TriniTuner.com  |  Latest Event:  

Forums

cs3 lancer project 2005 model

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 10:18 pm

so i planning to turbo the 4g18 engine have a few ideas of what i want to do and what parts am planning to use looking for anyone of knowledge who has done such a thing or knows anyone who has feel free to leave suggestions and advice and it a manual 5fwd

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 10:22 pm

planning on boosting on stock internals or forged out business?

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 10:25 pm

stock planning on running about 7-8 pounds of boost

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 10:30 pm

i've been thinking bout this a while now..what parts you have rite now?

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 10:32 pm

planning on upgrading injectors to the 390cc injectors from the 49g3t engine upgrading to 190lph fuel pump and looking for a fuel management system now

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 10:32 pm

thinking the apexi neo system

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 10:37 pm

sounds good..what turbo you gonna use???you got 4wheel disc brakes?dont forget a fuel pressure regulator..u building a turbo manifold locally or bringing in one?i was tinking emanage ultimate,what you have in mind?

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 10:38 pm

gonna use a tdo5h turbo and still soucing other parts but this is the direction am headin in

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 10:39 pm

what clutch and pressure plate? i'm using act h/duty pressure plate and a 'competion clutch' clutch-6puck unsprung.holds really nice

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 10:51 pm

the only thing is i might user a smaller turbo than the one previously mentioned because the turbo lag and not enough air displacement for the turbo

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 10:55 pm

oh ok..i've been researching this for a while,have alot of ideas bout it as well..you doing all this yourself?

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 11:00 pm

might use the tdo5 garret tubro smaller turbo 7-8lbs of boost better for air displacement and safer for the engine wat plans or ideas you have?

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 11:07 pm

well you got most of the stuff covered..do a good turbo manifold,wastegate,probably increase exhaust piping a lil bit..must have a good management,and i saw someone on another forum saying they used those same injectors.probably move battery to trunk for better placement of air filter maybe?also correct size intercooler,or u lookin for the sleeper look?blow off valve,a good one/brand.

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 11:27 pm

i would like the sleeper look just deciding which one would be easier in terms of installation and cost what you think intercooler or sleeper?

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 11:33 pm

i love to see the intercooler..but the front mount would get better cooling,so i would think it would be more efficient..check out the last pic on the mitsu pic page..my car is there and also a turbo cedia

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 11:34 pm

new tot his site how do i get to the mitsu page and pics? lol

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 11:37 pm

its rite below this topic

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 11:45 pm

saw the pics which car is yours?

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 11:48 pm

Image

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 6th, 2012, 11:53 pm

nice what mods have you on it so far?

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 6th, 2012, 11:58 pm

nothing much...cold air intake,17's kinda light rims,act pressure plate,competition clutch,polyurethene mounths,ralliart shift knob,accel racing spark plugs....dats what i remember off hand..what about u?

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 7th, 2012, 12:01 am

car is completely stock buying parts an resting down hows the act pressure plate and competition clutch ? how much did you pay for it ?

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 7th, 2012, 12:04 am

was about $2500 or so.got it from peak performance 693-2908..some gd ppl to deal with..you have pics of yours?

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 7th, 2012, 12:13 am

no i dont sorry it a white cs3 2005 manual 5 fwd i would try to get some pics soon for yoou what other parts do peak performance sell?

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 7th, 2012, 12:18 am

all kinda performance stuff

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 7th, 2012, 12:22 am

pricing a garret t25 turbo so if you know anyone or anywhere selling them hit me up and this turbo comes with an internal wastegate :)

User avatar
daniel135
Chronic TriniTuner
Posts: 514
Joined: November 16th, 2008, 10:13 am
Contact:

Re: cs3 lancer project 2005 model

Postby daniel135 » March 7th, 2012, 5:56 am

no prob.

User avatar
fras
Chronic 2NR
Posts: 2163
Joined: August 25th, 2005, 8:34 pm
Location: Penal

Re: cs3 lancer project 2005 model

Postby fras » March 7th, 2012, 12:38 pm

I suggest u start by upgrading ur brakes and suspension first!

A small turbo would be best for ur application (T25 or TD04)

U'll need to get a custom made turbo manifold and external wastegate... If u get a spare 4G18 manifold, turbo and wastegate so that the fabricator could build the manifold, saving u down time!
Buy the external wastegate with the desired spring pressure so wunt need a boost controller and could run straight off the wastegate pressure!

As for the piggy back I would suggest a greddy emanage... There is only so much a safc could do with a stock non-turbo ecu, I imagine it would be exhausted!

turbo_addict
Ricer
Posts: 24
Joined: March 6th, 2012, 9:35 pm

Re: cs3 lancer project 2005 model

Postby turbo_addict » March 7th, 2012, 12:51 pm

thanks for the info you know anyone who can help me with custom making these parts and anyone who could help me with this project and i want to use the stock internals so what boost you think i could run with the stock internals

User avatar
fras
Chronic 2NR
Posts: 2163
Joined: August 25th, 2005, 8:34 pm
Location: Penal

Re: cs3 lancer project 2005 model

Postby fras » March 7th, 2012, 1:29 pm

5-6psi?

I could put u onto a 2NR who would do the mechanical and tuning aspects and organize what ever fabrication necessary (manifold & intercooler piping)!

Same 2NR did Devi's turbo swift and also tunes my car :mrgreen:

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 7 guests