exhaust tip question

someone904 · Postby **someone904** » October 17th, 2007, 10:08 am

ok..... qg 15 de....not to sure about the exhaust piping size,but basically wat i wanna do it change the tip to a nice silver one with a burned tip. thing is i dont want the sound.... or noise

.how can this be done to make it sound like the stock exhaust or not sound :roll:

......thanks peeps

http://www.qwkwhip.com/mufflers.html last one on page :twisted:

Aaron 2NR · Postby **Aaron 2NR** » October 17th, 2007, 10:10 am

you'll get noise once u change the existing exhaust to an aftermarket one....if u put on a tip alone you wont get any noise..

Samiir_Tuner · Postby **Samiir_Tuner** » October 17th, 2007, 10:37 am

get the tanabe medalion concept g...great performance thats pretty quiet

drunkenscorpion · Postby **drunkenscorpion** » October 17th, 2007, 11:08 am

Yeah, just change the tip alone, you won't get the noise.

Dion76 · Postby **Dion76** » October 17th, 2007, 1:10 pm

jus make sure and go by a good muffler man to put on the tip some men does weld it real nasty and it does look bad :idea:

someone904 · Postby **someone904** » October 18th, 2007, 2:13 pm

but to me changing d tip to a round one is wat does cause d noise...so all them cars that making noise have aftermarket exhaust piping....might be wrong but that kinda hard to believe :roll:

Aaron 2NR · Postby **Aaron 2NR** » October 18th, 2007, 2:16 pm

not pipin...sigh...the exhaust itself..once u change the original to an aftermarket one you would get noise since the after market one doesnt damper the sound comin out from it.....

someone904 · Postby **someone904** » October 18th, 2007, 2:18 pm

ok well can u define exhaust for me..where does it start to finish

transporter001 · Postby **transporter001** » October 18th, 2007, 2:30 pm

what he means is, the cars that make the noise they took out the silencer and put the exhaust that u want. If you dont want the noise you can keep your original silencer an jus put on a tip at the end of the muffler

someone904 · Postby **someone904** » October 18th, 2007, 2:37 pm

ok.....let me rephrase the question.....i wanna put in a tip that has a round suppose to be muffler/silencer like the last one on this page http://www.qwkwhip.com/mufflers.html ....isnt it true that these mufflers are replaced by the user to allow some sort of noise?i am almost certain this one will give off sound.....wat i wanna kno is how to eliminate this noise when it is installed( i will be replacing the original silencer to accommodate the new barrel(if that is wat it's called)

theblitz · Postby **theblitz** » October 24th, 2007, 1:39 am

dat one? yeh u gonna get noise. If you dont want noise then STAY STOCK OR GET A TIP ALONE! what u show in the link is a exhaust barrel/muffler..... sacrifices quietness for slight performance gain due to less restriction.

what is dis u sayin bout "replacing the original silencer to accomodate the new barrel"? u can't have both. U REMOVE the stock 'girlie-looking' silencer and install one of these mufflers.

It seems u just wat a tip though.... piece of metal that does nothing and tries to look half as kool lol

someone904 · Postby **someone904** » October 24th, 2007, 6:46 pm

yea that one.........i've been told that i can either put another resonator higher up by the stock one to help or i can get an exhaust barrel with a built in silencer.....wat i also wanna kno is can i modify that barrel(pic) and have my own "built in silencer" :roll: