Page 79 of 79

Re: The Mazda 3 thread

Posted: July 22nd, 2018, 3:46 pm
by Strugglerzinc
dredman1 wrote:
Brans wrote:Guys I looking for the best place to do alignment, cambering speed balance etc. I get a vibration on the steering wheel after at higher speeds. Checked laughlin and de gannes who was a waste of time and then Aranguez Alignement Center who were better but still not perfect.

Milage Mack, the south branch if possible.

Make sure and specify to the supervisor you're having the above problem (in more detail if possible) and you're trying to get resolved.


Vibration at high speed, 80kph+, is very rarely an alignment issue. Most likely tyre balance or absolute worst case, an axle problem. Also the BK and BL MZ3 do not camber without a camber kit so don't let anyone BS you.

Re: The Mazda 3 thread

Posted: August 2nd, 2018, 1:57 pm
by Brans
Strugglerzinc wrote:
dredman1 wrote:
Brans wrote:Guys I looking for the best place to do alignment, cambering speed balance etc. I get a vibration on the steering wheel after at higher speeds. Checked laughlin and de gannes who was a waste of time and then Aranguez Alignement Center who were better but still not perfect.

Milage Mack, the south branch if possible.

Make sure and specify to the supervisor you're having the above problem (in more detail if possible) and you're trying to get resolved.


Vibration at high speed, 80kph+, is very rarely an alignment issue. Most likely tyre balance or absolute worst case, an axle problem. Also the BK and BL MZ3 do not camber without a camber kit so don't let anyone BS you.


Thanks alot guys for the advice, i really heard about Milage Mack but I am from the west so south is a pull I might have to check the POS location. I am not seeing any rims damage but I know there could be damage on the tire surface area; is there any where you would recommend to repair rims?

Re: The Mazda 3 thread

Posted: September 28th, 2018, 4:19 pm
by Jade_Inc.
Hey, anyone know where sells new Mazda 3 2007 headlights and rear light? Average price plz

Re: The Mazda 3 thread

Posted: October 6th, 2018, 8:33 pm
by Jade_Inc.
Jade_Inc. wrote:Hey, anyone know where sells new Mazda 3 2007 headlights and rear light? Average price plz
Anyone?

Re: The Mazda 3 thread

Posted: October 8th, 2018, 12:36 pm
by D.A.B
Jade_Inc. wrote:Hey, anyone know where sells new Mazda 3 2007 headlights and rear light? Average price plz

Online, company (southern sales)

Re: The Mazda 3 thread

Posted: October 29th, 2018, 6:08 pm
by Amit
Tranny problem
good day anyone ever had shifting problems from 3 to 4
anyone ever replaced solenoids or tcm
anyone have a tcm i could try (rent) just to find the problem.

Re: The Mazda 3 thread

Posted: November 8th, 2018, 8:43 pm
by konartis
Anyone know where I cud get the mazda 3 window motor gear to buy locally? Mines need replacing, saw it on eBay and Amazon, but I’m sure it must have it locally easily to obtain

Image

Re: The Mazda 3 thread

Posted: November 9th, 2018, 8:19 pm
by Jade_Inc.
Hi... I'm looking for somewhere that sells the cv joints for lf-vd (2.0) engine or the complete axel... Any ideas where I can get it south side?

Re: The Mazda 3 thread

Posted: November 27th, 2018, 5:10 am
by Rayden6
Looking for both o2 sensors for a 2003 Mazda 3 anybody has?

Re: The Mazda 3 thread

Posted: January 3rd, 2019, 7:15 am
by New yum yum
Jade_Inc. wrote:Hi... I'm looking for somewhere that sells the cv joints for lf-vd (2.0) engine or the complete axel... Any ideas where I can get it south side?

I have the cv joint

Re: The Mazda 3 thread

Posted: January 13th, 2019, 3:06 pm
by konartis
Anyone have the 2005 1.6 Mazda engine mounts part numbers?

Re: The Mazda 3 thread

Posted: January 20th, 2019, 7:37 pm
by Rishi1090
Hi good night! Has anyone convert there infotainment system language to english or update there software in there mazda 3?

Re: The Mazda 3 thread

Posted: February 1st, 2019, 10:28 am
by Nexus
^^ Yea Im actually looking for the 2007 mazda 3 engine mount part numbers as well; anybody might have a parts manual?

The Mazda 3 thread

Posted: May 7th, 2019, 10:17 am
by New yum yum
Looking for Mazda 3 Head and Block

Re: The Mazda 3 thread

Posted: May 11th, 2019, 7:01 am
by Duplicolor
Hey guys I recently purchased a 2014 local Mazda 3. Bought it second hand. But now I'm hearing a noise when I'm going up hill mostly as if the tyre is touching the finder but it's not. The car is original height an I'm using stock 16s. Once the car is not on flat an im accelerating im getting this noise seems to be coming from left side rear or front. Can anyone help me ?

Re: The Mazda 3 thread

Posted: June 15th, 2019, 5:58 pm
by konartis
Anyone can direct me to obtain a 2005 local Mazda 3 left side axle, it’s the nut type....got one at the bamboo but it’s a little bigger than mines....not sure where to get this.

Re: The Mazda 3 thread

Posted: August 13th, 2019, 1:34 pm
by shake d livin wake d dead
recommend someone who does tranny oil changes on the mazda 3 axela...thank you

Re: The Mazda 3 thread

Posted: September 15th, 2019, 1:45 am
by d.d.s.
TechMD wrote:You looking for this coolant

Image

Where can I get this locally.

Re: The Mazda 3 thread

Posted: September 15th, 2019, 3:08 pm
by dredman1
Saw the Mazda FL22 coolant in Tune Up Shop Cunupia

Re: The Mazda 3 thread

Posted: September 15th, 2019, 6:51 pm
by d.d.s.
Thanks bro!
dredman1 wrote:Saw the Mazda FL22 coolant in Tune Up Shop Cunupia