WTK CIVIC D15B AUTO TO MANUAL PROBLEMS

Vin24 · Postby **Vin24** » May 28th, 2012, 4:09 pm

I recently converted from automatic to manual, but my check light is staying on at all times. cud any1 help?? is it dat i hav 2 change my brain & harness also?

turbochinee · Postby **turbochinee** » May 28th, 2012, 4:45 pm

The only problem i got with my conversion was with my IACV. I had to change from a 3 wire to a 2 wire IACV, which you could get from any manual honda engine. Eg. I got mine from a b18c

But i didnt get any check light though. Maybe because i had a manual brain. Hopefully the other honda gurus could help you.

j-honda-civic · Postby **j-honda-civic** » May 28th, 2012, 5:17 pm

what engine you have vtec or none vtec or it is the three stage vtec one

enigma · Postby **enigma** » June 1st, 2012, 12:08 am

Find out why the check light is on would be a good start....

Vin24 · Postby **Vin24** » June 1st, 2012, 10:09 am

j-honda-civic wrote:what engine you have vtec or none vtec or it is the three stage vtec one

yea i hav a 3 stage vtech D15B

j-honda-civic · Postby **j-honda-civic** » June 1st, 2012, 7:48 pm

d you have idle problems

infinitesounds · Postby **infinitesounds** » September 4th, 2012, 4:44 pm

Checl light is cus ders no convertor selionoid to d ecu to pick up is nothing but I do d conv and my temp gauge not workin or speed gauge d faster i go das how d temp workin lol

embryo · Postby **embryo** » September 5th, 2012, 4:23 pm

once u are using an unchipped automatic brain with after a manual conversion you will always get a check light....if u have a cvt tranny you will have to run a by pass on some wires to get it off or could go the way of buyin a chipped ecu an call it a day!