TriniTuner.com  |  Latest Event:  

Forums

CK lancers Part Numbers

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

Javedali
Ricer
Posts: 28
Joined: November 19th, 2008, 9:52 pm

Re: CK lancers Part Numbers

Postby Javedali » March 12th, 2017, 12:42 pm

What does a fuel pump blinking and service required mean on my 2007 local lancer mean

User avatar
Kronik
18 pounds of Boost
Posts: 2446
Joined: July 23rd, 2004, 9:37 pm
Location: Central
Contact:

Re: CK lancers Part Numbers

Postby Kronik » March 14th, 2017, 8:02 am

Morpheus wrote:
Kronik wrote:Who have ASA up and running, want the part number for the clock spring for the local CS3

Check MISHI...

End up installing it back and getting the number

Kerdel767
Riding on 13's
Posts: 1
Joined: May 8th, 2017, 6:13 am

Re: CK lancers Part Numbers

Postby Kerdel767 » May 8th, 2017, 6:15 am

Hi all
Looking for intake an exhaust valves for a ck2a lancer
4g15 DOHC
Impossible to get these kinda things in Dominica...

User avatar
Mercenary
Riding on 18's
Posts: 1856
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » June 27th, 2017, 2:06 pm

needed part numbers for oil pump and oil pump seal for Local Ck4 2000 4G92 Sohc. I changed oil pan, changed cam and crank seals and there is still an annoying oil leak. Upon inspection I deduce it leaking from the 'upper' oil pan. thanks for any assistance I get fellas.

Keon24
Riding on 13's
Posts: 5
Joined: December 30th, 2011, 12:16 pm

Re: CK lancers Part Numbers

Postby Keon24 » August 21st, 2017, 7:06 am

Kudos to the creators of this thread and all who contributed, really saved my skin trying to find parts.

I have a libero with a 4G15 engine, everything stock. Recently changed brakes and rotors but noticed it only had two of the shim plates and missing a few of the retaining clips. so anyone know where i can get shim kit wagner f130925 or the shims and clips in general?

User avatar
Morpheus
TriniTuner 24-7
Posts: 10729
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » August 25th, 2017, 11:21 am

Mercenary wrote:needed part numbers for oil pump and oil pump seal for Local Ck4 2000 4G92 Sohc. I changed oil pan, changed cam and crank seals and there is still an annoying oil leak. Upon inspection I deduce it leaking from the 'upper' oil pan. thanks for any assistance I get fellas.


As far as I know, both upper and lower oil pan use just gasket maker.

Capture.JPG

User avatar
Mercenary
Riding on 18's
Posts: 1856
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » August 25th, 2017, 1:07 pm

Thanks Morpheus...now to find a competent mechanic to handle that for me. the upper pan in mines does leak intermittently.... :shock: :x

User avatar
Morpheus
TriniTuner 24-7
Posts: 10729
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » August 27th, 2017, 9:27 pm

BTW those local crank seals (most likely the cams too) don't fit properly so they tend to leak. I changed mine twice and then ordered in an original and the difference in even installing it was tremendous.
Let's just say it didn't just slide in by hand like the local, non-original ones.

User avatar
Mercenary
Riding on 18's
Posts: 1856
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » August 27th, 2017, 10:11 pm

Morpheus wrote:BTW those local crank seals (most likely the cams too) don't fit properly so they tend to leak. I changed mine twice and then ordered in an original and the difference in even installing it was tremendous.
Let's just say it didn't just slide in by hand like the local, non-original ones.



Yeah learned my lesson twice with cheap seals (local) lol. I using the car as is until i can swap it for a 93 sohc.

User avatar
trent
Riding on 17's
Posts: 1555
Joined: May 27th, 2010, 1:18 pm

Re: CK lancers Part Numbers

Postby trent » October 25th, 2017, 2:11 pm

Morpheus wrote:BTW those local crank seals (most likely the cams too) don't fit properly so they tend to leak. I changed mine twice and then ordered in an original and the difference in even installing it was tremendous.
Let's just say it didn't just slide in by hand like the local, non-original ones.


What are the OEM part numbers for the CK 4G92 SOHC and 4G15 DOHC ?
Tks.

User avatar
Morpheus
TriniTuner 24-7
Posts: 10729
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » October 28th, 2017, 10:02 am

trent wrote:
Morpheus wrote:BTW those local crank seals (most likely the cams too) don't fit properly so they tend to leak. I changed mine twice and then ordered in an original and the difference in even installing it was tremendous.
Let's just say it didn't just slide in by hand like the local, non-original ones.


What are the OEM part numbers for the CK 4G92 SOHC and 4G15 DOHC ?
Tks.

I believe the 4G92 SOHC and DOHC (Mivec)are the same. Not sure about 4G15

Image

User avatar
trent
Riding on 17's
Posts: 1555
Joined: May 27th, 2010, 1:18 pm

Re: CK lancers Part Numbers

Postby trent » October 28th, 2017, 7:41 pm

Cool, tks!

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11399
Joined: March 30th, 2010, 8:58 pm

Re: CK lancers Part Numbers

Postby Ted_v2 » October 28th, 2017, 9:18 pm

I'm interested in a timing belt, locally what's the best option?

User avatar
Mercenary
Riding on 18's
Posts: 1856
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » October 28th, 2017, 11:28 pm

Ted_v2 wrote:I'm interested in a timing belt, locally what's the best option?


Gates

User avatar
trent
Riding on 17's
Posts: 1555
Joined: May 27th, 2010, 1:18 pm

Re: CK lancers Part Numbers

Postby trent » January 5th, 2018, 7:53 am

I'm looking for the part number for this idle air control valve (IACV).
It's for the CK 4G92/93 SOHC
Tks.

2018_01_04_21.37.21-1_resized.jpg
2018_01_04_21.37.21-1_resized.jpg (16.81 KiB) Viewed 10971 times
2018_01_04_21.37.16-1_resized.jpg
2018_01_04_21.37.16-1_resized.jpg (18.68 KiB) Viewed 10971 times

Stylet
Riding on 13's
Posts: 1
Joined: January 18th, 2018, 12:50 pm

Re: CK lancers Part Numbers

Postby Stylet » January 18th, 2018, 12:54 pm

Looking for Part Number for 4G92 Mivec's (DOHC) Cam Position Sensor (the one at the right side of the head), mine needs replacement and its kinda hard searching it here in Indonesia if i dont have the part number, any help would be highly appreciated, thank you :)

User avatar
Morpheus
TriniTuner 24-7
Posts: 10729
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » January 21st, 2018, 12:28 pm

4G92 Mivec Camshaft Position Sensor MD327107
Image

MYVEC
Ricer
Posts: 15
Joined: October 14th, 2006, 2:14 pm

Re: CK lancers Part Numbers

Postby MYVEC » February 21st, 2018, 6:58 pm

Trent, I sell that sensor you asking about. Shout me. 468-3157

User avatar
Mercenary
Riding on 18's
Posts: 1856
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » March 1st, 2018, 2:23 pm

Hello motherfukers.

what is the oil pump seal number for local ck4 4g92 sohc...I see a leak from that area....already changed the usual culprits..cam and crank seal as well as oil sending unit..

I dont have the program to check the number...thanks

User avatar
Morpheus
TriniTuner 24-7
Posts: 10729
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » March 4th, 2018, 9:35 pm

That is the seal behind the crank pulley right? I believe it's the same as the cam seals

User avatar
Morpheus
TriniTuner 24-7
Posts: 10729
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » March 4th, 2018, 11:06 pm

Oh shucks I now see you changed the crank seals already. Original seal?

User avatar
Mercenary
Riding on 18's
Posts: 1856
Joined: December 19th, 2008, 11:19 am
Location: West Indies

Re: CK lancers Part Numbers

Postby Mercenary » March 6th, 2018, 12:35 pm

Morpheus wrote:Oh shucks I now see you changed the crank seals already. Original seal?



yea original ting from teknet...bai Morpheus this ting so baffling eh..I just wana fix the leak an sell the engine...

User avatar
dylan
Riding on 13's
Posts: 13
Joined: August 16th, 2011, 10:08 pm

Re: CK lancers Part Numbers

Postby dylan » March 19th, 2018, 9:31 pm

Fellaz goodnight
Looking for an ecu for a 4g92 mivec...manual

User avatar
Morpheus
TriniTuner 24-7
Posts: 10729
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » March 20th, 2018, 5:01 pm

The engine ECU is the same, manual or automatic..... from what I've read.

User avatar
dylan
Riding on 13's
Posts: 13
Joined: August 16th, 2011, 10:08 pm

Re: CK lancers Part Numbers

Postby dylan » March 20th, 2018, 8:09 pm

Oh ok kool idk that you(morpheus) or anyone here can assist me?

User avatar
trent
Riding on 17's
Posts: 1555
Joined: May 27th, 2010, 1:18 pm

Re: CK lancers Part Numbers

Postby trent » March 20th, 2018, 9:55 pm

Post the code on the box, that shud help...

User avatar
dylan
Riding on 13's
Posts: 13
Joined: August 16th, 2011, 10:08 pm

Re: CK lancers Part Numbers

Postby dylan » March 21st, 2018, 9:10 pm

MR420449 is my code on the ecu or any mivec ecu will work don't gotta be the same code

User avatar
Morpheus
TriniTuner 24-7
Posts: 10729
Joined: July 22nd, 2004, 2:24 am

Re: CK lancers Part Numbers

Postby Morpheus » March 21st, 2018, 9:48 pm

dylan, I will tell you that my car was originally tiptronic. Gearbox now, same ECU was used. It's just the harnesses are different I believe, for engine speed signals,etc for the transmission.

Check for yourself:
http://webhost1.inspire.net.nz/~alphaspr/MIVEC/ecu.htm

Look under Generation 2 of course.

User avatar
dylan
Riding on 13's
Posts: 13
Joined: August 16th, 2011, 10:08 pm

Re: CK lancers Part Numbers

Postby dylan » March 22nd, 2018, 12:30 pm

Thanks alot morpheus...really greatful for your help....also if i buy or get another mivec ecu...what i wanna know is will there be a power loss because of the rs to the normal mivec or the zr?

User avatar
rjaggs
Chronic TriniTuner
Posts: 569
Joined: October 30th, 2007, 1:07 pm
Location: Right here...

Re: CK lancers Part Numbers

Postby rjaggs » April 21st, 2021, 11:28 am

Anyone knows where I can get a mivec front bumper?

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 10 guests