Plugs?

extremehonda · Postby **extremehonda** » October 13th, 2010, 2:17 pm

What are the best plugs to get. I am thinking of getting silvers, heard they give very good conductance. yttrium, iridium, platinum, tungsten, or palladium?narrow or wide gap?tip? what's your views on this. AFR is about 13.

red_dragon · Postby **red_dragon** » October 13th, 2010, 2:49 pm

^ NA or Boosted will vary on the plug choice

NA 6 heat range or 7 if high compression
Turbo 7 or 8

AFR is 13 when on idle or WOT

if is HP gains u looking for on plugs waste

cause this one will say one brand and the other .. etc :agrue:

in other words a $500 set or plugs not gonna give u a big jump over if u run $100 plugs for a DD

correct temp and gapping makes the difference

stick to what the manufacturer recommends

bonestock · Postby **bonestock** » October 13th, 2010, 3:04 pm

good advice red dragon. I use what my mechanic Kazim puts in my EK4 SiR and it is run

- Champion Platinums...

CD4Accord · Postby **CD4Accord** » October 13th, 2010, 7:22 pm

I agree entirely, just be sure to check the reccomended plug in your manual and follow the heat range.. Remember heat ranges vary by brand..

Personally, I run NGK Iridium's heat range 6 on the accord

extremehonda · Postby **extremehonda** » October 13th, 2010, 8:22 pm

I have a manual b16a with MSD blaster ignition. AFR is 13 @ WOT and comp is 10.4:1. Anybody knows the suggested gapping? and im thinking of using heat range 7.