Moderator: 3ne2nr Mods
ShadowNos wrote:DeWalt brushless 20v impact and hammer drill combo for sale $2600 neg. I buy them last year used about 10 times to do stuff around the house, fixed back some dining chairs and install a wall mount for my TV, have them packed down right now. Tools like new, just need someone who will appreciate them more. Reason for sale looking for some cash to upgrade vehicle suspension. Whatsapp - 469-8660 IMG_20180420_174229.jpgIMG_20180420_174417.jpg
Selling them together, need the cashpugboy wrote:price for impact driver alone ?
I dont need batteries or charger
Lance wrote:Any affordable tool repair guys in the east?
I have a portable bandsaw that I table mounted.
Only used it a couple times. Today I was cutting some metal tube and the blade locked up and i started seeing sparks/smoke from the internals. It died right after.
Its a 1000dollar saw, so i'm weighing the options here.
I wah a borrowTed_v2 wrote:Not much. Just under 1k I think.
I bought this in ssl sale yesterday. Just over 2k.
1 5.0 battery
1 2.0 battery and charger.
Cloth carry bag which is lovely.
Midtorque unit. Total beast. Removing torqued wheel nuts on the lowest setting.
Ted_v2 wrote:Not much. Just under 1k I think.
I bought this in ssl sale yesterday. Just over 2k.
1 5.0 battery
1 2.0 battery and charger.
Cloth carry bag which is lovely.
Midtorque unit. Total beast. Removing torqued wheel nuts on the lowest setting. FB_IMG_15246968538619849.jpg
Most cars have a torque for wheels in the 100 ft-lb range. A friend bought new tires and it took about 250 ft-lbs to take his wheels off after about a month. I don't know what they used to install them.Ted_v2 wrote:Not much. Just under 1k I think.
I bought this in ssl sale yesterday. Just over 2k.
1 5.0 battery
1 2.0 battery and charger.
Cloth carry bag which is lovely.
Midtorque unit. Total beast. Removing torqued wheel nuts on the lowest setting.
NR8 wrote:Ted_v2 wrote:anybody saw any good deals on 1/2 impacts cordless locally?
SSL have the midtorque Milwaukee for just over 2500$ .
wanna grab up one by early next month so.
I will have a bnib Craftsman 1/2" impact wrench for sale in about one month's time. Comes with the battery and multi-chemistry charger pictured below. See link for specs. 300 ft/lbs of torque. Handles axle nuts and all suspension bolts with ease. I have had one for about 3 years myself. Just bought it in a combo deal with other tools to add to my C3 collection so I won't need it. Will make a FS post when I get it in hand but estimated price should be <$2000.
spin_prod_1034396012.jpg
spin_prod_947241212.jpg
https://www.craftsman.com/products/craf ... by-4ah-xcp
adnj wrote:Does anyone know where I can buy scrap steel plate for an access cover?
I only need about 18"x18" and 1/8" (min) to 1/4" (max) in thickness.
car wrote:sMASH wrote:hindian wrote:car wrote:Anyone knows where sells metal lathe locally. A bench top 1.
Looking to seabox 1 from amazon but want to see what is available locally.
Looking to get this before budget day.
ive been looking for a while mihself for one but nada. cah afford to pay them ridiculous machine shop price for simple non precision lathe work. a man charge me $150 to turn a 3/4" drill bit shank to 1/2" to fit in a drill. the bit cost about $80
Post a link for an example of what u had in mind.
... and does raptor still operate?
Grizzly G8688 Mini Metal Lathe, 7 x 12-Inch https://www.amazon.com/dp/B0000DCZ7D/re ... HzbH9J5W0P
Or
Grizzly G0768 Variable-Speed Lathe, 8 x 16" https://www.amazon.com/dp/B0121VB63A/re ... Hzb07KEDHM
Ever bought one since this post?3stagevtec wrote:I just can't handle the prices some machine shops does want to charge to do simple bushing work.. I would rather use the same money and invest it in tools and do the job myself. I have built crude DIY 'lathes' in the past to build custom bushes to mount radiators etc.. Like this for example:
[img]https://scontent-mia1-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/12002040_10153490596076084_2357595924144119224_n.jpg?oh=abf4a2eeabda1753ecf3c464b845fec7&oe=56E7D536[/img]
Amazon also has a small hobby lathe, cheap design using a drill and a small frame to hold it:
I understand the side load and excessive run out issues, but I am stubborn too bad, have strong faith in my Milwaukee and would use it for mostly bushing making, so i figure it is worth a gamble.. (in the future, if this shows decent potential, I could always bearing mount the chuck to reduce runout, and create a dampered drive system powered by the drill..)
I will continue researching chucks and update on how this works out.
Its just like the t27 but about 1.5" long for wood applicationTed_v2 wrote:what pitch?
dumore having thing once its machine screws, m10 ect ect.
wood screws allied, it comes with the bits, like t27 .
cutthroatInt wrote:car wrote:sMASH wrote:hindian wrote:car wrote:Anyone knows where sells metal lathe locally. A bench top 1.
Looking to seabox 1 from amazon but want to see what is available locally.
Looking to get this before budget day.
ive been looking for a while mihself for one but nada. cah afford to pay them ridiculous machine shop price for simple non precision lathe work. a man charge me $150 to turn a 3/4" drill bit shank to 1/2" to fit in a drill. the bit cost about $80
Post a link for an example of what u had in mind.
... and does raptor still operate?
Grizzly G8688 Mini Metal Lathe, 7 x 12-Inch https://www.amazon.com/dp/B0000DCZ7D/re ... HzbH9J5W0P
Or
Grizzly G0768 Variable-Speed Lathe, 8 x 16" https://www.amazon.com/dp/B0121VB63A/re ... Hzb07KEDHM
Hey man, u ever got to buy ur lathe? Inbox plz..
Post a 2 pictures nahcar wrote:cutthroatInt wrote:car wrote:sMASH wrote:hindian wrote:car wrote:Anyone knows where sells metal lathe locally. A bench top 1.
Looking to seabox 1 from amazon but want to see what is available locally.
Looking to get this before budget day.
ive been looking for a while mihself for one but nada. cah afford to pay them ridiculous machine shop price for simple non precision lathe work. a man charge me $150 to turn a 3/4" drill bit shank to 1/2" to fit in a drill. the bit cost about $80
Post a link for an example of what u had in mind.
... and does raptor still operate?
Grizzly G8688 Mini Metal Lathe, 7 x 12-Inch https://www.amazon.com/dp/B0000DCZ7D/re ... HzbH9J5W0P
Or
Grizzly G0768 Variable-Speed Lathe, 8 x 16" https://www.amazon.com/dp/B0121VB63A/re ... Hzb07KEDHM
Hey man, u ever got to buy ur lathe? Inbox plz..
Yep. End up buying a precision Matthews.
Return to “Ole talk and more Ole talk”
Users browsing this forum: No registered users and 236 guests