TriniTuner.com  |  Latest Event:  

Forums

CK lancers Part Numbers

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

Javedali
Ricer
Posts: 26
Joined: November 19th, 2008, 9:52 pm

Re: CK lancers Part Numbers

Postby Javedali » March 12th, 2017, 12:42 pm

What does a fuel pump blinking and service required mean on my 2007 local lancer mean

Advertisement
User avatar
Kronik
Riding on 18's
Posts: 1849
Joined: July 23rd, 2004, 9:37 pm
Location: Central
Contact:

Re: CK lancers Part Numbers

Postby Kronik » March 14th, 2017, 8:02 am

Morpheus wrote:
Kronik wrote:Who have ASA up and running, want the part number for the clock spring for the local CS3

Check MISHI...

End up installing it back and getting the number

Kerdel767
Riding on 13's
Posts: 1
Joined: May 8th, 2017, 6:13 am

Re: CK lancers Part Numbers

Postby Kerdel767 » May 8th, 2017, 6:15 am

Hi all
Looking for intake an exhaust valves for a ck2a lancer
4g15 DOHC
Impossible to get these kinda things in Dominica...

User avatar
Mercenary
Riding on 17's
Posts: 1532
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » June 27th, 2017, 2:06 pm

needed part numbers for oil pump and oil pump seal for Local Ck4 2000 4G92 Sohc. I changed oil pan, changed cam and crank seals and there is still an annoying oil leak. Upon inspection I deduce it leaking from the 'upper' oil pan. thanks for any assistance I get fellas.

Keon24
Riding on 13's
Posts: 3
Joined: December 30th, 2011, 12:16 pm

Re: CK lancers Part Numbers

Postby Keon24 » August 21st, 2017, 7:06 am

Kudos to the creators of this thread and all who contributed, really saved my skin trying to find parts.

I have a libero with a 4G15 engine, everything stock. Recently changed brakes and rotors but noticed it only had two of the shim plates and missing a few of the retaining clips. so anyone know where i can get shim kit wagner f130925 or the shims and clips in general?

User avatar
Morpheus
TriniTuner 24-7
Posts: 10228
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » August 25th, 2017, 11:21 am

Mercenary wrote:needed part numbers for oil pump and oil pump seal for Local Ck4 2000 4G92 Sohc. I changed oil pan, changed cam and crank seals and there is still an annoying oil leak. Upon inspection I deduce it leaking from the 'upper' oil pan. thanks for any assistance I get fellas.


As far as I know, both upper and lower oil pan use just gasket maker.

Capture.JPG

User avatar
Mercenary
Riding on 17's
Posts: 1532
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » August 25th, 2017, 1:07 pm

Thanks Morpheus...now to find a competent mechanic to handle that for me. the upper pan in mines does leak intermittently.... :shock: :x

User avatar
Morpheus
TriniTuner 24-7
Posts: 10228
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » August 27th, 2017, 9:27 pm

BTW those local crank seals (most likely the cams too) don't fit properly so they tend to leak. I changed mine twice and then ordered in an original and the difference in even installing it was tremendous.
Let's just say it didn't just slide in by hand like the local, non-original ones.

User avatar
Mercenary
Riding on 17's
Posts: 1532
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » August 27th, 2017, 10:11 pm

Morpheus wrote:BTW those local crank seals (most likely the cams too) don't fit properly so they tend to leak. I changed mine twice and then ordered in an original and the difference in even installing it was tremendous.
Let's just say it didn't just slide in by hand like the local, non-original ones.



Yeah learned my lesson twice with cheap seals (local) lol. I using the car as is until i can swap it for a 93 sohc.

User avatar
trent
Riding on 17's
Posts: 1408
Joined: May 27th, 2010, 1:18 pm

Re: CK lancers Part Numbers

Postby trent » October 25th, 2017, 2:11 pm

Morpheus wrote:BTW those local crank seals (most likely the cams too) don't fit properly so they tend to leak. I changed mine twice and then ordered in an original and the difference in even installing it was tremendous.
Let's just say it didn't just slide in by hand like the local, non-original ones.


What are the OEM part numbers for the CK 4G92 SOHC and 4G15 DOHC ?
Tks.

User avatar
Morpheus
TriniTuner 24-7
Posts: 10228
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » October 28th, 2017, 10:02 am

trent wrote:
Morpheus wrote:BTW those local crank seals (most likely the cams too) don't fit properly so they tend to leak. I changed mine twice and then ordered in an original and the difference in even installing it was tremendous.
Let's just say it didn't just slide in by hand like the local, non-original ones.


What are the OEM part numbers for the CK 4G92 SOHC and 4G15 DOHC ?
Tks.

I believe the 4G92 SOHC and DOHC (Mivec)are the same. Not sure about 4G15

Image

User avatar
trent
Riding on 17's
Posts: 1408
Joined: May 27th, 2010, 1:18 pm

Re: CK lancers Part Numbers

Postby trent » October 28th, 2017, 7:41 pm

Cool, tks!

User avatar
Ted_v2
TriniTuner 24-7
Posts: 10406
Joined: March 30th, 2010, 8:58 pm

Re: CK lancers Part Numbers

Postby Ted_v2 » October 28th, 2017, 9:18 pm

I'm interested in a timing belt, locally what's the best option?

User avatar
Mercenary
Riding on 17's
Posts: 1532
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » October 28th, 2017, 11:28 pm

Ted_v2 wrote:I'm interested in a timing belt, locally what's the best option?


Gates

User avatar
trent
Riding on 17's
Posts: 1408
Joined: May 27th, 2010, 1:18 pm

Re: CK lancers Part Numbers

Postby trent » January 5th, 2018, 7:53 am

I'm looking for the part number for this idle air control valve (IACV).
It's for the CK 4G92/93 SOHC
Tks.

2018_01_04_21.37.21-1_resized.jpg
2018_01_04_21.37.21-1_resized.jpg (16.81 KiB) Viewed 151 times
2018_01_04_21.37.16-1_resized.jpg
2018_01_04_21.37.16-1_resized.jpg (18.68 KiB) Viewed 151 times

Stylet
Riding on 13's
Posts: 1
Joined: January 18th, 2018, 12:50 pm

Re: CK lancers Part Numbers

Postby Stylet » January 18th, 2018, 12:54 pm

Looking for Part Number for 4G92 Mivec's (DOHC) Cam Position Sensor (the one at the right side of the head), mine needs replacement and its kinda hard searching it here in Indonesia if i dont have the part number, any help would be highly appreciated, thank you :)

User avatar
Morpheus
TriniTuner 24-7
Posts: 10228
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » Yesterday, 12:28 pm

4G92 Mivec Camshaft Position Sensor MD327107
Image

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 2 guests