trinituner.com

I Bought a 4x2 BT50

Looking to upgrade speakers

Can anyone tell me the speaker size off hand, they come with.

fitted 6.5in in the front door of our ranger which is basically the same vehicle ..

i belive the same at the back if not then its 5 1/4

i strongly suggest that u dynamat the doors if u only changing out the speakers alone as this will make a whole lot of difference .. the cost is about $150 for both doors but it sounds liek u put in $500 worth of speakers in there

in my daily work van a madza b-2600 i changed the stock radio to a cheapo pioneer and 2 pioneer 6.5 and they sounded good until one evening my bro and i dynamatted the doors and up till now those same speakers amaze me .. i still have the workers believeing i hid a sub in the dash

dats interesting advice Monsterpwr.I'll try dat. In the back doors of my Hilux, i fitted some Jensen 8's 3 way. lots of bass,but vibration too.Exactly how far up and around do you go with the dynamat?

if u in south it could be done in one evening ...

basically u remove the outer door panel and lay it over the door holes

Would this procedure also make the van a bit more sound-proof ? - meaning blocking out external noises?

yes it would help to some degree

floor and hood dampning does a far better job

I think this would be a nice upgrade. Can you tell me where or who does this type of job ?

some audio shops will do that for you and certain audio powersellers sell the damping mats here on tuner..

it is a DIY job as well, the deadner is something similar to flashband to seal leaks on your roof.. i have 2 layers of deadner on my entire vehicle with it, 5 doors and roof.. took me approx 3 days to complete..

one layer in strategically chosen locations can be completely in less than a day by yourself..

this is what i used.. it is also an excellent heat reflector..

http://www.secondskinaudio.com/vibration-mat/damplifier-pro.php

you should look into doing your firewall as well.. see the MotorMat and HeatWave Pro...

wise1 on the forum has the second skin at prices u cant go wrong

pm him if u want .. most doors take approx 1 1/4 sheet to be done properly

booge, its a serious diy job..


Organize some greensands, gimme a pm, bring some ole talk and consider it done man.

Hey i'm looking to do this to a friend of mine's BT-50 and my dad's in the further future... I've yet to remove the door panels to exactly measure the speakers. Do u happen to have any pictures of inside the door and ure dampening install