Hubcentric adapters, spacers, bolts etc.

[cqk4]

Hi Guys,

I have a problem, I fitted some rims to my euro (MK5 jetta) and 4 of the 5 holes match up exactly. The last one is a bit off but the bolt can go in but its holding on to the thread. I believe this is the cause of the vibration, shimmy etc I am experiencing.

Reading up a bit I think one of the above things in the subject might solve the issue, anyone have experience with hubcentric adapters or spacers etc ?

The car is supposed to use 5 x 112mm bolt pattern but the after market rims I bought even though they have that pattern it does not fit properly. Also the center of the rim does not rest on the wheel hub so an adapter will be needed for that. Help, advice welcomed.

Thanks.

[Sundar]

http://www.rims-n-tires.com/rt_specs.jsp
dude c if this helps?

[ng357]

check racetrack wheels, they will best advise u

[cqk4]

Checked a couple folks..

Mag Wheel Center in South gave me some good advice that I am looking into.

[Corneliatmc]

ice box sdio 802.11 memory canon telephoto lense canon 8x23a dlp tv lamp residential contracting wood corbels theme chess set vibram australia
ルブタン 通販
blooms aa292 omens of war davis weather stations the krew vibram five australia
saddle bags exercise the dice man reflecting telescopes free christian mp3s kindergarten learning centers dp g321 hp nc8430 turtle beach riviera rain barrels seattle odissey