trinituner.com

tytano wrote:Good day guys I need your option on engine change I currently have a Z5 engine in my Mazda BH
I keep hearing ppl talking bout swap it for a SR20 but I am a bit skeptical about cross breading as they call it
Does the mount's lineup the same as the BH or will I have to get someone to welder?
And what about wiring does anyone have a diagram for that?
Does it make sense going SR20
Even tho a complete z5 is hard to get now. What you guys think.

You could go zlve or fsde easily. I wouldn't bother to work up an Sr when a zl is a direct swap

Ok thanks bro I learning as I go along. This zl carry the same mounts as the Z5? If so I will call around tmmw cause I need one urgently

Yup same mounting points

Plus you will be depreciating the car considerably by cross breeding it better you go zl or zm bro.

Thank you a lot guys I will update you on what I get I will be heading to the bamboo tmmw

Ok bro goodluck

Guys goodnight found a good zl but I need a good electrician cause the wire harness is different to the Z5 harness

guys morning i need help. i have a madza BH 1996 i change my engine to Z5. i hook up everything now when i try to start the engine crank but wont start check for spark got none from the distributor. Electrician was to come saturday and today but they didnt show. any advice guys?

where can i get the wiper arm mechanism for the 323 glx model?

And why does my 323 look different? mine have twp headlights in one lense...the outer is low and the inner comes on with the high beam..and my I.D. lights are integrated in with the tail lights...is this what they call a foreign used version?

my dashboard lights are flickering. Is that an alternator problem? it was recently changed and the plug going into the alternator was also changed...i also have a brand new Optima yellow top battery... i heard that it could be the resistor in the alternator or to change the battery terminals

When is it flickering? Only when driving? Or when parked as well? Check with a multimeter if it's happening when parked to narrow it down.

MAZDA People United

Ok so my 323 familia (bj) temp gauge not working , it was fine up until 1pm when I sent it to clean the throttle body , any help to trouble shoot will be appreciated , where is the sensor or jack located on the engine? Step by step instruction will be very helpful thanks , I'm trying u tube as well

viewtopic.php?t=45475#p9604347

Any help appreciated

Follow the coolant hose right over the tranny there is a flange you will see a single black wire with a black connector that is the connector the other Grey two pin connector is the coolant temp sensor

Thanks

Hey bro , traced the line and the sensor is broken , will have it replaced soon , thanks a mil again !

Great man Your welcome

Good Day Everyone,

I have a 2002 Mazda 323 protege with a stock zmde engine and automatic transmission. My transmission needs to be replaced and I am looking for either an automatic transmission or a manual gearbox. They are very difficult to locate,
Can anyone assist me in locating one?. Is there any cheaper and easier alternatives that I can consider?

.

My bj rpm dropping and car shutting off , im seeing oil lamp and battery , both of which is in good standing , battery properly secured and a year again to go , oil level ok , any ideas ?

Has anyone ever had problems with their oil pressure switch on bj models ?

Oil and battery lights will always be on with ignition on, engine off.

Hey guys, anybody ever change the abs control module on their singapore 323 F ?

Friend of mine changed his because of a leak and now his speedometer and odometer not working.

Any suggestions fellas?

Hope u got the with that odemeter

rayrayray wrote:My bj rpm dropping and car shutting off , im seeing oil lamp and battery , both of which is in good standing , battery properly secured and a year again to go , oil level ok , any ideas ?

So after watching a YOu tube video , high engine bay temp , disrupting possibly the cam shaft sensor , I had it replaced , problem still persist , so when I drive with the bonnet open ...no issues , guess it's a over heating thing , but temp gauge normal ...haha

tim69tt wrote:Hey guys, anybody ever change the abs control module on their singapore 323 F ?

Friend of mine changed his because of a leak and now his speedometer and odometer not working.

Any suggestions fellas?

I am having the exact same problem. The abs brain is on the pump and the 323f Singapore and Japanese brains seem to have differences. The speedo in this model relies on an abs wheel speed sensor for the speedo signal. So you must get a local/singapore abs pump to fix that issue. I tried 2 foreign used pumps and still the same issue. Try unjacking the new pump, jack in the old one and the speedo should work again, just you would have to find a safe spot to strap the old pump near the new one if you intend to leave in like that.

bumping an old thread!

Need some help with 2 issues, car is 2002 BJ singapore protege model.

the car has a ZL engine installed with the original ZM ecu.

1st problem is no transmission selection light on the instrument panel
2nd problem is when the selector is put into low gear manually it changes from 1st to 2nd when driving and then when its in 2nd gear it runs out all the gears normal instead of keeping it to 2nd.

already checked the neutral safety switch.

cressida_override wrote:bumping an old thread!

Need some help with 2 issues, car is 2002 BJ singapore protege model.

the car has a ZL engine installed with the original ZM ecu.

1st problem is no transmission selection light on the instrument panel
2nd problem is when the selector is put into low gear manually it changes from 1st to 2nd when driving and then when its in 2nd gear it runs out all the gears normal instead of keeping it to 2nd.

already checked the neutral safety switch.

Did you make any progress with this? To me the logical first step would've been to use the appropriate ECM.

tim69tt wrote:Hey guys, anybody ever change the abs control module on their singapore 323 F ?

Friend of mine changed his because of a leak and now his speedometer and odometer not working.

Any suggestions fellas?

Hey, were you ever able to solve this problem?
the exact issue has recently popped up on my mazda 6