TriniTuner.com  |  Latest Event:  

Forums

cs3 trnsmission

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

mark27
Street 2NR
Posts: 35
Joined: May 10th, 2016, 2:44 pm

cs3 trnsmission

Postby mark27 » December 3rd, 2016, 8:27 am

Good day tuners. I recently bought a local cs3 with a 4g18 and cvt transmission. The car was a first owner and was serviced at diamond motors. Bought the car at 100k km and the car needed a service. I changed the engine oil, plugs, air filter, trans oil, all belts, timing belt, tensioner and the water pump. The oils were genuine mitsubishi. The engine has very good compression and works excellent however it seems the car doesn't have much power. When you floor the car, it builds up very slow and it's horrible when climbing hills. The engine was timed properly as my buddy and i did the repairs. I don't kno if its supposed to work like that or not because i was used to cm5a tiptronic gsr previously.

User avatar
PapaC
Riding on 17's
Posts: 1422
Joined: December 13th, 2007, 12:25 pm

Re: cs3 trnsmission

Postby PapaC » December 3rd, 2016, 8:52 am

These goodly fellas could give you some advice.

The Official CS Lancer Thread!
viewtopic.php?t=98180

User avatar
pjfred
Trinituner Peong
Posts: 449
Joined: February 8th, 2011, 9:18 pm

Re: cs3 trnsmission

Postby pjfred » December 3rd, 2016, 11:52 am

Invecs 3, do a little research. All
You need is to drive the car a little rough

mark27
Street 2NR
Posts: 35
Joined: May 10th, 2016, 2:44 pm

Re: cs3 trnsmission

Postby mark27 » December 5th, 2016, 6:44 pm

Okay i took your advice and started roughing up the car so to say. Car was lady driven to and from work in traffic. Will let you guys know how it turns out.

mark27
Street 2NR
Posts: 35
Joined: May 10th, 2016, 2:44 pm

Re: cs3 trnsmission

Postby mark27 » December 15th, 2016, 9:54 pm

Well after a couple weeks of driving the car differently, it works much better. It's more responsive and drives somewhat sporty. Strange but i like it. Thanks for the help guys.

andre12
Riding on 13's
Posts: 6
Joined: March 13th, 2013, 11:51 am

Re: cs3 trnsmission

Postby andre12 » January 27th, 2017, 4:33 pm

gooda guy i have a local cs3 lancer with a 4g18 engine , its work real perfect no problem but i did a engine wash and since dat the engine pick up a mist i change the 4 plugs and blow out the 4 plughole it had water but i still getin the mist any help on dis

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: Google [Bot] and 36 guests