TriniTuner.com  |  Latest Event:  

Forums

VQ boys......parts, problems, upgrades, swaps, boost

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

User avatar
stingray316
3NE 2NR for life
Posts: 198
Joined: April 16th, 2005, 6:31 pm
Location: Looking for the next challange.
Contact:

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby stingray316 » August 20th, 2013, 9:24 pm

Selling my VQ30DET +TRANNY +HARNESS, changed my project since I can't get a gb at a reasonable price...
12K...

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11399
Joined: March 30th, 2010, 8:58 pm

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby Ted_v2 » November 23rd, 2013, 7:48 am

a brain and harness wont cause a radiator to burst, It will prevent it from starting. I suggest you get another mechanic to take a look at the car.

bhishamseenath
Street 2NR
Posts: 33
Joined: October 19th, 2009, 8:55 pm
Location: Chaguanas
Contact:

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby bhishamseenath » December 19th, 2013, 7:30 pm

need advise on turbo charging up a 2006 teana 230jm

prav92
Street 2NR
Posts: 61
Joined: January 24th, 2010, 3:45 pm

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby prav92 » February 9th, 2014, 11:42 am

guys i want to change my plugs on my vq35....where you all get them? motorist said is 375 per plug..... also what would you all recommend ?

lowrider
Riding on 13's
Posts: 1
Joined: June 24th, 2005, 4:03 pm

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby lowrider » June 1st, 2014, 2:51 pm

hi can some 1 help me.. i got a vq23 in a teana but every time i start the car when the engine is cool it starts smoking. and then every 4 dayz i have to top up the oil. can some 1 give me any advice

User avatar
skett
Riding on 13's
Posts: 14
Joined: October 6th, 2004, 6:07 pm
Location: central

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby skett » August 17th, 2014, 10:29 am

Morning Guys ,
I am having a little trouble with my VQ 23 for my Teana, I am hearing a whinning \whistling noise between the speeds of 40-70 km\h. the noise is intermittent and only happens when i am mashing the accelerator. I have tried changing the belts, idler pulley. checked for belt deflection. I have also removed the belts and spin the PS pump, alternator, A/C compressor by hand looking for a hard spot. All to no avail. It only happens when the engine is under load.

Any suggestions as to what i can check again is welcome. I will start to lose my hair just now if i cant figure out this problem

User avatar
stingray316
3NE 2NR for life
Posts: 198
Joined: April 16th, 2005, 6:31 pm
Location: Looking for the next challange.
Contact:

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby stingray316 » January 12th, 2015, 8:45 am

Folks, i've decided against selling my VQ30DET and I want to put it back together. I need the brackets from the front to hook back up my accessories. It was removed to check the timing chain and misplaced. Think the VQ20/25 might be the same. Here is a pic of what mines used to look.like.
Attachments
1421066707859.jpg

User avatar
stingray316
3NE 2NR for life
Posts: 198
Joined: April 16th, 2005, 6:31 pm
Location: Looking for the next challange.
Contact:

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby stingray316 » February 10th, 2015, 12:57 pm

Looking for a Flywheel for the above engine, think the VQ25 one will work also...

User avatar
stingray316
3NE 2NR for life
Posts: 198
Joined: April 16th, 2005, 6:31 pm
Location: Looking for the next challange.
Contact:

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby stingray316 » February 10th, 2015, 1:01 pm

lowrider wrote:hi can some 1 help me.. i got a vq23 in a teana but every time i start the car when the engine is cool it starts smoking. and then every 4 dayz i have to top up the oil. can some 1 give me any advice


White smoke and burning oil. You need to get that checked immediate.
Worst case scenario - head cracked and oil seeping into the cylinders.
Not so bad - Rings are gone and you need to change them and machine the cylinders.

User avatar
ruffnexz
Riding on 13's
Posts: 14
Joined: December 10th, 2007, 10:56 am
Location: South

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby ruffnexz » February 27th, 2015, 10:31 am

Good day folks, I'm looking for a VQ23 ecu/ecm for J31, if know anyone that has one.

User avatar
wagonon20's
Chronic TriniTuner
Posts: 556
Joined: July 17th, 2009, 9:47 am

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby wagonon20's » December 20th, 2015, 8:06 am

lowrider wrote:hi can some 1 help me.. i got a vq23 in a teana but every time i start the car when the engine is cool it starts smoking. and then every 4 dayz i have to top up the oil. can some 1 give me any advice
I am having d same problem for a month now can't seem to put my finger on it , I scanned my car on diagnostic scanner and it said the tps sensor needs changing does this affect the engine causing it to smoke when starting up???

User avatar
racedriverpro
punchin NOS
Posts: 3265
Joined: September 12th, 2012, 1:12 pm

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby racedriverpro » February 27th, 2016, 2:39 pm

Isn't that symptom related to bad valve stem seals?

Sent from my C6603 using Tapatalk

User avatar
supercharged turbo
punchin NOS
Posts: 3668
Joined: January 19th, 2011, 6:53 pm
Location: turn around

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby supercharged turbo » July 25th, 2016, 2:58 pm

Where I could get a VQ23 head and block?

badboydhanesh
Riding on 13's
Posts: 2
Joined: July 11th, 2009, 5:10 pm

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby badboydhanesh » July 30th, 2017, 6:57 pm

What can I do to make my teana j31 VQ23 respond more aggressively like a turbo charged vehicle.

User avatar
stingray316
3NE 2NR for life
Posts: 198
Joined: April 16th, 2005, 6:31 pm
Location: Looking for the next challange.
Contact:

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby stingray316 » August 26th, 2017, 10:27 pm

wagonon20's wrote:
lowrider wrote:hi can some 1 help me.. i got a vq23 in a teana but every time i start the car when the engine is cool it starts smoking. and then every 4 dayz i have to top up the oil. can some 1 give me any advice
I am having d same problem for a month now can't seem to put my finger on it , I scanned my car on diagnostic scanner and it said the tps sensor needs changing does this affect the engine causing it to smoke when starting up???


Change the oil and use an engine flush, put a thicker body oil.

User avatar
stingray316
3NE 2NR for life
Posts: 198
Joined: April 16th, 2005, 6:31 pm
Location: Looking for the next challange.
Contact:

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby stingray316 » August 26th, 2017, 10:29 pm

stingray316 wrote:Looking for a Flywheel for the above engine, think the VQ25 one will work also...


I still looking for this. Or a 300zx flywheel.

User avatar
nivek
Sweet on this forum
Posts: 386
Joined: March 11th, 2008, 2:31 pm

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby nivek » October 30th, 2017, 11:46 pm

Will the a33 seats.front and back line up properly in the a32?

Lyndon121
Riding on 13's
Posts: 1
Joined: March 8th, 2022, 2:09 pm

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby Lyndon121 » March 12th, 2022, 8:48 pm

Anybody know where to get a VQ35 transmission

User avatar
GTRacing
Riding on 13's
Posts: 3
Joined: April 13th, 2008, 12:15 am

Re: VQ boys......parts, problems, upgrades, swaps, boost

Postby GTRacing » June 29th, 2022, 11:20 pm

Looking for a vq35 clutch fan 7023778

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 8 guests