i have no load in the car and it still rides bumpy......kinda like swerving when i driving at abt 80 and above....i feel the springs may need changing.....any ideas....
so is there a way to fix this problem.... my b15 started doing this abt a week now...wasnt before.why would it now start. ps back shocks have been changed abt a month now and still good.
what are the frequency response of the pipes..... are you crossing them the same as a pair of 18 sounds... change the audio and put in 18 sounds in front as well...
basically have consistent weight in the back of my y11 wingroad. ever so often i have to change back shocks.Also with the weight the back of the car drops a bit compared to the front(somewhat noticeable). what i would like is to keep said weight . any ideas for a better back shock or stiffer springs...
get diagnostic done...........OR do it your self.......... The information below may apply to Nissan y11 or b15(did it myself) and many other models Stop vehicle and turn ignition OFF. Connect the terminals with your own wire link PINS 4 AND PIN 9 or pin 4 to ground(same thing)(check manual or pinou...
so i eventually was able to pull up a code for the abs(abs giving erratic problems....abs light would come on sometimes and then again would be off....when light is on abs dont work ,just normal brakes) the code was..... 52.... Solenoid valve, RH rear inlet... what the hell does this mean .....is it...
so i eventually was able to pull up a code for the abs(abs giving erratic problems....abs light would come on sometimes and then again would be off....when light is on abs dont work ,just normal brakes) the code was..... 52.... Solenoid valve, RH rear inlet... what the hell does this mean .....is it...
The brand is permatex, got it at the homestore for $14.49, works really good. It's one use only, but believe me if you use it properly the first time you won't need to use it again.
thanks again rolling stock.....this working great..............
1.had the same problem fellas...was a combination of water pump fins being worn.....as a result the flow was not sufficient to keep the temp to what it suppose to be but enough to not have the car heat to extremities..........had that changed after a simple inspection by the mechanic.... mind you i ...
is there a special adhesive to use when installing a rear view mirror on your windscreen...(like the mirrors the almeras come with).........any advice or help will be appreciated.........
ohhhh the police bashing thread.... so my tale starts at 2 am...i called rapid response and complained of a car parked outside my gate and idling for the last 15 mins....rapid response took the report and gave me the closest police station number(name of station withheld for fear of reprisal)...just...
ohhhh....cool.....lol......... had problems with crank and cam shaft sensor at the same time once already....... went by laughlin and degannes for a scan afet the car shut down....laughlin say they need to start the car in order to do the scan but the car cant start with the defective sensor in it.....
