TriniTuner.com  |  Latest Event:  

Forums

HELP GEARBOX REBUILD (Got Through)

Fuji Heavy Industry tech talk - STi, WRX, Forester etc.

Moderator: 3ne2nr Mods

User avatar
TheBoostLord
3NE2NR is my LIFE
Posts: 849
Joined: January 16th, 2006, 1:51 pm
Location: 4th Ave & 5th St. Barataria

HELP GEARBOX REBUILD (Got Through)

Postby TheBoostLord » January 21st, 2015, 9:40 am

I have been looking for someone to rebuild my gearbox for months and cannot seem to locate anyone. The few persons i did contact, dont have the free time to do it. Before I go out and look for a replacement Im making a final attempt to find someone.

5fwd gc8 sti box. 4.44 ratio.

Someone drove the car and it came back on a flatbed. Front shafts are spinning but the rear output shaft that goes to the driveshaft is locking up. I have been told the centre diff is probably blown. It is also stuck in 4th gear. Gearbox is out of the car.

Can anyone recommend a dependable shop or mechanic where i can drop off the box, have it repaired and then pick it up? Need this done ASAP.

Also if anyone knows where i can get a 4.44 gearbox for a REASONABLE cost, please inform me.

I can be reached at 310-0223
Thanks.
Last edited by TheBoostLord on February 2nd, 2015, 5:50 pm, edited 1 time in total.

Advertisement
User avatar
outkast
Street 2NR
Posts: 37
Joined: January 4th, 2010, 10:07 pm

Re: HELP GEARBOX REBUILD

Postby outkast » January 21st, 2015, 8:30 pm

There is a guy in maracas st.joseph close to silver bridge.check him, not sure of his name

16 cycles
punchin NOS
Posts: 4365
Joined: May 10th, 2003, 9:25 am

Re: HELP GEARBOX REBUILD

Postby 16 cycles » January 22nd, 2015, 9:30 am

post in the rally forum - there might be ppl there who can rebuild a gbox.

I remember a forum member De Bench (rally) being able to do this but don't think he is in Trinidad anymore.

Tam - tobago might be able to help

User avatar
TheBoostLord
3NE2NR is my LIFE
Posts: 849
Joined: January 16th, 2006, 1:51 pm
Location: 4th Ave & 5th St. Barataria

Re: HELP GEARBOX REBUILD

Postby TheBoostLord » January 23rd, 2015, 10:47 am

Thanks guys

User avatar
mitsu
3NE 2NR for life
Posts: 144
Joined: May 16th, 2003, 10:49 am

Re: HELP GEARBOX REBUILD

Postby mitsu » January 30th, 2015, 4:25 pm

Tola recently rebuilt my 6spd gearbox changing the 3rd,4th,5th,6th synchro's, diff bearings. 8-)

User avatar
TheBoostLord
3NE2NR is my LIFE
Posts: 849
Joined: January 16th, 2006, 1:51 pm
Location: 4th Ave & 5th St. Barataria

Re: HELP GEARBOX REBUILD

Postby TheBoostLord » February 2nd, 2015, 5:49 pm

thanks to all. got through

User avatar
air wick
I LUV THIS PLACE
Posts: 926
Joined: July 5th, 2005, 12:51 pm

Re: HELP GEARBOX REBUILD (Got Through)

Postby air wick » February 3rd, 2015, 8:13 am

mind sharing who did it for you?

User avatar
TheBoostLord
3NE2NR is my LIFE
Posts: 849
Joined: January 16th, 2006, 1:51 pm
Location: 4th Ave & 5th St. Barataria

Re: HELP GEARBOX REBUILD (Got Through)

Postby TheBoostLord » February 5th, 2015, 9:07 pm

i actually got a replacement gearbox very cheap. I did however scrap the damaged box and im going to do the rebuild myself.

User avatar
supercharged turbo
punchin NOS
Posts: 3059
Joined: January 19th, 2011, 6:53 pm
Location: turn around

Re: HELP GEARBOX REBUILD (Got Through)

Postby supercharged turbo » February 9th, 2015, 7:28 pm

You should take some pics of the rebuild..i think it would be good for learning

Advertisement

Return to “SUBARU”

Who is online

Users browsing this forum: No registered users and 4 guests