TriniTuner.com  |  Latest Event:  

Forums

The Official CS Lancer Thread!

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

User avatar
wagonrunner
TriniTuner 24-7
Posts: 13227
Joined: May 18th, 2004, 9:38 am
Location: Distancing myself from those who want to raid the barn but eh want to plant the corn.
Contact:

Re: The Official CS Lancer Thread!

Postby wagonrunner » December 24th, 2019, 1:12 am

Isn't the Lancer ES 2012 a CY chassis?
If it is, you would faster get answers for that chassis in the CY lancer (08 lancer) thread
Lyox wrote:Hisn't tLancer ES 2012? The car already comes with FUSE, so I don't want to lose any of those functions. I heard N-05 and N-04 are compatible with all functions working.
2. Is it possible to buy a 08-10 MMCS and have it work, or do FUSE equipped cars require only 2011+ navs?
3. I really just want an OEM nav, so would my best bet be waiting to find one for sale online, or going to the dealership and having them order/install everything? Does anyone know how much this would cost?
4. What are my options when it comes to installing an OEM nav on my car? Can I only use 2011+ since my car is 2012 or can I go with the 08-10 version and have a dealership adjust it?

Advertisement
User avatar
noobie
Street 2NR
Posts: 57
Joined: November 2nd, 2005, 3:59 pm

Re: The Official CS Lancer Thread!

Postby noobie » December 27th, 2019, 1:30 pm

Hey all, my mom has a CS3 Lancer, 2001 model.
The automatic gear lever broke.

Image

Image

Image

Any idea where I can get this part? Checking online and I had no luck sourcing the exact part I needed.

User avatar
Black Scorpion
Trinituner Peong
Posts: 441
Joined: March 23rd, 2004, 10:46 am
Location: Trinidad

Re: The Official CS Lancer Thread!

Postby Black Scorpion » December 28th, 2019, 9:59 am

Check foreign used places, scrapyards, facebook etc

User avatar
wagonrunner
TriniTuner 24-7
Posts: 13227
Joined: May 18th, 2004, 9:38 am
Location: Distancing myself from those who want to raid the barn but eh want to plant the corn.
Contact:

Re: The Official CS Lancer Thread!

Postby wagonrunner » December 28th, 2019, 6:51 pm

noobie wrote:The automatic gear lever broke.
Any idea where I can get this part? Checking online and I had no luck sourcing the exact part I needed.

i replaced mine with a generic
was under ~$60 at the parts place.
been in use for some years.

User avatar
nismotrinidappa
3NE2NR is my LIFE
Posts: 832
Joined: October 31st, 2005, 12:33 am
Location: under d diff
Contact:

Re: The Official CS Lancer Thread!

Postby nismotrinidappa » January 3rd, 2020, 10:19 am

Who does transmission flush and cost?

User avatar
BrotherHood
TriniTuner 24-7
Posts: 8233
Joined: October 20th, 2010, 2:41 pm
Location: Bringing HID & LED to a location near you! 355-3165. 704-5442 (WhatsApp).

Re: The Official CS Lancer Thread!

Postby BrotherHood » January 4th, 2020, 3:38 pm

nismotrinidappa wrote:Hi guys need some help. Bought a cs3 and rotors bad bad. Installed a foreign used pair and new titanium brakes.. worked good but noisy and squealing. Rotors weren't cleaned . I put back on the old pads which has life. Squeaking and noise went for a good few days but now have serious pad rattle noise and squealing started. I feel clips or shim missing. Anybody can help with finding or buying shims and clips? Will try to scrap out soon and see what going on.. Anybody have any other ideas?

Some pads bought brand new come with the little metal shims. Wagner.

User avatar
nismotrinidappa
3NE2NR is my LIFE
Posts: 832
Joined: October 31st, 2005, 12:33 am
Location: under d diff
Contact:

Re: The Official CS Lancer Thread!

Postby nismotrinidappa » January 5th, 2020, 5:14 am

Thanks bh. I got through. Two clips were broken and I bought a foreign used caliper to get the parts. No noise since!

Rishi1090
Riding on 13's
Posts: 3
Joined: August 1st, 2018, 6:04 pm

Postby Rishi1090 » January 19th, 2020, 8:21 pm

Hi guys any 4g92 mivec and gearbox for sale?

User avatar
PapaC
Riding on 17's
Posts: 1383
Joined: December 13th, 2007, 12:25 pm

Re: The Official CS Lancer Thread!

Postby PapaC » January 20th, 2020, 9:34 am

I have the same issue, you found one?

noobie wrote:Hey all, my mom has a CS3 Lancer, 2001 model.
The automatic gear lever broke.

Image

Image

Image

Any idea where I can get this part? Checking online and I had no luck sourcing the exact part I needed.

User avatar
nicholasfabulous
Street 2NR
Posts: 32
Joined: May 12th, 2013, 9:47 pm

Re: The Official CS Lancer Thread!

Postby nicholasfabulous » January 20th, 2020, 2:13 pm

Looking for ck mivec plug wires to buy new or used

Furlz
3NE 2NR for life
Posts: 113
Joined: July 16th, 2007, 4:41 pm

Re: The Official CS Lancer Thread!

Postby Furlz » January 31st, 2020, 2:42 pm

Looking for a valve lock for a 4g15 or 4g18 sohc.

User avatar
Monk BANzai
3NE 2NR Moderator
Posts: 18357
Joined: April 19th, 2003, 6:46 pm
Location: 2 Laws of 2NR. 1. You can't turn a hoe into a housewife. 2. The Streets are Undefeated.

Re: The Official CS Lancer Thread!

Postby Monk BANzai » March 2nd, 2020, 11:53 am

Good day esteemed gentlemen....i am looking for a used 4G63 starter, part number 1810A001 for a CS9a ralliart. Any leads would be most appreciative.

User avatar
droppa
punchin NOS
Posts: 4191
Joined: January 2nd, 2004, 9:20 am
Location: when in doubt, use 4Lo!!!!!!

Re: The Official CS Lancer Thread!

Postby droppa » March 12th, 2020, 10:54 am

Good day, wish I had looked for this thread sooner

So I swapped my CS3 from 4 hole to CS5 5 hole and 4-wheel discs. Adding to this some Enkei tarmac evo rims and 225/45/17 sailuns.

Car look good everything nice, but was I wrong about that combo, car squats and the rear fenders scrub like crazy.

Did fender roll, used H rubbers, set camber a bit more negative and still, to realize it’s the bumper tab and bolt causing the issues.

Anyone ever fixed this issue
17x8 with 225/45 scrubbing

Ar3sCarbon
Riding on 13's
Posts: 1
Joined: April 2nd, 2020, 8:42 pm

Re: The Official CS Lancer Thread!

Postby Ar3sCarbon » April 2nd, 2020, 9:09 pm

droppa wrote:Good day, wish I had looked for this thread sooner

So I swapped my CS3 from 4 hole to CS5 5 hole and 4-wheel discs. Adding to this some <a class="vglnk" target="_blank" href="http://i.viglink.com/?key=cf6433ae6f0f91435bb44c52190d1e92&insertId=94fcc98ce7253f5e&type=L&exp=-1%3Ana%3A0&libId=k8jhgmp3010006yg000MAeuezde21&loc=http%3A%2F%2Ftrinituner.com%2Fv4%2Fforums%2Fposting.php%3Ff%3D33%26mode%3Dreply%26t%3D98180%26sid%3D08b433a6c4f8d928ab87ad15e049faf9&v=1&iid=94fcc98ce7253f5e&opt=true&out=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3Denkei&ref=http%3A%2F%2Ftrinituner.com%2Fv4%2Fforums%2Fposting.php%3Fmode%3Dreply%26f%3D33%26t%3D98180&title=trinituner.com%20-Post%20a%20reply&txt=%3Cspan%3EEnkei%3C%2Fspan%3E" rel="nofollow"><span>Enkei</span></a> tarmac evo rims and 225/45/17 sailuns.

Car look good everything nice, but was I wrong about that combo, car squats and the rear fenders scrub like crazy.

Did fender roll, used H rubbers, set camber a bit more negative and still, to realize it’s the bumper tab and bolt causing the issues.

Anyone ever fixed this issue
17x8 with 225/45 scrubbing


I'm running a 17x9 +20 with 215/40 and my car doesn't rub, even with zero camber. I'm using Rev9 Coilovers with Billet Rear LCA and Godspeed Toe and Camber arms. My car also doesn't sag when you I load the trunk or carry a lot of passengers.

User avatar
Monk BANzai
3NE 2NR Moderator
Posts: 18357
Joined: April 19th, 2003, 6:46 pm
Location: 2 Laws of 2NR. 1. You can't turn a hoe into a housewife. 2. The Streets are Undefeated.

Re: The Official CS Lancer Thread!

Postby Monk BANzai » April 4th, 2020, 1:39 am

Ar3sCarbon wrote:
droppa wrote:Good day, wish I had looked for this thread sooner

So I swapped my CS3 from 4 hole to CS5 5 hole and 4-wheel discs. Adding to this some <a class="vglnk" target="_blank" href="http://i.viglink.com/?key=cf6433ae6f0f91435bb44c52190d1e92&insertId=94fcc98ce7253f5e&type=L&exp=-1%3Ana%3A0&libId=k8jhgmp3010006yg000MAeuezde21&loc=http%3A%2F%2Ftrinituner.com%2Fv4%2Fforums%2Fposting.php%3Ff%3D33%26mode%3Dreply%26t%3D98180%26sid%3D08b433a6c4f8d928ab87ad15e049faf9&v=1&iid=94fcc98ce7253f5e&opt=true&out=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3Denkei&ref=http%3A%2F%2Ftrinituner.com%2Fv4%2Fforums%2Fposting.php%3Fmode%3Dreply%26f%3D33%26t%3D98180&title=trinituner.com%20-Post%20a%20reply&txt=%3Cspan%3EEnkei%3C%2Fspan%3E" rel="nofollow"><span>Enkei</span></a> tarmac evo rims and 225/45/17 sailuns.

Car look good everything nice, but was I wrong about that combo, car squats and the rear fenders scrub like crazy.

Did fender roll, used H rubbers, set camber a bit more negative and still, to realize it’s the bumper tab and bolt causing the issues.

Anyone ever fixed this issue
17x8 with 225/45 scrubbing


I'm running a 17x9 +20 with 215/40 and my car doesn't rub, even with zero camber. I'm using Rev9 Coilovers with Billet Rear LCA and Godspeed Toe and Camber arms. My car also doesn't sag when you I load the trunk or carry a lot of passengers.


any pics of this setup? interested to see how that +20 offset looks...

User avatar
hard head
Street 2NR
Posts: 53
Joined: March 27th, 2007, 1:38 pm
Location: P/TOWN

Re: The Official CS Lancer Thread!

Postby hard head » April 18th, 2020, 6:47 am

Good day all looking for a gas tank for the cs3 lancer

ikon
Riding on 13's
Posts: 3
Joined: August 26th, 2013, 10:06 pm

Re: The Official CS Lancer Thread!

Postby ikon » April 26th, 2020, 9:01 pm

The guy with the broken shifter all you need is the gear sleeve sold @ Faiz Auto Marabella.

1/4 mile king
Street 2NR
Posts: 57
Joined: August 10th, 2008, 2:53 am

Re: The Official CS Lancer Thread!

Postby 1/4 mile king » May 2nd, 2020, 12:55 pm

Can anyone tell me the part number of the original brain box (ecu, ecm) for the cs3 glx local 2003 2004 lancer pbr model from diamond motors? I got a substitute one that leaves the check light on after doing over 2000rpm and won't come off unless i switch off and switch on the ignition.

User avatar
Kronik
12 pounds of Boost
Posts: 2240
Joined: July 23rd, 2004, 9:37 pm
Location: Central
Contact:

Re: The Official CS Lancer Thread!

Postby Kronik » May 2nd, 2020, 4:52 pm

1/4 mile king wrote:Can anyone tell me the part number of the original brain box (ecu, ecm) for the cs3 glx local 2003 2004 lancer pbr model from diamond motors? I got a substitute one that leaves the check light on after doing over 2000rpm and won't come off unless i switch off and switch on the ignition.
You need to say what engine you have in the car 4G15?

User avatar
trent
Riding on 17's
Posts: 1478
Joined: May 27th, 2010, 1:18 pm

Re: The Official CS Lancer Thread!

Postby trent » May 2nd, 2020, 8:17 pm

Kronik wrote:
1/4 mile king wrote:Can anyone tell me the part number of the original brain box (ecu, ecm) for the cs3 glx local 2003 2004 lancer pbr model from diamond motors? I got a substitute one that leaves the check light on after doing over 2000rpm and won't come off unless i switch off and switch on the ignition.
You need to say what engine you have in the car 4G15?


Either:
MN132785 or
MR578516

assuming it's the 4G18 as u said CS3.

1/4 mile king
Street 2NR
Posts: 57
Joined: August 10th, 2008, 2:53 am

Re: The Official CS Lancer Thread!

Postby 1/4 mile king » May 5th, 2020, 8:13 pm

trent wrote:
Kronik wrote:
1/4 mile king wrote:Can anyone tell me the part number of the original brain box (ecu, ecm) for the cs3 glx local 2003 2004 lancer pbr model from diamond motors? I got a substitute one that leaves the check light on after doing over 2000rpm and won't come off unless i switch off and switch on the ignition.
You need to say what engine you have in the car 4G15?


Either:
MN132785 or
MR578516

assuming it's the 4G18 as u said CS3.


I'm sorry, it's the 4g18 automatic cvt. Anyone of those two part numbers will work properly without leaving the check light on right??

User avatar
morefire24
Ricer
Posts: 19
Joined: August 8th, 2012, 7:28 pm

Re: The Official CS Lancer Thread!

Postby morefire24 » May 14th, 2020, 7:12 pm

Any ck right, back door glass motor for sale

soundboi86
Street 2NR
Posts: 52
Joined: June 10th, 2010, 10:30 am

Re: The Official CS Lancer Thread!

Postby soundboi86 » May 24th, 2020, 6:44 pm

Can anyone tell meh where can i get the act clutch kit for the 4g18? I had checked alot of parts place and they dont even have the original.

teffy787
Riding on 13's
Posts: 1
Joined: January 28th, 2018, 9:12 am

Re: The Official CS Lancer Thread!

Postby teffy787 » June 4th, 2020, 6:10 am

Good day, can someone point me in the directions to get some new oem lancer parts at a reasonable price.

mazdabuggy
Riding on 13's
Posts: 1
Joined: December 9th, 2009, 7:26 pm
Location: mazda city

where to find headlight

Postby mazdabuggy » August 25th, 2020, 8:26 pm

where to get this exact headlight in trini
Attachments
prolan.jpg

User avatar
fras
Chronic 2NR
Posts: 2143
Joined: August 25th, 2005, 8:34 pm
Location: Penal

Re: The Official CS Lancer Thread!

Postby fras » August 27th, 2020, 11:44 am

Guys, anyone has the part # of the clock spring for CS3A?

AJM1
Riding on 13's
Posts: 1
Joined: August 31st, 2020, 10:32 am

Re: The Official CS Lancer Thread!

Postby AJM1 » August 31st, 2020, 11:17 am

hi does anyone know the compression specs for the 4g15 gdi engine ?

User avatar
trent
Riding on 17's
Posts: 1478
Joined: May 27th, 2010, 1:18 pm

Re: The Official CS Lancer Thread!

Postby trent » September 1st, 2020, 8:07 am

fras wrote:Guys, anyone has the part # of the clock spring for CS3A?

MR301705
MR583930

User avatar
fras
Chronic 2NR
Posts: 2143
Joined: August 25th, 2005, 8:34 pm
Location: Penal

Re: The Official CS Lancer Thread!

Postby fras » September 11th, 2020, 2:48 pm

Thanks man

User avatar
fras
Chronic 2NR
Posts: 2143
Joined: August 25th, 2005, 8:34 pm
Location: Penal

Re: where to find headlight

Postby fras » September 11th, 2020, 3:04 pm

mazdabuggy wrote:where to get this exact headlight in trini

Are you the same guy that was asking about this light on facebook?
Dont think you'll get this light here... I ordered a set back in 2015 and paid about $3500 ttd landed!
Image

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 9 guests