Forums

shocksub

dude, whatever feels best is usually it, listen and feel your car, if you know your car, you will know what is the best launch, the info that these guys gave is correct; practice makes perfect. It have real men who think they car fast on Calvary Hill, X, whatever you call it, but are dogs on the lig...

shocksub

shocksub

What kinda mango tree, dude, when you spending money on car, you already spend good money on cam, then cam gears, then you go scimp on the final details? Installation? parts is one thing, getting someone who knows what they are are doing is the trick, if just buying parts gave you HP, then evry Tom,...

shocksub

h22 in a teg should be faster eh? I believe in the H22a but 14.6 sounds kinda slow

shocksub

H22a, real ting, it's a honda so wiring is not too far placed, great power, no cutting, whoever chops up yuh civic to put one in doh know what he doing. Plus you keep ac and ps, what more you want? Plus cheaper and easier to find than B18c or B16a, some minor suspension changes and you good to go.

shocksub

X2, that is probably true, didn't think of it like that the d16y8 engine was vtec, so no issues, but, I eventually replaced the coil with an external coil, but getting back to what cleriq was asking, it would be good to have on handy, honda internal coils can sometimes be troublesome.

shocksub

May not fit, but all the internals should be the same. Gutted the internals of D16y to put in a H22

shocksub

Is anyone currently trying this? From what I have read so far, can use TWM ITB intake ( expensive ) or CBR,hyabusa, ITB's and make up a manifold to fit, still may need an aftermarket ECu to make it work, if not using cbrr itb's, have been done not using aftermarket ecubut witha piggyback, vafc. What...

shocksub

Well Val, yuh on, time to rip out the auto

shocksub

Val, same kinda thing with mine, vtec does not engage when the engine is cold, the ecu looks for a few things, like engine coolant temp, rpm and vehicle speed, combined with map sensor. Standing still, the cams would not engage on my car revving all the way up, I have since changed that, but the ecu...

shocksub

Be real careful putting on the KS, real easy to break the wire housing, there is a special socket to use for it. Because it is on the block itself, the heat transfered to it is intense, so the plastic gets really brittle, but before you buy one, check if the wire is damaged first, make sure the sens...

shocksub

ANP sells it, so should be good to go.

shocksub

Crix, doh stick with overheating problems, get it sorted fast or the cost starts going up exponentially as more damage amy be done.

shocksub

Hole in engine mount?? Check all your mounts, that could be real serious problems, damages all sorts of things quick.

shocksub

FPR and upgraded fuel pump is a good start, when your throttle is wide open and the engine is under load, sometimes pressure goes down, causes general loss of power, too much fuel pressure and you cant burn it. It's always about tweaking and experimenting. Plus it's always the combination of upgrade...

shocksub

Favourite breathing spot??!! Hahahahaha, sweet.

shocksub

Dude, you have a nice setup, but as X2 said, your setup may need tweaking, maybe grippier tyres, some heavier springs in front, etc. Keeping it in Vtec? Yeah good idea, but remember, you have to leave the line quick, check your 60ft times, wheel spin may be hurting but with your setup as is, you wil...

shocksub

Skidmarqs, the more you race, the more you will learn, and you will learn from the other drivers. Concentrate on being consistent ( I am still struggling at this), and you will get faster, and have fun while you do it.

shocksub

Very good to know

shocksub

Dry, Which kit did you get? Aquamist or CoolingMist?

shocksub

Turbo, how about a supercharged K20A2? these guys from tts-performance did it, using a Danish supercharger company called Rotrex. Apparently, the car made 346whp. they catered for drivability low end but fierce performance on top, all without internal engine mods. That would be a great forced induct...

shocksub

Go to Montrose, Chaguanas opposite Sonny's auto Parts, there is auto electrical garage ask for Alan, he is good with that stuff, wired a conversion for me.

shocksub

If I am not mistaken, there are a couple of electrical issues there as well, ie some solenoids on the auto that have to be played with so the ECU ( auto ) does not go into hysterics. But you don't absolutely need a manual ecu to do this conversion. factor in some cash for that and an electrician.

shocksub

Kes, if you giving a demo, contact me, I did not know that this was available here.

shocksub

Interesting, I thoughts bikes did this by killing the engine for a split second. The Hondata does that? Works on H22A? Ichecked the site and looks like they dont support my ECU. I was thinking of trying some thing with a clutch pedal switch before to kill the spark to the injectors. Anyway nice vid,...

shocksub

Wah yuh car regular, and wax and polish it, reduces drag by 0.0012576%

shocksub

Black smoke? No Power? Could be a number of things but sounds like your no burning your fuel, check your plug wires and coil, you need to properly run thru your electrical to be sure what is working properly first, then you will be able to find the problem, better yet, check your mechanic, if you ha...

shocksub

Eston, Specialist Muffler 2000, in St Madeline, good work, good advice

shocksub

The Proxes? which ones Toyo RA1 was what I had in mind, or were you talking about the r-888's. How much and how fast? Probably w rated, the fastest I will probably go right now is late 14 second. Money-no idea, those things cost but if you know, you have to spend more than on Dunlop Gold seal tyres....

shocksub

Guys, just looking for some feedback on a good trackday tyre ( no an all out gummy slick ). I have looked at the Nitto NT01 but there is also the Hankook, Kumho Victoracer etc. I am really looking to see if if anyone has used them in Trinidad ( or any other ). My application is mainly for drags but ...

Forums

Search found 155 matches

ITB's on B16/B18/H22?

Performance Tyres