subie guys using ACT heavy duty PP...

[Mad Antz]

I realised many guys are using the act heavy duty pressure plate with a street and strip clutch, as am I.

I have had my forester for about 4months now and after the 1st month i noticed the clutch master cyl leaking, so i replaced the internals with japanese replacements.


6weeks after it leaks again. so i decide to relpace the cylinder with a fu. now when you place a slight pressure on the pedal it drops slowly showing that the fluid is passing the rubbers.

Also if i am making qwk shifts the pedal sticks down and sometime in traffic it would grate when i put in first but if i relased the clutch and press again its fine.

if anyone can offer a solution for this problem i would greatly appreciate it.

[air wick]

That real strange, I using the Stage 1 Excedy with no problems

[Mad Antz]

hmmm maybe i will try replacing the rubbers on the fu cylinder as well....anyone else?

[professor]

I had this problem once before, it had to do with the clutch release adjustment.

[Anthony624]

I had a similar problem purchased a rebuild kit for the master cylinder and a whole new slave.
All OEM parts.
Problem was solved after

[Mad Antz]

ok cool where you got the parts?

[Anthony624]

Xr Performance 735-1086

[Mad Antz]

thanks