Postby viper1 » September 24th, 2015, 1:42 pm
As title state does anybody have this scan tool locally and makes house calls?i'm located in trincity
Needed for an evo x fq 300 sst as g and yaw rate sensor has seemed to gone dead...pulled these DTCs using a launch x431 master:
c1210 straight g sensor input circuit Active
c2204 sensor cluster internal error Active
u1428 sensor cluster active(CAN message) Active
also live data stream shows g sensor reading -1.27 G(normal is supposed to read between -0.11 to +0.11 G) and AYC/ASC/ABS warning lights have come on and seem to be completely disabled
From the reading through the service manual these DTCs indicate g and yaw sensor needs to be changed(got the sensor last night) and upon replacing the scan tool must be used to for ASC-ECU to relearn the neutral point and unfortunately the launch scan tool doesn't have this feature
Has anyone else experienced this problem?any help would be much appreciated!
But right now just need to have the new one recalibrated using the mut 3 as soon as possible