TriniTuner.com  |  Latest Event:  

Forums

For Dave and others with SR20de..optimising your SR20de

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

k.c.151
Chronic TriniTuner
Posts: 507
Joined: May 5th, 2005, 9:47 pm
Location: Check Google Earth...
Contact:

Postby k.c.151 » March 22nd, 2006, 3:20 pm

excellent info... have to go through thoroughly....

User avatar
nismaniac
3NE2NR is my LIFE
Posts: 801
Joined: August 11th, 2003, 11:37 am
Location: Home.........

Postby nismaniac » April 14th, 2006, 8:58 am

if only I could afford to do those upgrades. I read on one of those nissan sites about a 300hp n/a sr20. It was built around a turbo block of course. :mrgreen:

User avatar
Val
18 pounds of Boost
Posts: 2434
Joined: June 9th, 2005, 9:03 am
Location: Trinidad

Postby Val » June 22nd, 2006, 3:44 pm

makes me wanna buy an SR20DE

good info.

User avatar
akash_persad
Riding on 13's
Posts: 9
Joined: June 18th, 2006, 9:18 pm
Location: Penal
Contact:

Postby akash_persad » August 2nd, 2006, 2:33 pm

dih them i find this way easier to learn............but one problem i hav an sr20 in a non nissian car so muffler pipin and thing i will not be able to buy and air flow pipin also so wat should i do........go to the muffler shop?

User avatar
disco biscuit
Street 2NR
Posts: 68
Joined: May 26th, 2003, 11:28 am
Location: Up Town

Postby disco biscuit » March 15th, 2007, 10:55 pm

Soon...all this information...soon...

User avatar
chippy
Street 2NR
Posts: 90
Joined: April 10th, 2007, 9:14 am
Location: St. Augustine

Postby chippy » July 31st, 2007, 12:23 pm

ah have a set of cams and pullies from the states ....Who is a good men to slap these in??

User avatar
jonspeed
Riding on 13's
Posts: 8
Joined: March 17th, 2008, 7:08 pm
Location: central
Contact:

Postby jonspeed » May 2nd, 2008, 7:36 pm

aye art, thanks for the info, that was quite generous of you, cause for ppl like me, i trying to safely get the most out of my SR without destroying it, but i didn't know way to get the info. thanks!!!

User avatar
slimshiney
Sweet on this forum
Posts: 376
Joined: May 14th, 2005, 8:30 pm

Postby slimshiney » July 3rd, 2009, 8:53 am

great info...dere...prints for a small book dere...thumbs up!

User avatar
Back2Studio
I LUV THIS PLACE
Posts: 995
Joined: May 26th, 2010, 11:08 am
Location: Chirpin tyres and gee'in fyazz
Contact:

Re: For Dave and others with SR20de..optimising your SR20de

Postby Back2Studio » November 29th, 2010, 8:17 pm

Image

User avatar
kevinkassie
Ricer
Posts: 28
Joined: August 17th, 2009, 9:18 pm
Location: maraval
Contact:

Re: For Dave and others with SR20de..optimising your SR20de

Postby kevinkassie » December 12th, 2011, 12:26 pm

queston?doing a conversion on my b13 is d p11 sr20 an i'm going gearbox gettin problem in linin up d back mount bracket with d shifters rod.wat should i do?thnx

Gerard91
Street 2NR
Posts: 72
Joined: July 9th, 2012, 8:12 pm

Re: For Dave and others with SR20de..optimising your SR20de

Postby Gerard91 » August 14th, 2012, 7:40 am

dave could u tell me how do u rate a sr18de with gearbox? is it any good as a sr20de? cuz i am doing a conversion with a sr18de at d moment i'm putting it in a accent it's a project by d way. wat 2 expect from engine how wld it pull in dat car ?

User avatar
Dave
3NE 2NR Moderator
Posts: 17976
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: For Dave and others with SR20de..optimising your SR20de

Postby Dave » August 14th, 2012, 10:14 am

a SR18 is down on power when compared to a SR20 so right off the bat you won't be on par with a SR20.
However in a light car such as an accent the SR18 would still pull the vehicle good.
Make sure you can stop.

Gerard91
Street 2NR
Posts: 72
Joined: July 9th, 2012, 8:12 pm

Re: For Dave and others with SR20de..optimising your SR20de

Postby Gerard91 » August 14th, 2012, 3:41 pm

i converted the front brakes to p11 brakes but I'm hav difficulties find rear disc brakes for the accent an a proper suspension for it any advice on dat ? cuz i wnted 2 lower the car but i don't wnt 2 cut the springs neither heat dem , i was looking at b13 drop low springs but not i'm sure if it cld work, but if u cld advice me on dese things it wld b greatly appreciated .

User avatar
X2Board
2NRholic
Posts: 1014
Joined: April 18th, 2003, 7:53 pm
Location: working on this ^^^ project
Contact:

Re: For Dave and others with SR20de..optimising your SR20de

Postby X2Board » August 14th, 2012, 3:54 pm

man dig up an 8 year old thread here yes!
when names like Dave and art in motion in a thread it brings back days of tuner drags, tuner limes with a few kay donna runs in the mix

Gerard91
Street 2NR
Posts: 72
Joined: July 9th, 2012, 8:12 pm

Re: For Dave and others with SR20de..optimising your SR20de

Postby Gerard91 » August 15th, 2012, 6:38 am

so your'll don't lime again ?

Gerard91
Street 2NR
Posts: 72
Joined: July 9th, 2012, 8:12 pm

Re: For Dave and others with SR20de..optimising your SR20de

Postby Gerard91 » August 23rd, 2012, 7:30 pm

what type of oil 2 use in my sr18de

User avatar
TurboSingh12
Riding on 16's
Posts: 1261
Joined: November 24th, 2014, 9:24 am
Location: Japan

Re: For Dave and others with SR20de..optimising your SR20de

Postby TurboSingh12 » October 6th, 2017, 7:05 am

Gerard91 wrote:what type of oil 2 use in my sr18de


10W 40 Amsoil

User avatar
black start
TriniTuner 24-7
Posts: 7974
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: For Dave and others with SR20de..optimising your SR20de

Postby black start » October 6th, 2017, 9:43 am

TurboSingh12 wrote:
Gerard91 wrote:what type of oil 2 use in my sr18de


10W 40 Amsoil

I think 5 years later, he probably already got the answer

User avatar
TurboSingh12
Riding on 16's
Posts: 1261
Joined: November 24th, 2014, 9:24 am
Location: Japan

Re: For Dave and others with SR20de..optimising your SR20de

Postby TurboSingh12 » October 6th, 2017, 10:36 am

^^Better late than never :D

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 9 guests