TriniTuner.com  |  Latest Event:  

Forums

Mazda 323 Issue Thread: Post your problem.

MAZDA People United - it continues here

Moderator: 3ne2nr Mods

User avatar
cinco
TriniTuner 24-7
Posts: 18229
Joined: January 6th, 2006, 3:21 pm
Location: Does this rag smell like chloroform to you?
Contact:

Re: Mazda 323 Issue Thread: Post your problem.

Postby cinco » March 30th, 2016, 4:11 pm

tytano wrote:Good day guys I need your option on engine change I currently have a Z5 engine in my Mazda BH
I keep hearing ppl talking bout swap it for a SR20 but I am a bit skeptical about cross breading as they call it
Does the mount's lineup the same as the BH or will I have to get someone to welder?
And what about wiring does anyone have a diagram for that?
Does it make sense going SR20
Even tho a complete z5 is hard to get now. What you guys think.

You could go zlve or fsde easily. I wouldn't bother to work up an Sr when a zl is a direct swap

Advertisement
User avatar
tytano
Street 2NR
Posts: 38
Joined: July 21st, 2009, 7:47 pm
Location: not by you
Contact:

Re: Mazda 323 Issue Thread: Post your problem.

Postby tytano » March 30th, 2016, 8:53 pm

Ok thanks bro I learning as I go along. This zl carry the same mounts as the Z5? If so I will call around tmmw cause I need one urgently

User avatar
cinco
TriniTuner 24-7
Posts: 18229
Joined: January 6th, 2006, 3:21 pm
Location: Does this rag smell like chloroform to you?
Contact:

Re: Mazda 323 Issue Thread: Post your problem.

Postby cinco » March 30th, 2016, 9:05 pm

Yup same mounting points

shimon
3NE 2NR for life
Posts: 218
Joined: September 17th, 2009, 9:57 pm

Re: Mazda 323 Issue Thread: Post your problem.

Postby shimon » March 30th, 2016, 9:23 pm

Plus you will be depreciating the car considerably by cross breeding it better you go zl or zm bro.

User avatar
tytano
Street 2NR
Posts: 38
Joined: July 21st, 2009, 7:47 pm
Location: not by you
Contact:

Re: Mazda 323 Issue Thread: Post your problem.

Postby tytano » March 30th, 2016, 9:42 pm

Thank you a lot guys I will update you on what I get I will be heading to the bamboo tmmw

shimon
3NE 2NR for life
Posts: 218
Joined: September 17th, 2009, 9:57 pm

Re: Mazda 323 Issue Thread: Post your problem.

Postby shimon » March 31st, 2016, 12:23 am

Ok bro goodluck

User avatar
tytano
Street 2NR
Posts: 38
Joined: July 21st, 2009, 7:47 pm
Location: not by you
Contact:

Re: Mazda 323 Issue Thread: Post your problem.

Postby tytano » March 31st, 2016, 7:29 pm

Guys goodnight found a good zl but I need a good electrician cause the wire harness is different to the Z5 harness

User avatar
tytano
Street 2NR
Posts: 38
Joined: July 21st, 2009, 7:47 pm
Location: not by you
Contact:

Re: Mazda 323 Issue Thread: Post your problem.

Postby tytano » May 18th, 2016, 1:37 pm

guys morning i need help. i have a madza BH 1996 i change my engine to Z5. i hook up everything now when i try to start the engine crank but wont start check for spark got none from the distributor. Electrician was to come saturday and today but they didnt show. any advice guys?

SonyTony
Riding on 13's
Posts: 3
Joined: September 28th, 2016, 2:06 pm

Re: Mazda 323 Issue Thread: Post your problem.

Postby SonyTony » September 28th, 2016, 2:11 pm

where can i get the wiper arm mechanism for the 323 glx model?

SonyTony
Riding on 13's
Posts: 3
Joined: September 28th, 2016, 2:06 pm

Re: Mazda 323 Issue Thread: Post your problem.

Postby SonyTony » September 28th, 2016, 2:13 pm

And why does my 323 look different? mine have twp headlights in one lense...the outer is low and the inner comes on with the high beam..and my I.D. lights are integrated in with the tail lights...is this what they call a foreign used version?

SonyTony
Riding on 13's
Posts: 3
Joined: September 28th, 2016, 2:06 pm

Re: Mazda 323 Issue Thread: Post your problem.

Postby SonyTony » September 28th, 2016, 2:16 pm

my dashboard lights are flickering. Is that an alternator problem? it was recently changed and the plug going into the alternator was also changed...i also have a brand new Optima yellow top battery... i heard that it could be the resistor in the alternator or to change the battery terminals

flipswitch5point
3NE 2NR for life
Posts: 209
Joined: July 9th, 2009, 6:16 pm

Re: Mazda 323 Issue Thread: Post your problem.

Postby flipswitch5point » September 28th, 2016, 2:43 pm

When is it flickering? Only when driving? Or when parked as well? Check with a multimeter if it's happening when parked to narrow it down.

User avatar
rayrayray
Street 2NR
Posts: 75
Joined: November 18th, 2009, 12:29 am

Re: Mazda 323 Issue Thread: Post your problem.

Postby rayrayray » October 8th, 2017, 3:53 pm

MAZDA People United

Ok so my 323 familia (bj) temp gauge not working , it was fine up until 1pm when I sent it to clean the throttle body , any help to trouble shoot will be appreciated , where is the sensor or jack located on the engine? Step by step instruction will be very helpful thanks , I'm trying u tube as well

viewtopic.php?t=45475#p9604347

User avatar
rayrayray
Street 2NR
Posts: 75
Joined: November 18th, 2009, 12:29 am

Re: Mazda 323 Issue Thread: Post your problem.

Postby rayrayray » October 8th, 2017, 3:53 pm

Any help appreciated

shimon
3NE 2NR for life
Posts: 218
Joined: September 17th, 2009, 9:57 pm

Re: Mazda 323 Issue Thread: Post your problem.

Postby shimon » October 8th, 2017, 3:56 pm

Follow the coolant hose right over the tranny there is a flange you will see a single black wire with a black connector that is the connector the other Grey two pin connector is the coolant temp sensor

User avatar
rayrayray
Street 2NR
Posts: 75
Joined: November 18th, 2009, 12:29 am

Re: Mazda 323 Issue Thread: Post your problem.

Postby rayrayray » October 8th, 2017, 4:14 pm

Thanks

User avatar
rayrayray
Street 2NR
Posts: 75
Joined: November 18th, 2009, 12:29 am

Re: Mazda 323 Issue Thread: Post your problem.

Postby rayrayray » October 8th, 2017, 4:43 pm

Hey bro , traced the line and the sensor is broken , will have it replaced soon , thanks a mil again !

shimon
3NE 2NR for life
Posts: 218
Joined: September 17th, 2009, 9:57 pm

Re: Mazda 323 Issue Thread: Post your problem.

Postby shimon » October 8th, 2017, 4:53 pm

Great man Your welcome

User avatar
DEVIANT
Street 2NR
Posts: 67
Joined: March 6th, 2007, 2:34 pm
Location: Arima
Contact:

Re: Mazda 323 Issue Thread: Post your problem.

Postby DEVIANT » October 11th, 2017, 5:21 pm

Good Day Everyone,

I have a 2002 Mazda 323 protege with a stock zmde engine and automatic transmission. My transmission needs to be replaced and I am looking for either an automatic transmission or a manual gearbox. They are very difficult to locate,
Can anyone assist me in locating one?. Is there any cheaper and easier alternatives that I can consider?

.

User avatar
rayrayray
Street 2NR
Posts: 75
Joined: November 18th, 2009, 12:29 am

Re: Mazda 323 Issue Thread: Post your problem.

Postby rayrayray » March 1st, 2018, 8:32 pm

My bj rpm dropping and car shutting off , im seeing oil lamp and battery , both of which is in good standing , battery properly secured and a year again to go , oil level ok , any ideas ?

User avatar
rayrayray
Street 2NR
Posts: 75
Joined: November 18th, 2009, 12:29 am

Re: Mazda 323 Issue Thread: Post your problem.

Postby rayrayray » March 1st, 2018, 8:33 pm

Has anyone ever had problems with their oil pressure switch on bj models ?

User avatar
Strugglerzinc
punchin NOS
Posts: 3126
Joined: July 1st, 2005, 11:11 am
Location: Second star to the right.

Re: Mazda 323 Issue Thread: Post your problem.

Postby Strugglerzinc » March 7th, 2018, 12:52 pm

Oil and battery lights will always be on with ignition on, engine off.

User avatar
tim69tt
Riding on 13's
Posts: 2
Joined: January 4th, 2007, 1:23 pm

Re: Mazda 323 Issue Thread: Post your problem.

Postby tim69tt » March 12th, 2018, 7:43 pm

Hey guys, anybody ever change the abs control module on their singapore 323 F ?

Friend of mine changed his because of a leak and now his speedometer and odometer not working.

Any suggestions fellas?
Attachments
IMG-20180312-WA0006.jpg

User avatar
rayrayray
Street 2NR
Posts: 75
Joined: November 18th, 2009, 12:29 am

Re: Mazda 323 Issue Thread: Post your problem.

Postby rayrayray » March 30th, 2018, 7:39 pm

Hope u got the with that odemeter

User avatar
rayrayray
Street 2NR
Posts: 75
Joined: November 18th, 2009, 12:29 am

Re: Mazda 323 Issue Thread: Post your problem.

Postby rayrayray » March 30th, 2018, 7:42 pm

rayrayray wrote:My bj rpm dropping and car shutting off , im seeing oil lamp and battery , both of which is in good standing , battery properly secured and a year again to go , oil level ok , any ideas ?


So after watching a YOu tube video , high engine bay temp , disrupting possibly the cam shaft sensor , I had it replaced , problem still persist , so when I drive with the bonnet open ...no issues , guess it's a over heating thing , but temp gauge normal ...haha

+Mello+
3NE 2NR for life
Posts: 127
Joined: May 16th, 2008, 6:01 pm
Location: Arima
Contact:

Re: Mazda 323 Issue Thread: Post your problem.

Postby +Mello+ » April 17th, 2018, 7:54 am

tim69tt wrote:Hey guys, anybody ever change the abs control module on their singapore 323 F ?

Friend of mine changed his because of a leak and now his speedometer and odometer not working.

Any suggestions fellas?


I am having the exact same problem. The abs brain is on the pump and the 323f Singapore and Japanese brains seem to have differences. The speedo in this model relies on an abs wheel speed sensor for the speedo signal. So you must get a local/singapore abs pump to fix that issue. I tried 2 foreign used pumps and still the same issue. Try unjacking the new pump, jack in the old one and the speedo should work again, just you would have to find a safe spot to strap the old pump near the new one if you intend to leave in like that.

Advertisement

Return to “MAZDA”

Who is online

Users browsing this forum: No registered users and 1 guest