Forums

Rayden6

Looking for the rear suspension bushings for the EA1A chassis
Rear balljoint arm bushings X4
Upper cradle bushings X4
Upper knuckle arm bushings X4
Any help locating....

Rayden6

Where is That brand of bushings sold locally or I'll have to import them

Rayden6

Looking to buy SIBERIAN BUSHINGS for VRG Galant rear suspension how do they work compare to poly and why does it have to be greased.

Rayden6

Any 16X8 R32 rim for sale here?

Rayden6

RIP Chester remember the early days mounting up cars for the Late Billy and Burton in the Bamboo...

Rayden6

RIP Chester remember the early days mounting up cars for the Late Billy/Burton in the Bamboo...

Rayden6

Cleaned a TB with kerosene and it idles at 900rpm is this normal or should it be lower. What is the purpose od the spring loaded valve at the side of the TB? It was removed and cleaned

Rayden6

Subzero?

Rayden6

Could I cut the Ebrake drum part and shorten in brake rotor with the shoes inside for the Ebrake? Want to do a Mod but the width of the drum part is to wide. Bredda man just be careful when it come to modding brakes I know but I'm not getting a double piston rear setup with mu OEM ebrake width. Try...

Rayden6

Could I cut the Ebrake drum part and shorten in brake rotor with the shoes inside for the Ebrake? Want to do a Mod but the width of the drum part is to wide.

Rayden6

No the butterfly the spring loaded flap where the hot water goes, in The QG like it controls the air that sticks and cause problems with IACV and the ECU IC's

Rayden6

Change TB and ECU back to normal, open old ecu 2 idle IC blown $600 to fix with mew parts. Now is just to remove TB and clean idle valve so it's free was to must clean every 3-6 mths

Rayden6

Currently installing 3/0 welding lead front to back with 0Awg IN X 2 4Awg outs under the hood fused 1 for car electrical the other for Alternator. Starter run separately to fused in trunk looking to put Optima 27M blue top. Should I put a battery box? Using brass lugs to make wire connections on bat...

Rayden6

Y11 QG15 Cable type
Changed mine today used a NSK 6301 $30
Alternator Belt is 6PK1110 $85 Bando
Power steer 3PK855 $45 Bando and Crank seal $25
As I in there changed all one time.
Seal came out with no effort put thread seal on the outside so it fits tight on timing cover.

Rayden6

Who sells Odessy batteries locally

Rayden6

Looking for 4G92 twin cam mivec complete block

Rayden6

Which is better Ecumaster Classic or DET3 for 1Jzgte Soarer engine/auto.

Rayden6

Looking for a cable type hand brake caliper for a modification,anybody has this? Could I use 1 caliper for handbrakes or do I have to use the pair?

Rayden6

Have a pricemart red top batter pole became slack dont know why but it seems like a regular problem with this pricemart batteries

Rayden6

Read this book and you will see all what the elites have in store for the world population
PROTOCOLS OF THE LEARNED ELDERS OF ZION a red cover book

Rayden6

Yes it has a vacuum Air solenoid like the purge canister one, cleaned it level carbon build up caused by the EGR which I deleted one time

Rayden6

It is supposed to enhance overall drivability and emissions and efficiency. The downside is they get very gummed up with blow by and in almost all situations where I scrapped for a plug change they were stuck with oil turned grease. An oil catch can would render this system that supposed to be effi...

Rayden6

What is the purpose for the butterfly shaft on the head side of the QG15DE intake manifold operating via a vacuum plunger

Rayden6

What's the purpose of the flap on the intake manifold that's controlled by a vacuum

Rayden6

My QG15 cable type just so idling at 1200rpm change TB drive same thing what's could cause this?
Was told ECU the idle chip could be blown.
Need Help

Rayden6

Was told about that seal where could it be purchased? My cable type Qg15 started doing this after 2yrs park up. Help needed.

Rayden6

My QG15 cable type park up 2yrs now fresh H&B before, now using it smoking blue/white what could cause it? Could it be the rings asleep? Suggested filling plug hole with trans oil over nite to free them up???? Help needed

Rayden6

Remove intake and clean power flap on it carbin builds up via EGR, i removed mines to change water jacket talk to stink it was seized.
Clean it pitchoil and working well dont know if that would cause it also removed EGR and weldes lines off on QG15 cable type

Rayden6

Anybody use Rsr lowering springs on there WFY11? Whats the ride like? It the car level or at a angle?

Rayden6

Just installed 4 RSR Ti2000 Black ones on my Y11 all bushing left slack to tighten when loaded.
Just want ti know the close coils is the bottom of the rear spring or top?