p11 rear shocks/springs on a b14

[island_boi]

I looking to use rear p11 shocks/springs on a b14 at stock height I just want it stiffer and to take the weight better when my backseat full. My question is whether the wagon or the sedan shock/spring combo would keep my car at the same height it is now. Want to avoid the back ending up higher or lower than the front

[ddog]

If I recall correctly that p11 setup should be about an inch shorter than the B14 setup. I don't know what the actual height may be after install. I am guessing you may be a little bit lower than stock.

[Ted_v2]

P11 rear shocks and Springs work on almera and b15. Need to use the stock shock head from the almera. 1" higher but way stiffer.

The p12 bolts right up. 2" higher. B14 I have no idea

[skylinechild]

the P11 springs can work on the b14. they're alot stiffer and can take the pressure.
and theyre actually slightly higher than the b14 spring. when the car takes load it doesnt look like it sagging in the back.

alot of b14 men out there using p11 springs.

[island_boi]

thanks fellas