Forums

You'll need to inform your electrician of any work done recently; like gps, alarm, music, anything. It sounds like a simple ground problem though; add an additional ground from battery to engine and engine to chassis. That oem baby ground the engine has probably broken, mabe where it jacks inn. If t...

Usually when Subarus have that issue, it's a simple fuel problem. Did you change the fuel filter? You can do a simple flow test at any mechanic. If you didn't change your filter anytime you remembered, then it's most likely half way clogged. The flow test may reveal such. The fuel pump may be a bit ...

Yes where you're from. I can put you on to someone. You can service that sensor yourself though. Just carefully remove it and use a QD crc spray to clean it. Do not touch the internals; just spray; don't matter how dirty it may look ok. Not even cotton. Pm me your location; will see what I can do. S...

Run a diagnostic first to ensure its no sensor. The cause for the vtec to act up like this is because the oil isn't thin enough to actually engage the vtec. This will eventually damage it. Please stick to the factory recommended oil and not trini machanic recommended..lol. the manufacturer recommend...

10w 30 or 10w 40 is required. Remember that is a high performance engine. The factory recommended is 5w 30. Amsoil will surely do the trick. However, you should run a diagnostic first; if there are no error codes showing up, then you know is the oil. I know amsoil is a bit costly but this oil will l...

Most likely this sounds like the oil you're using isn't able to activate the vtec. Amsoil or shell is required for this application.

Sent from my GT-I8190 using TriniTuner mobile app

ok what's happening mostlikely, is the fluid line to that wheel has collapsed inside and now needs replacing. however, if the lines are run independently from the master cylinder, then that is the cause, and you can replace the bubber seals in it. make sure to bleed over the entire system after and ...

dude try capital. as far as i know, they are just glad someone will go to them

from licence officers and senior police officers

all you guys out there, the police have strict instructions to charge you with any bulb installed around your vehicle that isn't original for that vehicle; just a heads up. i gave away all my led bulbs .....

yes police wants you to have only original stock bulbs installed. anything else you'll get it

anytime dude

ok in libertville, if u find fly's car wash, the guy who does the work is situated approx 2 houses after this car wash on the right hand side of the main road on the way towards p.twn. very easy to find. they have a big white gate at front. if u lost, just ask any one around for ravi who does uphols...

if so i'll give u directions

ok where u from, do u know rio?

dude u just have to go to a good upholstery guy to get this done. i have a friend who does this perfectly on any vehicle, but he's from rio claro