Moderator: 3ne2nr Mods
Freak wrote:So i bought some 10mm spacers with extended bolts for my Audi S5. The spacers dont work for me as i have upgraded to 20 inch wheels. I contacted ECS who said these spacers are for OEM size wheels and in most occasions they dont work for bigger wheels.
I paid US170for the spacers and the extended nuts and a further US120 to ship and clear.
F.S. 10mm ECS Tuning spacers for Audi
Will sell for tt600 a pair with the extended wheels nuts to go with it. Ideal for folks who want to bring out there oem wheels for a staggered look just in the rear or right around.
To be clear the spacers have only been mounted and tested not more than 10km on them.
http://www.ecstuning.com/Audi-B8_S5-Qua ... ES2603073/
6895427
dclone_1 wrote:Freak wrote:So i bought some 10mm spacers with extended bolts for my Audi S5. The spacers dont work for me as i have upgraded to 20 inch wheels. I contacted ECS who said these spacers are for OEM size wheels and in most occasions they dont work for bigger wheels.
I paid US170for the spacers and the extended nuts and a further US120 to ship and clear.
F.S. 10mm ECS Tuning spacers for Audi
Will sell for tt600 a pair with the extended wheels nuts to go with it. Ideal for folks who want to bring out there oem wheels for a staggered look just in the rear or right around.
To be clear the spacers have only been mounted and tested not more than 10km on them.
http://www.ecstuning.com/Audi-B8_S5-Qua ... ES2603073/
6895427
Whats the bolt pattern of the spacers. I have a bore thats why I'm asking
Bolt pattern was 5 x 112.
As they did not work on my car and noone was interested, i returned them to the company for a full refund.
From my experience i would stick to H&R spacers.
Sent from my GT-N7100 using Tapatalk
BANzai Rastafarai wrote:hmmm thats interesting tho Freak.. i have that kit on the Ordi14...10mm..and i run 19 inchers.... is it that the 20 inchers is the issue? or the rim type?...
Allergic2BunnyEars wrote:How is your ride quality now over bumps and ruts?
Freak wrote:BANzai Rastafarai wrote:hmmm thats interesting tho Freak.. i have that kit on the Ordi14...10mm..and i run 19 inchers.... is it that the 20 inchers is the issue? or the rim type?...
BANzai i believe its the rim and size. From speaking to the ECS rep the size of the rim 20x10.5 needs a flat surface to lay on. If you ever looked at the 10mm spacer, there is a slight bezel, kinda rounded edge between the base and the hubcentric lip. This bezel wasnt allowing the vossens to fit snug. ECS said this bezel is very minimum in the 15mm spacers and i should go with that. I eventually took the advice of other people on the forum and went with H and R, as their 15mm has no bezel at all and it works great, no shim or shake at any speed.
BANzai Rastafarai wrote:Freak wrote:BANzai Rastafarai wrote:hmmm thats interesting tho Freak.. i have that kit on the Ordi14...10mm..and i run 19 inchers.... is it that the 20 inchers is the issue? or the rim type?...
BANzai i believe its the rim and size. From speaking to the ECS rep the size of the rim 20x10.5 needs a flat surface to lay on. If you ever looked at the 10mm spacer, there is a slight bezel, kinda rounded edge between the base and the hubcentric lip. This bezel wasnt allowing the vossens to fit snug. ECS said this bezel is very minimum in the 15mm spacers and i should go with that. I eventually took the advice of other people on the forum and went with H and R, as their 15mm has no bezel at all and it works great, no shim or shake at any speed.
good stuff. I have zero shim or shake with the ECS units... the Bezel i guess helps with proper fitting. but thanks for the heads up as i am looking at some 20's. I'll have to investiquire some more.
You on Audizine?
stylez1234 wrote:Lookin for a 99 Passat b5 front grill... If n e one has info where I can locate one wud b appreciated pm me thnx
pm sentrabidcongoman wrote:
japs wrote:HIGH PERFORMANCE K&N FILTERS
FRONT SHOCKS - A4 AND A6
REAR SHOCKS - A4 AND A6
BONNET SHOCKS
DIPSTICKS AND HOUSING
EXPANSION TANK AND COVER
COMPLETE THERMOSTAT HOUSING
CRANKCASE BREATHER PIPES
FUEL PUMPS
WATER PUMPS
PLUGS
RACK ENDS
COIL PACKS
DISC PADS - FRONT AND REAR
ENGINES
HEAD KITS
TIMING BELT KITS
HEAD GASKET
TRANSMISSIONS
ECU'S
BODY PARTSMORE PARTS BACK IN STOCK:
TRANSMISSION OIL
PCV VALVE
COOLANT TEMPERATURE SENSOR
OIL FILTERS
STEERING RACK ENDS
LOWER CONTROL ARMS
UPPER CONTROL ARMS
THROTTLE BODY
AIR FLOW SENSOR
FUEL FILTER
AC COMPRESSOR
CONTACT:355-0695/355-0697
Users browsing this forum: No registered users and 12 guests