Page 9 of 11
Re: SIMPLE BRAKE UPGRADES
Posted: June 7th, 2014, 12:04 am
by Mobile-Authority
i have a Y11 4wd
came with a qg18
wht brakes can i use ?
my bolt pattern is 4x114
i changed to drilled rotors for almera but i hearing a lil noise on one side
idk wht is it cause everyting bolt up normal
Re: SIMPLE BRAKE UPGRADES
Posted: June 15th, 2014, 7:58 pm
by yakuza
Mobile-Authority wrote:i have a Y11 4wd
came with a qg18
wht brakes can i use ?
my bolt pattern is 4x114
i changed to drilled rotors for almera but i hearing a lil noise on one side
idk wht is it cause everyting bolt up normal
yakuza wrote:W10 avenir 11” rotors and double piston callipers, direct bolt on for P10, P11, U13, U14, B15, N16, Y11-wingroad.
This set up can be found on the W10 Avenir and U13 bluebird that came with SR20DET, these disc pads are the same as A33 Cifero/Maxima.
11”rotors and large single piston callipers from the SR20VE equipped Y11 ZV-S, U14 and P11 are a direct bolt on for P10, P11, U13, U14, B15, N16, Y11-Wingroad also.
Re: SIMPLE BRAKE UPGRADES
Posted: June 19th, 2014, 8:49 pm
by swagz
Good day, I have an n16, recently did a rear conversion from drum to disc from the primera. I wanna upgrade the front as well. Thinking of the 11inch rotors with dual piston calipers. And upgrade the rear with the a33 rotors and calipers.
Question is would I need to change booster and master cylinder to get increased braking performance?
I currently have a 7/8 mc and a dual diaphragm. Looking to upgrade my qg18 to sr20ve.
Re: SIMPLE BRAKE UPGRADES
Posted: September 28th, 2014, 11:01 am
by ruff neck chicken
i got the ADV22F on a B14 and would like to get steel braided lines for the setup. do i buy the same B14 brake lines are the fittings the same?
http://performance.importrp.com/goodrid ... 97638.aspxanyone got part numbers for any good brake pads for the ADV22F brake set up?
Re: SIMPLE BRAKE UPGRADES
Posted: September 28th, 2014, 12:31 pm
by X_Factor
http://www.amazon.com/gp/product/B001C8 ... UTF8&psc=1those worked really nice
as for the brake lines, i bought regular b14 lines and they worked easily
Re: SIMPLE BRAKE UPGRADES
Posted: September 28th, 2014, 1:28 pm
by ruff neck chicken
i tried searching for that part number on ebc's website but no results
do you know the option in green stuff or anything a bit more than oem?
Re: SIMPLE BRAKE UPGRADES
Posted: September 28th, 2014, 2:04 pm
by yakuza
Stick to something of OEM quality, I don't recommend green stuff for a daily driver, the pads ware in no time and they are not forgiving on rotors.
Some brands you can check out are Hawk or PBR AXXIS.
Re: SIMPLE BRAKE UPGRADES
Posted: September 28th, 2014, 2:19 pm
by ruff neck chicken
ok thanks for the heads up on the daily driving. i will try the ebc oem replacements while i find the hawk options. part number?
Re: SIMPLE BRAKE UPGRADES
Posted: September 28th, 2014, 3:32 pm
by X_Factor
what engine setup you have?
Re: SIMPLE BRAKE UPGRADES
Posted: September 28th, 2014, 3:43 pm
by yakuza
One that requires better brakes than AD22VF.
Re: SIMPLE BRAKE UPGRADES
Posted: September 28th, 2014, 5:41 pm
by X_Factor
hahaha
well link up the man nah boy!
Re: SIMPLE BRAKE UPGRADES
Posted: September 28th, 2014, 9:32 pm
by THE SYNDICATE
I use nationals.
Sr20de
Re: SIMPLE BRAKE UPGRADES
Posted: September 29th, 2014, 2:01 am
by ruff neck chicken
my setup might need more than the AD22VF but that is just more weight so i'm just trying to maximize what i can get out of these. good rotors, pads, steel braided lines for now.
Re: SIMPLE BRAKE UPGRADES
Posted: October 2nd, 2014, 8:02 pm
by THE SYNDICATE
This is what I upgraded to from the ad18v's.
Re: SIMPLE BRAKE UPGRADES
Posted: November 10th, 2014, 6:05 pm
by MZ88
hello,
what brakes upgrade would you recommend for a 2009 tiida hatchback, my car is supercharged and the brake system doesn't match the car speed.
Re: SIMPLE BRAKE UPGRADES
Posted: November 10th, 2014, 6:12 pm
by subie_2NR
MZ88 wrote:hello,
what brakes upgrade would you recommend for a 2009 tiida hatchback, my car is supercharged and the brake system doesn't match the car speed.
Double piston brake setup from a Nissan, steel braided lines & rear disc conversion
Re: SIMPLE BRAKE UPGRADES
Posted: June 6th, 2015, 12:22 am
by nicko
what do you guys recommend for a rear upgrade for a b14 i did the p11m6 conversion for the front and wanted to know if i need an entire p11 banjo or just spindles for the back so ill be far hole pattern through out
Re: SIMPLE BRAKE UPGRADES
Posted: June 7th, 2015, 1:02 am
by LadiesMan217
yakuza wrote:P11 rear disc set up is a direct bolt up for N16, B15, however the later model N16 and B15 ABS system is not compatible with the P11 ABS system.
W11 Avenir 11"x1" rotors and double piston calipers are a direct bolt on upgrade for A33.
P11/Y11 (SR20VE equipped) 11"rotors and calipers are a direct bolt on upgrade for B15 and N16, as well as P11 and Y11 (non AD wagon) that came with 10" rotors.
Will B14 manual front axle splines mesh correctly on B15 front spindles??
Thanks..
Re: SIMPLE BRAKE UPGRADES
Posted: July 19th, 2015, 11:31 am
by SENTEKS
Hi guys , o have b11 , and i will replace my rear drums to a p11 primera disc brakes. Do i need to replace my stock mc ? front brackes are stock.
Re: SIMPLE BRAKE UPGRADES
Posted: July 21st, 2015, 2:22 pm
by X_Factor
anyone ever bought disc pads off amazon for an almera?
if so care to share a link....looking at raybestos and akebono but not sure of the part number
Re: SIMPLE BRAKE UPGRADES
Posted: August 10th, 2015, 10:16 pm
by Death_ride
Best front brakes upgrade keeping the bolt line up 4x100? b14 splines must be able to work.
Re: SIMPLE BRAKE UPGRADES
Posted: August 10th, 2015, 10:59 pm
by black start
Y11 ad
Re: SIMPLE BRAKE UPGRADES
Posted: August 11th, 2015, 4:20 am
by yakuza
AD wagon calipers won't bolt on B14 spindles.
The biggest bolt on brake upgrade for B14 spindles is the Wilwood set up.
Other than that it's AD22VF.
Re: SIMPLE BRAKE UPGRADES
Posted: August 11th, 2015, 5:00 am
by Death_ride
if i had to put a w10 avenir upgrade what must done to make it work? thats the double piston version...
Re: SIMPLE BRAKE UPGRADES
Posted: August 11th, 2015, 7:49 am
by yakuza
AD (Y11) wagon spindles
Re: SIMPLE BRAKE UPGRADES
Posted: August 11th, 2015, 4:10 pm
by triplef_17
What about a brakes upgrade for a tb17 sylphy??
Re: SIMPLE BRAKE UPGRADES
Posted: October 1st, 2015, 7:04 am
by skylinechild
good day gents....planining a brake upgrade on my u14
for the front i'm planing on using the skyline R32 rotor and caliper.
i already know the rotor has to be re drilled to 4 X 114 and shaved a couple thousandths off the circumference.
caliper will be sandblasted /powder coated and rebuilt before use. ( new seals en route)
for the rear i'm going with the disc brake assembly for the u14 -oem stuff.
only thing i need help with is steel braided lines. where can i get and is there any sort of specific size to it.??
Re: SIMPLE BRAKE UPGRADES
Posted: October 1st, 2015, 8:32 am
by yakuza
The Goodridge B14 steel braided lines will work, part# 22043.
Re: SIMPLE BRAKE UPGRADES
Posted: October 1st, 2015, 8:56 am
by Ted_v2
If you looking for something local. Trinidad hose does braided brake lines. Heard plenty good reviews from people.
Re: SIMPLE BRAKE UPGRADES
Posted: October 1st, 2015, 2:21 pm
by skylinechild
yakuza wrote:The Goodridge B14 steel braided lines will work, part# 22043.
thank you kindly sir...
another noob question..where can i purchase em..iirc nick (tuner imports) has goodridge...do i just walk in and tell him the part # for the brake hose??
Ted_v2 wrote:If you looking for something local. Trinidad hose does braided brake lines. Heard plenty good reviews from people.
thought about them but i do not know the type of fitting used or size of fitting on the end of the hose
better i just go with something already made with correct ends.
anything else i need to know about brakes before i do this upgrade.???
do i need to change my booster..??