN

Link 3- As i trust Amazon the most, do you guys think this would work? like a aftermarket/retrofit solution
https://www.amazon.com/gp/product/B07CZ ... AEG1&psc=1


Most of the options come up as Outlander/Eclipse, so i am royally confused at this stage.

User avatar
mety57
Chronic TriniTuner
Posts: 642
Joined: January 30th, 2007, 11:43 pm
Location: arouca
Contact:

Re: CY lancer (08 lancer)

Postby mety57 » September 16th, 2019, 8:24 pm

hey can anyone say if the cs lancer velocity joint and the cy are the same

Browns Auto
Riding on 13's
Posts: 3
Joined: March 18th, 2018, 3:18 pm
Location: Princes Town
Contact:

Re: CY lancer (08 lancer)

Postby Browns Auto » September 17th, 2019, 12:40 pm

Jameel-Ali wrote:Good day all. I saw this question asked in the forum before but i did not find an answer.

Can i replace my 4a91 head and block with a 4a92 . would i need to replace the EPS or harness
or can the head and block be swapped in and function fine ?

You can use the the 4A92(1.6L)head and block in place of the 4A91(1.5L) and you don’t need to change anything else. But you cannot use a 4A91 in place of the 4A92. The 4A91 lacks a bracket for the power steering pump.

User avatar
d.d.s.
Sweet on this forum
Posts: 265
Joined: May 30th, 2009, 1:13 pm

Re: CY lancer (08 lancer)

Postby d.d.s. » September 19th, 2019, 5:26 pm

Not possible to just use back your original keys instead of cutting the blanks? It should be a simple swap of the key and guts to the new shell.

Lancer:
Key Fob Keyless Entry Smart Remote Shell Case & Pad fits Mitsubishi 2008-2016 Lancer / 2008-2017 Outlander, Set of 2 https://www.amazon.com/dp/B071YQHBHV/re ... GDbG80EBSS
moses_boss12 wrote:Yeah its just the shell, been doing some searches online and I am seeing some cases that come with a key, which i assume is a simple matter of getting it cut at Rudds etc.

How do i know whether the key would work etc., is there something that is specific to our region in relation to the blade, some of the comments mentioned that persons were unable to get the key cut hence my hesitation.

Let me show you guys the options that I am getting;

Link 1
https://www.ebay.com/itm/Keyless-Remote ... Sw6QpbOOQY

Link 2-
https://www.banggood.com/3-Button-Remot ... rehouse=CN

Link 3- As i trust Amazon the most, do you guys think this would work? like a aftermarket/retrofit solution
https://www.amazon.com/gp/product/B07CZ ... AEG1&psc=1


Most of the options come up as Outlander/Eclipse, so i am royally confused at this stage.

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 654
Joined: February 18th, 2010, 7:18 pm

Re: CY lancer (08 lancer)

Postby Jade_Inc. » September 27th, 2019, 7:12 pm

rollingstock wrote:Let me know when you do.
225/50/17 works perfect

User avatar
rollingstock
TriniTuner 24-7
Posts: 16690
Joined: June 29th, 2009, 8:21 am
Location: Ain't got no chill!

Re: CY lancer (08 lancer)

Postby rollingstock » September 28th, 2019, 1:12 pm

Jade_Inc. wrote:
rollingstock wrote:Let me know when you do.
225/50/17 works perfect


Nice now is to decide what colour to paint the rims.

User avatar
Sultan
Ricer
Posts: 16
Joined: August 27th, 2007, 12:21 am
Contact:

Re: CY lancer (08 lancer)

Postby Sultan » October 29th, 2019, 3:22 pm

Hello!!
Looking for a steering rack for the 2008 CY lancer. preferably new.

User avatar
Albezel21
Street 2NR
Posts: 90
Joined: August 26th, 2011, 10:46 pm
Location: POS
Contact:

Re: CY lancer (08 lancer)

Postby Albezel21 » November 2nd, 2019, 10:27 pm

Sultan wrote:Hello!!
Looking for a steering rack for the 2008 CY lancer. preferably new.


Send me a P.M.

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 2 guests