Forums

BagoChurchBoy

Nice Build.. I like the Positioning of the intercooler

BagoChurchBoy

Got the problem sorted out?

BagoChurchBoy

Make sure that the plug wires are not jumping back out. Sometimes the substitute dont fit as snug as the original.

BagoChurchBoy

Most Likely the Gas May have leaked out. Check an ac repair shop

BagoChurchBoy

If you cant find a fix to the problem, a tin of engine restore helped lessen my noise. Worth the try

BagoChurchBoy

ummmm... depends on how you drive and yes like any other part with a bearing it does go. Id say the bearing type lasts longer and you get a better ride

BagoChurchBoy

I personally used both on my car before. With regards to difference; in my opinion I don't find it feels extremely different but the bearing ride is somewhat more smooth.

BagoChurchBoy

Check out the IACV. Could be faulty.

BagoChurchBoy

You will only be decreasing the resale value of your car by doing that conversion. If you need some help I can point you to a place that has a few 4g15 engines and transmissions lying around for a reasonable price. Back to the question at hand though- My cousin did this with his car just about 2 mon...

BagoChurchBoy

Ok where to begin... 1. Car idles very rough, when air condition is on. Causes of this are dirty Throttle Body (TB) and faulty Idle Air Control Valve (IACV). Both can be cleaned and serviced. 2. Car is making a sharp, metallic, "clank" sound when I hit bumps in the road. Have no idea what...

BagoChurchBoy

http://www.trinituner.com/v3/forums/viewtopic.php?f=33&t=16630

I think this is what you are referring to.

BagoChurchBoy

what they both said.

BagoChurchBoy

Afaik, Premium is the best gas to use. When You use super the engine behaves VERY sluggish. However, when you use premium you see your gas needle move in front your eyes.

BagoChurchBoy

Hmmm.. Making me consider looking for alternatives as well.

BagoChurchBoy

Morpheus. So what filter are you using now? I also have been using FRAM since 2008 there about and have not had any problems.

BagoChurchBoy

mitsu_crazy wrote:Vaccum hoses idle air.control.valve

Service the throttle. If gunk is built up around the plate theres an air seep

Also.check.the dizzy cap clean it a bit.

If you get the problem mostly when the A/C is on then this may most likely be the culprit.

BagoChurchBoy

check the headlight harness itself. check and see if the low beam connector isn't corroded or has a short

BagoChurchBoy

What vehicle?

BagoChurchBoy

gastly369 wrote:check your ground and or where you located/installed your RCA cables

X2

BagoChurchBoy

black start wrote:why not get something like this?

http://www.amazon.com/Auxiliary-Automot ... S+-+Taiwan

Nice Find there

BagoChurchBoy

Well dayum. I might freak out if I ever realized I pulled in something that big lol :shock: Seriously tho, what do they do with these record catches? They chop it up and sell it as usual? That's a lot of chopping and selling. Many people got PLENTY free fish. The Majority was stored in one of those...

BagoChurchBoy

De Dragon wrote:What's the world record though?

Not sure about the world record, but a villager caught one 2 years back weighing 850 or somewhere thereabout.Took them about 3 boats to bring it in.

BagoChurchBoy

Throttle Position Sensor giving trouble. Try removing the connector from it and see if there's any change in behavior. I'm having the same problem

BagoChurchBoy

RIP. Condolences to the family and friends

BagoChurchBoy

Altec, you ever got the bulbs?

BagoChurchBoy

So I pushed my car today, it went to the "E" marker, ran nice, however when i had to take any sharp corners, I was in some drama for about 2 seconds or so, and in driving that's alot of time lol. I also saw the EFI tank today and would recommend it over trying to fabricate a fix for the pr...

BagoChurchBoy

I took a "S" corner once going in about 120K (just got the car)... prior to it was taking some sweeping corners coming from Les Coteaux and the back end would edge out slightly but was in check once you keep the foot on the gas and steer in the direction as if you driving FWD: point the w...

BagoChurchBoy

Most Likely the ones you Need is 194 (T10) .The smaller ones are usually used to illuminate the signals like handbrakes etc are T5 im not certain about the number.

BagoChurchBoy

As long as you get the entire Spindle with the handbrake cable and trailing arm. Its supposed to work with little or no modification at all.

BagoChurchBoy

Hmmm not sure for 4 X 100. You'd have to check the forum online here for Ck rear disc brakes . If its 4 X 114 Mivec Ck, or even Cedias should work. You wld have to get other parts than just the rotor and caliper I believe. Best bet to avoid the headache would be to just buy the complete setup.