Moderator: 3ne2nr Mods
PapaC wrote:Anybody know how the firm set up the Clifford alarms in them cs3?
Trying to disable the alarm using the switch inside the car, online says you have to turn the key to on and switch it back to off, then press the valet switch inside the car the number of presses that the installer set it up to.
A.W.O.L wrote:Wham zero boi
Long time no hear..
in for same info. I contacted Aditi sportline and still salting.Jade_Inc. wrote:Anyone know where I can get the sway bar bushing and clamp for the rear of a CS3 lancer?
Casper23 wrote:Can anyone tell me how they clean the cs fuel filter when it's in the tank
turbo_beast369 wrote:Casper23 wrote:Can anyone tell me how they clean the cs fuel filter when it's in the tank
The fuel filter in the tank is a sealed unit so the complete fuel filter assembly has to be replaced when dirty.
If you interested I have a brand new Genuine Mitsubishi Fuel Filter Assembly for non GDI CS Lancers for sale. I converted to GDI so I can't use it anymore.
nissan4life wrote:To go GDI turbo, kar see any other reason for that decision unless turbobeast get the engine free.lol
Fellas when goin up paramin(yes i know gdi not made for hill) car bucks and sounds like it wants to cut off and i loose power on the hill. especially if i stop on the hill.
These days i going with god and just hitting the hill with momentum hopig nobody coming down, once the car doesnt come to a stop i climb the hill easy, if i come to a stop is pressure.
What you guys think, solenoid on tranny or a pressure sensor?
tranmission works flawless other wise in flat and lady young,no problems watsoever.
wagonrunner wrote:in for same info. I contacted Aditi sportline and still salting.Jade_Inc. wrote:Anyone know where I can get the sway bar bushing and clamp for the rear of a CS3 lancer?
Jade_Inc. wrote:wagonrunner wrote:in for same info. I contacted Aditi sportline and still salting.Jade_Inc. wrote:Anyone know where I can get the sway bar bushing and clamp for the rear of a CS3 lancer?
Bai, I going and make the L bracket and work up a clamp and still holes to suit yes.
ZeroOne wrote:So you running 4G93 GDI now?
cinco wrote:Jade_Inc. wrote:wagonrunner wrote:in for same info. I contacted Aditi sportline and still salting.Jade_Inc. wrote:Anyone know where I can get the sway bar bushing and clamp for the rear of a CS3 lancer?
Bai, I going and make the L bracket and work up a clamp and still holes to suit yes.
Once you have a template or an old bracket a machine shop could make it up for you. In my experience the after market brackets that come with example energy suspension bushings don't ever fit stock locations well
Users browsing this forum: No registered users and 11 guests