TriniTuner.com | Latest Event:
Moderator: 3ne2nr Mods
Toyopet wrote:I am not 100% sure about the spindles, I will have to find out the guy I'm getting the parts from has them available.
The reason I am looking at Legacy parts is
1- parts for this model Impreza is stupidly hard to find, and
2- parts are kind of expensive.
I am hoping someone here on the forum can confirm if the Legacy setup will work, as a lot of the parts elsewhere on the car can be taken directly from the BL5 Legacy (trust me, the car got a front end hit and a lot of parts came from the Legacy including the fuse box, intake snorkel thing, condenser, radiator, intake manifold, fender shield and a few other items I can't remember).
black start wrote:Gh3 is 5x100 as well as the bl5. So one less issue there
racedriverpro wrote:Toyopet wrote:I am not 100% sure about the spindles, I will have to find out the guy I'm getting the parts from has them available.
The reason I am looking at Legacy parts is
1- parts for this model Impreza is stupidly hard to find, and
2- parts are kind of expensive.
I am hoping someone here on the forum can confirm if the Legacy setup will work, as a lot of the parts elsewhere on the car can be taken directly from the BL5 Legacy (trust me, the car got a front end hit and a lot of parts came from the Legacy including the fuse box, intake snorkel thing, condenser, radiator, intake manifold, fender shield and a few other items I can't remember).
If I see what is on the car now I should be able to confirm whether they can be replaced with those from the bl5.
Things to consider...
1.Bolt spacing of the bl5 is 5x100
2.Proportioning valve adjustments
3.I would assume bl5 rear discs would be larger than gh3 and may not be proportionate with stock gh2 front
4...not sure abt fitment of rear axels if applicable.
GTR Fever wrote:That means you have a GH2, GH3 is AWD.
I have GH3 rear disc spindles if you are interested. You will need to re-use your wheel bearing/ hub assembly and good to go.
GTR Fever wrote:Didn't I install the seatbelts and steering for you? Message me when you ready for the rear disc setup.
Users browsing this forum: No registered users and 12 guests