TriniTuner.com  |  Latest Event:  

Forums

3 12" CVM Primera build

(I.C.E.)In Car Entertainment - Mobile Audio and Video

Moderator: 3ne2nr Mods

User avatar
riadb
18 pounds of Boost
Posts: 2481
Joined: March 10th, 2006, 11:39 am
Location: Freeport, Trinidad
Contact:

3 12" CVM Primera build

Postby riadb » April 17th, 2012, 8:55 am

Vehicle - Nissan Primera P11

HU - Alpine CDA - 117
2 Clarion Crossovers
Cerwin Vega Stroker 2000.1
2 Cerwin Vega Stroker 800.4's
4 18sound 6s
2 18sound 8s
Pair of Ciare CD38T drivers an 18sound flares...

Image
framing the backdash..

Image
backdash frame complete

Image
batteries installed and wired in the wheel well

Image
entire trunk sheeted off with 3/4 mdf

Image

Image
test fitting the enclosures

Image
test fitting the amps

Image
a completed sub box

Image
test fitting the completed boxes

Image
floor boards carpeted

Image
boxes carpeted and fitted in, all wires run and ready to hook up

Image
backdash installed

Image

Image
amps installed

Image

Image

Image

Image
completed

Advertisement
User avatar
Firewall
Riding on 16's
Posts: 1165
Joined: October 29th, 2006, 8:15 am

Re: 3 12" CVM Primera build

Postby Firewall » April 17th, 2012, 9:16 am

Finally...an install in the ICE forum.

Nice work man

User avatar
MONGO
3NE 2NR Power Seller
Posts: 444
Joined: July 30th, 2009, 12:01 am
Location: carapichaima

Re: 3 12" CVM Primera build

Postby MONGO » April 17th, 2012, 9:41 am

very neat and nicely done, excellent.

User avatar
shake d livin wake d dead
TriniTuner 24-7
Posts: 11823
Joined: July 20th, 2009, 1:25 pm
Location: all over

Re: 3 12" CVM Primera build

Postby shake d livin wake d dead » April 17th, 2012, 10:05 am

no place for coolers no care,lol....nah bai....eet looking real nice,looking like it bussing ears.

User avatar
silent_riot
punchin NOS
Posts: 4305
Joined: December 26th, 2004, 11:40 pm
Location: Pumpitating
Contact:

Re: 3 12" CVM Primera build

Postby silent_riot » April 17th, 2012, 11:05 am

Trunk looks good!

jblCROWN
3NE 2NR for life
Posts: 134
Joined: June 15th, 2011, 5:38 pm

Re: 3 12" CVM Primera build

Postby jblCROWN » April 17th, 2012, 12:01 pm

wtk using deck an crossover alone

User avatar
riadb
18 pounds of Boost
Posts: 2481
Joined: March 10th, 2006, 11:39 am
Location: Freeport, Trinidad
Contact:

Re: 3 12" CVM Primera build

Postby riadb » April 17th, 2012, 12:24 pm

jblCROWN wrote:wtk using deck an crossover alone


yep.

alpine cda117 and the pair of clarion crosses.

User avatar
dballer
Ricer
Posts: 16
Joined: February 16th, 2012, 10:37 am
Location: south
Contact:

Re: 3 12" CVM Primera build

Postby dballer » April 17th, 2012, 1:18 pm

hi........i hav 2 cerwin vega Vmax ......d silver ones i cant get the specs 2 build the box anywhere can any1 help?

User avatar
dballer
Ricer
Posts: 16
Joined: February 16th, 2012, 10:37 am
Location: south
Contact:

Re: 3 12" CVM Primera build

Postby dballer » April 17th, 2012, 1:19 pm

or would any new cerwin vega box work ?

User avatar
riadb
18 pounds of Boost
Posts: 2481
Joined: March 10th, 2006, 11:39 am
Location: Freeport, Trinidad
Contact:

Re: 3 12" CVM Primera build

Postby riadb » April 17th, 2012, 6:11 pm

i can do the boxes for you. i have access to enclosure plans for most of the CV products.

User avatar
MonsterPower
punchin NOS
Posts: 2960
Joined: November 22nd, 2005, 4:07 pm
Location: On top the central range

Re: 3 12" CVM Primera build

Postby MonsterPower » April 17th, 2012, 7:29 pm

riad why did u need 2 x-over?? what amp config did u use for the mids?

User avatar
riadb
18 pounds of Boost
Posts: 2481
Joined: March 10th, 2006, 11:39 am
Location: Freeport, Trinidad
Contact:

Re: 3 12" CVM Primera build

Postby riadb » April 17th, 2012, 8:53 pm

there is a mono and a pair of 4 channels..

crossover configuration is as follows.

sub out - bass amp

the other 4 high passes go to the..
1) driver units
2) 8" in backdash
3) 6" in backdash
4) 6" in front doors.

there is a crossover control for each set of speakers.

addicted.1
Street 2NR
Posts: 33
Joined: June 4th, 2011, 11:01 pm

Re: 3 12" CVM Primera build

Postby addicted.1 » April 17th, 2012, 9:05 pm

great build...

User avatar
BrotherHood
3NE 2NR Power Seller
Posts: 8050
Joined: October 20th, 2010, 2:41 pm
Location: Bringing HID & LED to a location near you! 355-3165

Re: 3 12" CVM Primera build

Postby BrotherHood » April 17th, 2012, 11:59 pm

Clean and well presented. Nice job here man.

User avatar
ruff neck chicken
Chronic TriniTuner
Posts: 696
Joined: July 19th, 2007, 2:12 pm
Location: Behind a desk

Re: 3 12" CVM Primera build

Postby ruff neck chicken » April 18th, 2012, 8:26 am

riadb wrote:there is a mono and a pair of 4 channels..

crossover configuration is as follows.

sub out - bass amp

the other 4 high passes go to the..
1) driver units
2) 8" in backdash
3) 6" in backdash
4) 6" in front doors.

there is a crossover control for each set of speakers.


Noob time now :oops:

was that necessary?
couldnt one piece of equipment be used, either the same or another?

trent george
Street 2NR
Posts: 58
Joined: February 14th, 2012, 7:52 am

Re: 3 12" CVM Primera build

Postby trent george » April 18th, 2012, 8:30 am

hey man nice work just curious a bit how did u wire ur mids to the amp
4 6 0n 1 amp and 2 8 an 2 drivers on the next

wanted
Street 2NR
Posts: 86
Joined: June 12th, 2011, 12:39 am

Re: 3 12" CVM Primera build

Postby wanted » April 18th, 2012, 10:26 am

Just curious, was the pics of the crossover taken before the final tuning cus both high pass looks the same on the crossovers.

User avatar
dballer
Ricer
Posts: 16
Joined: February 16th, 2012, 10:37 am
Location: south
Contact:

Re: 3 12" CVM Primera build

Postby dballer » April 18th, 2012, 11:30 am

riadb wrote:i can do the boxes for you. i have access to enclosure plans for most of the CV products.


and what would the aprox price be?

User avatar
ruffnek
Trinituner Peong
Posts: 461
Joined: January 14th, 2005, 11:24 am
Location: Bumper 2 Bumper

Re: 3 12" CVM Primera build

Postby ruffnek » April 18th, 2012, 3:27 pm

Have a quick question....
so the top of the backdash open with fabric over? or fiberglassed?
and doe these batteries need to be vented or no?
just asking...sometime i would try to do something like this

User avatar
riadb
18 pounds of Boost
Posts: 2481
Joined: March 10th, 2006, 11:39 am
Location: Freeport, Trinidad
Contact:

Re: 3 12" CVM Primera build

Postby riadb » April 18th, 2012, 6:02 pm

ruff neck chicken wrote:
Noob time now :oops:

was that necessary?
couldnt one piece of equipment be used, either the same or another?


he had a clarion cross already so it was much easier and cheaper to get another one.

If one crossover was used we would have had to use one of the outputs for the drivers and the other output for the 8's and 4 6's. Thats why I put 2 crossovers.

trent george wrote:hey man nice work just curious a bit how did u wire ur mids to the amp
4 6 0n 1 amp and 2 8 an 2 drivers on the next


yes, just like that.
wanted wrote:Just curious, was the pics of the crossover taken before the final tuning cus both high pass looks the same on the crossovers.


nah the crossovers have been adjusted, i just had them on the same thing when i was testing everything.

dballer wrote:and what would the aprox price be?


for a double 12" - $900

ruffnek wrote:Have a quick question....
so the top of the backdash open with fabric over? or fiberglassed?
and doe these batteries need to be vented or no?
just asking...sometime i would try to do something like this


the backdash has been fiberglassed, i didnt have any pics of that. The batts are vented at the bottom of the vehicle through a trunk flap.

User avatar
MonsterPower
punchin NOS
Posts: 2960
Joined: November 22nd, 2005, 4:07 pm
Location: On top the central range

Re: 3 12" CVM Primera build

Postby MonsterPower » April 18th, 2012, 9:39 pm

nice build man .... i real liking the sub triangle design... saves space

User avatar
riadb
18 pounds of Boost
Posts: 2481
Joined: March 10th, 2006, 11:39 am
Location: Freeport, Trinidad
Contact:

Re: 3 12" CVM Primera build

Postby riadb » April 19th, 2012, 10:11 am

thanks man

noelsook
Street 2NR
Posts: 76
Joined: August 15th, 2010, 4:00 pm
Location: Guyana
Contact:

Re: 3 12" CVM Primera build

Postby noelsook » April 19th, 2012, 3:03 pm

Yo Boss, de install clean man.....awesome!

User avatar
matthewmazda
Riding on 18's
Posts: 1662
Joined: May 15th, 2009, 1:02 am
Location: Arouca to Arima
Contact:

Re: 3 12" CVM Primera build

Postby matthewmazda » April 19th, 2012, 4:29 pm

nice stock install man

User avatar
dballer
Ricer
Posts: 16
Joined: February 16th, 2012, 10:37 am
Location: south
Contact:

Re: 3 12" CVM Primera build

Postby dballer » April 19th, 2012, 8:31 pm

pm me som contact info

User avatar
ChristianRD
3NE2NR is my LIFE
Posts: 739
Joined: July 18th, 2007, 9:32 pm

Re: 3 12" CVM Primera build

Postby ChristianRD » April 20th, 2012, 12:23 am

^^^ check riadb's signature.

User avatar
3stagevtec
TriniTuner 24-7
Posts: 9617
Joined: July 12th, 2006, 1:57 pm
Location: killing two stones with one bird...
Contact:

Re: 3 12" CVM Primera build

Postby 3stagevtec » April 20th, 2012, 1:29 am

Nice build!

User avatar
dballer
Ricer
Posts: 16
Joined: February 16th, 2012, 10:37 am
Location: south
Contact:

Re: 3 12" CVM Primera build

Postby dballer » April 20th, 2012, 9:41 am

ohhhhh tnks ChristianRD

User avatar
riadb
18 pounds of Boost
Posts: 2481
Joined: March 10th, 2006, 11:39 am
Location: Freeport, Trinidad
Contact:

Re: 3 12" CVM Primera build

Postby riadb » April 23rd, 2012, 9:46 am

Extreme Audio & Performance 7388547

User avatar
black start
TriniTuner 24-7
Posts: 7779
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: 3 12" CVM Primera build

Postby black start » April 23rd, 2012, 11:06 am

nice build riadb. But what of the spare tyre?lol

Advertisement

Return to “I.C.E. / Car Audio Tech”

Who is online

Users browsing this forum: No registered users and 1 guest