Page 1 of 1
Cifero 200jk parts needed
Posted: January 14th, 2011, 7:30 pm
by devrat
Need to get a steering pump, mounts and cradle bushings.
Can anyone point me in the right direction.
Re: Cifero 200jk parts needed
Posted: January 14th, 2011, 8:40 pm
by triniringo
got a steering pump call me 6205199
Re: Cifero 200jk parts needed
Posted: January 14th, 2011, 9:31 pm
by ~Vēġó~
you can PM Industrico with your chassis number wrt the mounts........
other than that the mounts you could get at the motorist (marabella or couva)....front mount is like $2400, rear is $1700 and both side mounts a bit over $500 each....
unsure about the cradle bushings....they more than likely would tell you that they don't sell the bushings and that you would need to buy an entire cradle (can't remember the price though....but I'm thinking I paid either $1200 or $2200 for one)
Re: Cifero 200jk parts needed
Posted: January 14th, 2011, 9:36 pm
by ~Vēġó~
oh darn, devrat, the prices quoted for the engine mount are for the vq23de/35de motors and NOT the qr20 motor which is for the 200jk....sorry about that.
Re: Cifero 200jk parts needed
Posted: January 14th, 2011, 10:03 pm
by devrat
^^^^^Thanks Vega.....the mounts are not very bad but i'll change them anyway as I'm working on the car.
Re: Cifero 200jk parts needed
Posted: January 15th, 2011, 9:47 am
by ~Vēġó~
call these people as well......they had many cuts of the J31...
Auto Stock: 655-5331, 390-6318
Located main rd., princes town.....near the wasa sub-station.
Have you called M&N? they usually have oem parts as well......a couple hundred dollars less than massey/motorist.
Re: Cifero 200jk parts needed
Posted: January 17th, 2011, 10:06 pm
by ~Vēġó~
what the mechanic say dev???? rack?