TriniTuner.com  |  Latest Event:  

Forums

Exhaust pipe sizing

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

Rayden6
Sweet on this forum
Posts: 300
Joined: June 7th, 2005, 7:20 pm
Location: Locally

Exhaust pipe sizing

Postby Rayden6 » June 2nd, 2024, 10:05 pm

Tuners doing a QG18 de Conversion, Almera type on a Y11 what size exhaust pipe to run front to back?
Got a GA15 exhaust manifold so i deleted the catalytic converter and EGR setup.
What is suitable so would backpressure Engine?

deltagulf
Ricer
Posts: 21
Joined: April 15th, 2013, 2:32 pm

Re: Exhaust pipe sizing

Postby deltagulf » June 12th, 2024, 8:27 am

If you are converting a QG18 to Y11 with a GA15 exhaust manifold and no catalytic converter or EGR equipment, we recommend a 2.5" exhaust pipe from front to rear. This tube size provides a good balance between increased performance and minimal backpressure. As stated in the Honda Tech forums, a larger pipe (2.
5" or 3") will allow you to extract more power from your engine, especially since you are removing the catalytic converter and EGR device. However, it is important to consider that a larger pipe may result in increased booming and noise.
In your case, a 2.5" pipe should provide a good compromise between increased performance and noise levels.
Additionally, you can add a high-flow metal-core resonator and a quality muffler to reduce boom and noise.
To ensure smooth and safe operation, purchase hose kits from a trusted supplier and install and weld them properly.

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 19 guests