Forums

Dave-ve

Will install a wideband to tune them. Have to get a new sensor first. Idle jets and main venturi are in the ballpark of what is needed. May not run the car for the rest of the year.

Dave-ve

still to be tuned:

Dave-ve

Some pics: http://forums.trinituner.com/upload/data/89/20141009203927-IMG_0977.jpg http://forums.trinituner.com/upload/data/91/20141009204111-IMG_0978.jpg http://forums.trinituner.com/upload/data/1f/20141009204208-IMG_0990.jpg http://forums.trinituner.com/upload/data/17/20141009204239-IMG_0991.jpg h...

Dave-ve

Car in question was properly scrutinized. MBC was not connected. Coilovers contributed to the class bump to SS. Driver says the MBC is only used in D&W. The rules are not perfect and they do need review. Personally, I believe a car straight out of the showroom should not have any penalties attac...

Dave-ve

................................

Dave-ve

...................

Dave-ve

Some more pictures

Dave-ve

Both.

Dave-ve

Had to stop the timer manually. The start & stop were too close to rely on gps.

Dave-ve

Tested the trackmaster app for android phone.
Need to adjust my braking zones and keep on the power.

Dave-ve

Does anyone know the cost of a folding tent? A 6×6 tent can be set up in the marshalling area. Renting a tent for marshalls at every event will be expensive.

Dave-ve

offset depends on your driving style. Low offset all around will corner well but steering is twitchy on the straights. Low offset in front alone gives you oversteer but steering is still twitchy. If you have different offset wheels you should try the combinations during the bycc to see which you pre...

Dave-ve

Dave-ve

In the rain

Dave-ve

what application are you going to use it for?

Dave-ve

Installed a new front valance on my car and the existing tow hooks are now too far back to be used. I prefer to use an eye bolt for the new tow hook mainly because it has a more understated look than the after-market aluminum ones. This is what the original ones look like (280zx). http://forums.trin...

Dave-ve

Is it possible? My car is built mainly for grip driving and this is the cheapest lsd swap right now. There is mixed reviews on the net. Anyone use this?

Dave-ve

Having a strange problem with my DX wagon. It would start ok on mornings and idle well and run normally for about 2-3 minutes then it would suddenly loose power for about 1 minute and then run normally afterward. Check light does not come on and the idle is not affected. Engine is a 5E-FE with the t...

Dave-ve

The oem jacks used the single spade lugs inside the plastic. The old lugs can be removed with a needle nose pliers and new ones inserted. There's a tab on the back of the lug that locks it in place.

Unless you are buying jacks from painless they are almost impossible to find.

Dave-ve

I used the painless fuse box when I rewired my Z but I also converted to carbs. My efi harness was later stolen. The engine harness would be easy to make yourself. You can buy wires by the foot from Lenny Sumad. Remove your harness and just make an identical copy. The pins on all the jacks except th...

Dave-ve

I was told that the RB 20 brain and harness could work on the l28e. You could look into that.

The existing harness could be rebuilt but the problem would be finding replacement jacks as I'm sure the original ones are brittle and corroded.

Dave-ve

Reversing on the course is now a DNF?

Dave-ve

Is this simple as just swapping the bell housing. No machining required? (dogleg box to RB)

There's mention of doing this in other threads but no details on the swap.

Can anyone shed some more light on this.

Dave-ve

Its for a 280zx. They have all fittings in stock and was made in less than 10 minutes.

Dave-ve

Was Hoping to get a tube for a grease gun. My superpro kit came with grease nipples and they were installed on the cradle arms.

Dave-ve

Cost $1200 at Trinidad Hose

Dave-ve

Can this grease be safely used on poly bushings? I'm looking for a tube of fully synthetic grease also.

Dave-ve

Anywhere sells metalworking tools? Want to get a shrinker/ stretcher.

Dave-ve

My datsun:

Dave-ve

My mistake- the switches and shift light are connected to pin 2 along with a remote start module. I just tried connecting it to pin 3 and the switches work without affecting the tach but while idling one switch turns on erratically and throws off the idle. I'll try building a filter for pin 3 and se...