ALL 4G93T OWNERS - Post your most common problems !!!

[kal3]

Guys, any idea where to get a ck 4g93t engine or head and block and what price range they going at?

[Parvin]

Are the intake and exhaust valve seals the same size for the GSR ?

[kal3]

Guys, how to tell if a 4g93 block is a turbo block from the cm5a?

[nicholasfabulous]

Guys, how to tell if a 4g93 block is a turbo block from the cm5a?

Their is a water to oil cooler back of the block and the dipstick hole is to the back

[nicholasfabulous]

Are the intake and exhaust valve seals the same size for the GSR ?

Yhhh I using it now no issue

[pjfred]

I have a galant with a 4g93 gdi in it that hard starts and when it does start, won't restart until its cools for about 20 mins. Anybody could tell why?

[Kronik]

I have a galant with a 4g93 gdi in it that hard starts and when it does start, won't restart until its cools for about 20 mins. Anybody could tell why?

Sounds like a fuel issues, clean the GDI pump and see if it improves

[kal3]

How to tell a cm5a piston? It says 93D-T and below that have EW3..

[cosmo]

Anyone know what gearbox will work with the 4g93 gdi turbo?

[kal3]

Looking for a 4g93t engine ck4.. where can i get one..

Thanks

[LEEL7571]

Hi All, i have a Shark mouth with a 4G93 DOHC non turbo. my problem is that engine cranks and starts then cuts off.... any idea what could be my problem??!!

[Kronik]

Hi All, i have a Shark mouth with a 4G93 DOHC non turbo. my problem is that engine cranks and starts then cuts off.... any idea what could be my problem??!!

Fuel problem maybe, pull out the fuel return line and see if you getting a good fuel flow

[kal3]

Where can i get a complete top and bottom overhaul kit for the 4g93t

[nicholasfabulous]

Where can i get a complete top and bottom overhaul kit for the 4g93t

Teknet bought all my gaskets and seals there