Forums

transporter001

Doing it on Tuesday

transporter001

Hello, I'm not sure were to post this but, I've been thinking about getting a dash cam for sometime now. Thanks to an incident yesterday evening where I wrongly received a ticket, my interests in getting one has been renewed. Does anyone sell / install dash cams locally and can any one offer review...

transporter001

Is the TIIDA key chipped?
I need to get a spare key cut as I only have one.

transporter001

Get yourself a hayabusa

transporter001

Sounds to me like the timing on the crank and cam is off. Got this problem with my civic when I replaced my timing belt. Only when I used the timing light i realized it.
So my advice, use a timing light

BTW, what kinda car/engine is it?

transporter001

If you raise up the tail of an elephant what will you see?

the engine, cause the trunk is in the front

transporter001

TriniVdub wrote:Santa Cruz is fine

Hoss yuh talk too fast. Current now come back though

transporter001

Did you check the flex lines?
Are you getting a good flow when you bleeding the brakes?
Are you losing any brake fluid?
It sounds like either of the two, could be the flex lines expanding or there is air in the system, or there is fluid leaking somewhere.

transporter001

is it is the 'silver' brand disc pads? If it is, the pad is smaller than the original. I know this cause i had my rotors machined and it was only until i matched the old pads with the new ones i realised the difference in physical size.

transporter001

one of this you need:

http://www.pioneer.eu/eur/products/arch ... index.html

I got one a few months ago, works with a normal flash drive.

transporter001

***definitely

transporter001

The SR would be a better choice because of the weight. With all the weight of the RB in the front of the car the back would get lighter (like a see-saw), so you'll definitley have a problem when it comes to traction.

transporter001

Just remember to upgrade your wiring when changing from stock bulbs (55/60) to higher wattage bulbs (90/100). You'll definitely need to change the sockets (the stock ones will burn out). I used this diagram to make way for the 100w bulbs [imgwh:640:480:23z9zw2u]http://forums.trinituner.com/upload/he...

transporter001

Someone gave me the bulbs, not too sure where they got it. Check motorist or any one of those places to get original or good brand bulbs.
I bought a pair of xenon bulbs a few weeks ago, the colour temperature will be different, but the light output will definitely be less in terms of lumens.

transporter001

I was doing some research on this. Apparently cheaper made bulbs have less precise placement of the filament. From physical comparison it was clear that the filament on the old bulb was a bit out of shape and the part to block the light below the filament was also at a bad angle. I replaced it with ...

transporter001

Oh, i forgot to mention. I buffed the headlights and i was still getting the problem. I also opened the headlight and cleaned the reflective lens and plastic lens with glass cleaner, still same problem

transporter001

The headlight beam in my civic need some focusing or something, The beam has a small area of high intensity an around it has a lot of glare. I looked for adjustment for the focusing, but there is only an up/down, left right adjuster. [imgwh:550:368:wg7xyrq8]http://forums.trinituner.com/upload/200904...

transporter001

check/change the spark plugs

transporter001

Cast your vote and see the results worldwideâ€

transporter001

I want a HDC beach house.... anyone have links?

transporter001

transporter001

i have a f5m21 gearbox, the cable type if u interested

transporter001

Thanks, for that info. By chance do you know where i can get shifters for the c62 lancer?

transporter001

I would like to change my c62 lancer from manual to auto, I'm changing the engine and gearbox to a 4g93 an tranni. What model selector would work on this? also will the shifter work with the manual cables or is the shifter electronic?

transporter001

MISHI wrote:F5m2(1) usually is the code for the early cable gearboxes, which came on the 1.3 - 1.5 engines.

F5m2(2) are the codes for hydraulic boxes for use with the higher output engines...

Any of these will bolt up on a 4g63T or 4G93T? How easy is it to source the F5M22 gearbox?

transporter001

Anyone knows what engine could fit in this gearbox. I currently have a 4g37 engine and the F5M21 gearbox. I was doing some research an i saw that the F5M22, which came with the 4G37, could work on the 4g63T engine. So the question is: will the gearbox i have fit in a 4G63T?

transporter001

When you say it burns a lot of gas, how much km's do you get from a tank? ($120)

transporter001

Use some threadseal on it if i's not worn badly, that should keep you good for a while

transporter001

speedway dont have for the 32/36, they only have for the sidedraughts. I know this caused i checked the whole of petit bourge with no luck. So i would say go by sherrifs

transporter001

what he means is, the cars that make the noise they took out the silencer and put the exhaust that u want. If you dont want the noise you can keep your original silencer an jus put on a tip at the end of the muffler