Page 1 of 1
lowering a 2011 4x2 Ford Ranger
Posted: January 5th, 2014, 6:45 am
by spanglish1
Looking for some feedback from fellow ranger guys about doing this and whats the best way to lower them to make the ride smoother.
Re: lowering a 2011 4x2 Ford Ranger
Posted: January 8th, 2014, 5:51 am
by spanglish1
No van men around?
Re: lowering a 2011 4x2 Ford Ranger
Posted: January 13th, 2014, 6:23 pm
by spanglish1
this ford forum real dead. looking for good information for fellow tuners like myself
Re: lowering a 2011 4x2 Ford Ranger
Posted: January 17th, 2014, 5:37 pm
by spanglish1
Guess nobody wants to share info here
Re: lowering a 2011 4x2 Ford Ranger
Posted: January 17th, 2014, 6:23 pm
by Ted_v2
Blocks on the rear and drop the front with torsion.
Easy
Re: lowering a 2011 4x2 Ford Ranger
Posted: January 18th, 2014, 1:46 pm
by spanglish1
Did that before and it was the hardest ride ever! Want ideas to make the ride smoother
Re: lowering a 2011 4x2 Ford Ranger
Posted: January 18th, 2014, 2:13 pm
by Ted_v2
get oil shocks
or have a word with scrappy.
rode in a 4x2 2 door ranger with 20" and my werrd. smooth, but stiff
Re: lowering a 2011 4x2 Ford Ranger
Posted: February 10th, 2014, 4:18 pm
by trini240z
was researching lowering, and most sites say blocks can be used if the axel is above the leaf springs. the rangers is below the springs. so how do the blocks work? the rear is currently 3 inches higher than the front, so a 3 inch drop will be good, but will this affect ride comfort if the stock leaf springs are used?