lf someone who could wire up this engine

[treav316]

i am swap out a kfze and putting in mazda fsde engine
this is a picture of what the engine looks like

[treav316]

bump!!!!!!!!!!

[treav316]

bump!!!!!!!!!!!!!!!1

[smallz]

pm maztune

[nareshseep]

whats wrong with the kfze?

Did your kfze run on super or was premium needed?

the fsde output less power than the kfze

[treav316]

kfze engine idle's at 1200rpm while driving the car the rpm go up 3000rpm and don't come down back
the transmission not moving in reverse you have to keep playing with the gas after a while it will kick in
in drive work's good just the high rpm don't like that have to keep my foot on the brakes many times
when coming to a stop because the car pushing forward just put the fsde engine because it's 2002 engine

[nareshseep]

kfze engine idle's at 1200rpm while driving the car the rpm go up 3000rpm and don't come down back
the transmission not moving in reverse you have to keep playing with the gas after a while it will kick in
in drive work's good just the high rpm don't like that have to keep my foot on the brakes many times
when coming to a stop because the car pushing forward just put the fsde engine because it's 2002 engine

Padnah daiz a tranny issue bai

A FS is more or less plug and play in a Mazda BJ.
I am not too sure your gauges will work in your car though. You will be able to install, the mounts are the same, should be no problem to wire and drive.

[treav316]

the transmission costing 4000 by the mazdaman
in the bamboo people don't want to sell the transmission alone
they selling engine and transmission togather
i got this fs from bick's in penal for 5000
engine and transmission computer all the mount
i used the v6 axle on the fs
only thing not working in the car is the speedometer gauge the one that tell the miles per hour and
the o/d
the rpm one working

[treav316]

bump!!!!!!!!!!!!!!!!!!!!!
still looking

[nareshseep]

try Maztune

[FullStop]

the fs tranny will work on the kf not so?

[treav316]

still looking