TriniTuner.com  |  Latest Event:  

Forums

Mazda Mechanic!!

MAZDA People United - it continues here

Moderator: 3ne2nr Mods

User avatar
Groovemaster
3NE2NR is my LIFE
Posts: 848
Joined: November 14th, 2005, 2:47 pm

Re: Mazda Mechanic!!

Postby Groovemaster » April 18th, 2012, 7:38 pm

toiz29 wrote:I have a bj 2001 singapore, all the shocks were changed, the bearings were changed, engine mounts were changed, but there is a humming sound that sounds like bearings especially when going down an incline. What could be the cause of this?


I had a tyre that was "cupping" that sounded like bad bearings!

Spirit R
Street 2NR
Posts: 32
Joined: June 19th, 2005, 7:42 pm

Re: Mazda Mechanic!!

Postby Spirit R » April 20th, 2012, 7:43 am

lazytrini wrote:Hey guys, hoping someone can help. My driver's door in my M3 won't open. It just stopped randomly one morning and won't respond to alarm-remote or key. Two straighteners opened it up from the inside and gave up because the lock is encased in something they can't reach. A couple of alarm installers told me they couldn't help either. Anyone had this problem and/or can recommend someone who might be able to help with the problem? Thanks in advance.



Had this problem with my Mazda 6. Had to buy the entire lock/actuator assembly from Southern Sales and I carried it by my straightner to change it.
He does work for Southern Sales so he has experience with these things.
Glenn 777-4221, located in Claxton Bay.

lazytrini
Riding on 13's
Posts: 11
Joined: August 16th, 2011, 10:06 pm

Re: Mazda Mechanic!!

Postby lazytrini » April 21st, 2012, 11:22 am

Thanks man, I'll give him a call.

User avatar
Computerman
Riding on 18's
Posts: 1890
Joined: April 23rd, 2005, 6:32 pm
Location: Behind the Camera
Contact:

Re: Mazda Mechanic!!

Postby Computerman » April 22nd, 2012, 9:55 am

Spirit R wrote:Had to buy the entire lock/actuator assembly....
This is a common problem in newer vehicles. I had to replace a few already.

ridumrider
Riding on 13's
Posts: 10
Joined: August 26th, 2012, 7:34 pm

Re: Mazda Mechanic!!

Postby ridumrider » September 9th, 2012, 5:39 pm

In need of a mech a good mazda mech

S_2NR
TriniTuner 24-7
Posts: 13305
Joined: May 22nd, 2010, 8:11 pm

Re: Mazda Mechanic!!

Postby S_2NR » September 16th, 2012, 10:22 pm

where u located? ^

ridumrider
Riding on 13's
Posts: 10
Joined: August 26th, 2012, 7:34 pm

Re: Mazda Mechanic!!

Postby ridumrider » September 16th, 2012, 11:07 pm

@S_2NR
the Heart of San Juan

S_2NR
TriniTuner 24-7
Posts: 13305
Joined: May 22nd, 2010, 8:11 pm

Re: Mazda Mechanic!!

Postby S_2NR » September 17th, 2012, 12:06 am

I could vouch for David in central. He works on our Mazda 3. Located on chase village main road. By Sonny's auto parts. He works by appointment.

ridumrider
Riding on 13's
Posts: 10
Joined: August 26th, 2012, 7:34 pm

Re: Mazda Mechanic!!

Postby ridumrider » September 25th, 2012, 12:40 am

Dose he do house calls becase this lantis not moving, trying my best to start it but no dice, someone said the airflow sensor is faulty so it will not start without it (is that true?)need some help here guys

User avatar
Computerman
Riding on 18's
Posts: 1890
Joined: April 23rd, 2005, 6:32 pm
Location: Behind the Camera
Contact:

Re: Mazda Mechanic!!

Postby Computerman » December 24th, 2012, 11:31 am

State of the Art Automotive - 222-0183

User avatar
speedist
Shifting into 6th
Posts: 2110
Joined: December 6th, 2009, 5:45 pm
Location: Battling to finish the project...........

Re: Mazda Mechanic!!

Postby speedist » May 10th, 2013, 7:06 pm

Looking for a mech to come inspect 2 mazda 3's I want to purchase.

atomictt
Ricer
Posts: 17
Joined: June 16th, 2013, 9:02 pm

Re: Mazda Mechanic!!

Postby atomictt » June 30th, 2013, 11:45 pm

need a good mazda mech /auto elec for 323F BH. changed damaged b6 engine to z5. seems like the last mech do not know what he's doing, car not moving. suggestions please

User avatar
rideordie2448
Riding on 13's
Posts: 7
Joined: November 18th, 2005, 9:58 am
Location: south

Re: Mazda Mechanic!!

Postby rideordie2448 » July 19th, 2013, 6:30 pm

Looking for a good mazda auto/electro to wire up my fs in my bj asap!any suggestions call 331 7440

apachesello
Riding on 13's
Posts: 8
Joined: June 21st, 2012, 11:53 am

Re: Mazda Mechanic!!

Postby apachesello » September 8th, 2013, 9:57 am

Looking for an Alternator for a 2006 Mazda Axela 3 sedan. Tried the whole of Bamboo in vain.
The tag on the alternator shows a very small drawing of the electrical socket with P and D written in it.

The tag also has:
Z J 10 B and
A3TG2881A
12V 90A 6627

written on it. The tag is located just above the socket on the alternator.

The socket has TWO (2) pins
and the alternator has a clutch pulley

Please call me at 687-4976 if you have any info.

User avatar
keronp
Riding on 13's
Posts: 2
Joined: July 30th, 2014, 10:53 am

Re: Mazda Mechanic!!

Postby keronp » July 30th, 2014, 1:14 pm

Wildcard26 wrote:The Mazda BJ mechanic is Nazim, ********. I don't know what other models he does work on but I am sure he does. From what I have heard most of the Sport20 guys do work by him.



yea. pm me his details also plz. hav sum work to do on a 323 bj

lostboys crew
3NE2NR is my LIFE
Posts: 867
Joined: December 28th, 2008, 9:14 am
Location: Somewhere round de place

Re: Mazda Mechanic!!

Postby lostboys crew » September 10th, 2014, 5:52 pm

Hey guy's, wanna know if the Z5 head and block can bolt up to the B6D engine.

User avatar
cinco
TriniTuner 24-7
Posts: 18211
Joined: January 6th, 2006, 3:21 pm
Location: Does this rag smell like chloroform to you?
Contact:

Re: Mazda Mechanic!!

Postby cinco » September 12th, 2014, 2:29 pm

no it cant

lostboys crew
3NE2NR is my LIFE
Posts: 867
Joined: December 28th, 2008, 9:14 am
Location: Somewhere round de place

Re: Mazda Mechanic!!

Postby lostboys crew » September 12th, 2014, 5:48 pm

^^^^
Oh yeah... what i meant was the Z5 engine block itself onto the B6 head.

User avatar
cinco
TriniTuner 24-7
Posts: 18211
Joined: January 6th, 2006, 3:21 pm
Location: Does this rag smell like chloroform to you?
Contact:

Re: Mazda Mechanic!!

Postby cinco » September 12th, 2014, 6:14 pm

No it cant

lostboys crew
3NE2NR is my LIFE
Posts: 867
Joined: December 28th, 2008, 9:14 am
Location: Somewhere round de place

Re: Mazda Mechanic!!

Postby lostboys crew » September 12th, 2014, 6:32 pm

You sure bro ? been doing some research and lots of Mazda men have done this bulid, even with turbo applications.

So you pretty sure cinco ? cause i need a block for my car and lots of men saying the z5 block can work.

http://www.mazda3club.com/showthread.php?t=34811
http://www.clubprotege.com/forum/showthread.php?20380-Z5-B6-turbo

Image

User avatar
cinco
TriniTuner 24-7
Posts: 18211
Joined: January 6th, 2006, 3:21 pm
Location: Does this rag smell like chloroform to you?
Contact:

Re: Mazda Mechanic!!

Postby cinco » September 12th, 2014, 6:43 pm

It requires some custom work. Why wouldnt you just swap to a z5(

bluespeed68
Riding on 13's
Posts: 1
Joined: December 12th, 2015, 10:41 am

Re: Mazda Mechanic!!

Postby bluespeed68 » December 12th, 2015, 10:49 am

I have mazda 6 2003 model only getting a fault code p0403,exhaust gas recirculation control circuit can anyone give me advice???

User avatar
Wildcard26
Riding on 16's
Posts: 1122
Joined: January 14th, 2009, 8:29 pm

Re: Mazda Mechanic!!

Postby Wildcard26 » December 12th, 2015, 7:23 pm

bluespeed68 wrote:I have mazda 6 2003 model only getting a fault code p0403,exhaust gas recirculation control circuit can anyone give me advice???


See if this helps to narrow it down.

http://www.obd-codes.com/p0403

originalbling
Chronic TriniTuner
Posts: 554
Joined: September 27th, 2004, 10:26 am
Contact:

Re: Mazda Mechanic!!

Postby originalbling » December 16th, 2015, 10:38 am

have that same issue on a mazda 3. Had a mech remove and clean the EGR valve but CEL showed up a few weeks after.

havent found a new OEM replacement part online yet.

User avatar
FullStop
punchin NOS
Posts: 3198
Joined: August 11th, 2007, 8:47 pm

Re: Mazda Mechanic!!

Postby FullStop » December 22nd, 2015, 1:55 pm

Highly recommend servicing the egr and injectors together on this car, also get a diagnostic done to make sure that O2 sensor is fine. Consider engine decarbonizing as well.

cphider
Street 2NR
Posts: 31
Joined: November 20th, 2008, 12:30 pm

Re: Mazda Mechanic!!

Postby cphider » June 17th, 2016, 10:17 am

Hey guys/girls I have a mazda 6 2003 I believe that won't start. Been through 2 mechanics and they can't find the problem. One mentioned it may be built in immobiliser malfunctioning. I need someone with experience to take a look any recommendations?

359 0443 whatsapp if you want to pm.

cphider
Street 2NR
Posts: 31
Joined: November 20th, 2008, 12:30 pm

Re: Mazda Mechanic!!

Postby cphider » February 15th, 2017, 10:48 am

So reporting this as the problem has re-occurred and I've lost the number for the guy that assisted me from here.

Hey guys/girls I have a mazda 6 2003 I believe that won't start. Been through 2 mechanics and they can't find the problem. One mentioned it may be built in immobiliser malfunctioning. I need someone with experience to take a look any recommendations?

359 0443 whatsapp if you want to pm.

trini iceman
Trinituner Peong
Posts: 461
Joined: January 12th, 2013, 1:14 pm

Re: Mazda Mechanic!!

Postby trini iceman » February 15th, 2017, 11:57 am

cphider wrote:So reporting this as the problem has re-occurred and I've lost the number for the guy that assisted me from here.

Hey guys/girls I have a mazda 6 2003 I believe that won't start. Been through 2 mechanics and they can't find the problem. One mentioned it may be built in immobiliser malfunctioning. I need someone with experience to take a look any recommendations?

359 0443 whatsapp if you want to pm.


You can get me @3981404 to sort this.

T27
Street 2NR
Posts: 47
Joined: August 18th, 2011, 11:27 pm

Re: Mazda Mechanic!!

Postby T27 » February 24th, 2017, 4:18 am

my mazda 3 2010 model is cutting of on the first start and starts back normal on second start this happened after I I cleaned the throttle body please help me out I changed plugs oil filter use liquid moly injector cleaner to put in gas tank

trini iceman
Trinituner Peong
Posts: 461
Joined: January 12th, 2013, 1:14 pm

Re: Mazda Mechanic!!

Postby trini iceman » February 24th, 2017, 10:18 am

T27 wrote:my mazda 3 2010 model is cutting of on the first start and starts back normal on second start this happened after I I cleaned the throttle body please help me out I changed plugs oil filter use liquid moly injector cleaner to put in gas tank


You can get us @3981404

Advertisement

Return to “MAZDA”

Who is online

Users browsing this forum: No registered users and 2 guests