Moderator: 3ne2nr Mods
storm22 wrote:But there are some feature with the deck that come with the car do they replace it on the other deck cause if there is a way to change the language I am very interested would really like to keep that on. And to the guy who bought the deck from us does it work?
azis wrote:UPDATE: purchased a brand new mmcs from the American region (N-03) with the install kit, everything went in jack for jack, no issues. now I have the mmcs in English with back up camera and Bluetooth and access to all the "dealer options".
xtech wrote:Mitsubishi OEM factory navigation system
NAVIGATION UNIT Part # MZ360141EX / MZ360151EX
NAVIGATION INSTALL KIT Part # MZ360180EX or MZ360192EX
This system is compatible with a rear back up camera.
This is also compatible with the Mitsubishi Lancer and lancer EvoX 2008 onwards as well as recent Mitsubishi Outlanders
Forgive my ignorance - what's the difference between the "Navigation Unit" and the "Navigation Install Kit"?azis wrote:xtech wrote:Mitsubishi OEM factory navigation system
NAVIGATION UNIT Part # MZ360141EX / MZ360151EX
NAVIGATION INSTALL KIT Part # MZ360180EX or MZ360192EX
This system is compatible with a rear back up camera.
This is also compatible with the Mitsubishi Lancer and lancer EvoX 2008 onwards as well as recent Mitsubishi Outlanders
Not sure if this is the same, but this is the part number I used for the MMCS. Same part number for the install kit as quoted above.
Mitsubishi Display unit: 8750A183
It was pricey since I purchased the Head unit brand new ($14,000TTD in hand) it was cheaper than what CARPL*S in San Fernando quoted ($35,000TTD) but there are used units selling on eBay. The key is to match the number on ur current MMCS eg: J-01 = N-01 (my MMCS was J-03 so I purchased a N-03 which is that part number I quoted)
dredman1 wrote:Forgive my ignorance - what's the difference between the "Navigation Unit" and the "Navigation Install Kit"?azis wrote:xtech wrote:Mitsubishi OEM factory navigation system
NAVIGATION UNIT Part # MZ360141EX / MZ360151EX
NAVIGATION INSTALL KIT Part # MZ360180EX or MZ360192EX
This system is compatible with a rear back up camera.
This is also compatible with the Mitsubishi Lancer and lancer EvoX 2008 onwards as well as recent Mitsubishi Outlanders
Not sure if this is the same, but this is the part number I used for the MMCS. Same part number for the install kit as quoted above.
Mitsubishi Display unit: 8750A183
It was pricey since I purchased the Head unit brand new ($14,000TTD in hand) it was cheaper than what CARPL*S in San Fernando quoted ($35,000TTD) but there are used units selling on eBay. The key is to match the number on ur current MMCS eg: J-01 = N-01 (my MMCS was J-03 so I purchased a N-03 which is that part number I quoted)
I'm just assuming the Navigation Unit is the whole unit that you would pull out from the centre console like what's in the pics.
Would I still need to get the Navigation Install Kit if I sourced a corresponding American unit (just the part in the pics below) to the Japanese unit in my car?
Mudboy wrote:Got mine converted to english in 10 minutes. Giz Tec has a representative in Trinidad and does it in south Trinidad.
Sherwin89 wrote:Mudboy wrote:Got mine converted to english in 10 minutes. Giz Tec has a representative in Trinidad and does it in south Trinidad.
Which part in south are they located and how much did it cost. I need to have mine converted also
Users browsing this forum: No registered users and 56 guests