TriniTuner.com | Latest Event:
Moderator: 3ne2nr Mods
Lance wrote:There are a few options you can go with - legacy, STi or WRX 2-pots. legacy and WRX are 5x100 so you will be able to retain your wheels - If you are doing STi then you would need pre-2004 spindles to keep things 5x100
Either way, you would probably need the following:
1. Rear Spindles with handbrake assembly
2. Calipers
3. Rotors
4. Brakelines
5. Pads
Lance wrote:You can probably check the usual used dealers in the bamboo. Gobin, ramkissons etc.
They will also have a very good idea of the exact parts you will need for the conversion.
Users browsing this forum: No registered users and 19 guests